Sharp MX-M623 MX-M623 MX-M753 Operation Manual - Page 438

FACSIMILE CHECKING THE IMAGE TO BE TRANSMITTED (Preview) If you touch the [Preview] key before scanning the original, you can check the scanned image in the touch panel before sending the image. * The factory default setting is disabled. Depending on the size of the transmission data, part of the preview image may not appear in the preview screen in the touch panel. 1 Place the original. Place the original face up in the document feeder tray, or face down on the document glass. 2 Scan Internet Fax Fax USB Mem. Scan PC Scan Address Book Original Scan: Auto 8½x11 Send: Auto Direct TX Exposure Auto Sub Address Resolution Standard Address Review Special Modes File Quick File Preview Auto Reception Fax Memory:100% Touch the [Preview] key to highlight it. Select transmission settings and press the [START] key. 3 "Originals are being read" appears while the originals are being scanned, and when scanning is finished, the preview screen appears on the touch panel. Transmission will not take place until you touch the [Start Sending] key in the preview screen. Preview 4 0001 /0010 B/W Function Rev. Display Rotation Start Sending Check the preview image and then touch the [Start Sending] key. Transmission begins. For information on the preview screen, see "PREVIEW CHECK SCREEN" (page 4-58). System settings (administrator): Default Preview You can specify whether or not the [Preview] key function will be enabled in the base screens of the image send modes and in the address book. 4-57 Contents