Sharp MX-M623 MX-M623 MX-M753 Operation Manual - Page 504

FACSIMILE RELAY BROADCAST TRANSMISSION USING F-CODES When your machine receives an F-code relay request transmission, the fax is received to an F-code relay broadcast memory box in your machine. Your machine then relays the fax to each of the end receiving machines programmed in the memory box. Transmission to the end receiving machines takes place automatically. The other machine The machine F-code relay broadcast memory box The fax is transmitted to each of the end receiving machines programmed in the F-code relay broadcast memory box. Transmission End receiving machines Transmission specifying an F-code Sub-address: AAAAAAAA Passcode: XXXXXXXX Box name: Sub-address: Passcode: BBBB AAAAAAAA XXXXXXXX End receiving machines are programmed in this box • Prior to the operation, inform the requesting party of the sub-address and passcode of the relay broadcast memory box in your machine. • Program the end receiving machines in the F-code relay broadcast memory box when you create the box in your machine. ☞ CREATING MEMORY BOXES IN THE MACHINE FOR F-CODE COMMUNICATION (page 4-109) • The end receiving machines do not need to support F-code communication. • The machine that requests a relay broadcast transmission only bears the cost of sending the fax to your machine (the relay machine). Your machine bears the cost of sending the fax to each of the end receiving machines. • When faxes forwarded using this function are printed at the forwarding destination, the date and time of reception cannot be printed on the faxes. ("Receiving Date & Time Print" is disabled.) 4-123 Contents