Sharp MX-M623 MX-M623 MX-M753 Operation Manual - Page 460

FACSIMILE (1) Fax/Special Modes Timer (2) (3) OK Cancel OK Day of the Week --- Time 10 hh. 00 mm. 4 Set the time with the keys. (1) Specify the day. If you do not wish to specify a day, select [---]. In this case, transmission will begin when the time specified in (2) arrives. (2) Specify the time (hour, minute) Select the time in 24-hour format. You can also directly touch a numeric display key to change the setting with the numeric keys. (3) Touch the [OK] key. When this screen is opened, the setting will show the current time. If the time is not correct, press the [CLEAR ALL] key ( ) to cancel the operation. Correct the time in the system settings and then perform the timer transmission procedure. ☞ CHECKING THE DATE AND TIME (page 4-6) Press the [START] key. Scanning begins. • If you inserted the original pages in the document feeder tray, all pages are scanned. 5 A beep will sound to indicate that scanning is finished. • If you are scanning the original on the document glass, scan each page one page at a time. When scanning finishes, place the next original and press the [START] key. Repeat until all pages have been scanned and then touch the [Read-End] key. A beep will sound to indicate that scanning is finished. • The time can be specified up to a week in advance. • Up to 94 timer transmissions can be stored at once. • Only one timer polling operation can be stored at once. If you wish to poll multiple machines, store a serial polling timer operation. • If another transmission is in progress when the specified time arrives, the timer operation will begin after that transmission is finished. • Other operations can be performed after a timer transmission is set up. • This function cannot be used in direct transmission mode or when the speaker is used to dial. • If a timer transmission is given priority in the job status screen, the time specification is canceled. The transmission will begin as soon as the job in progress is completed. ☞ GIVING PRIORITY TO A RESERVED FAX JOB (page 4-134) To cancel timer transmission... Touch the [Cancel] key in the screen of step 4. 4-79 Contents