Sharp MX-M623 MX-M623 MX-M753 Operation Manual - Page 669

DOCUMENT FILING [Original] key When the [Original] key is touched, the following screen appears. This screen is used to change the original size and select scanning settings for 2-sided originals. (1) (2) (4) Scan to HDD/Original OK Original Scan Size 100% Store Size Auto 8½x11 Auto 2-Sided Booklet 2-Sided Tablet Image Orientation (3) (1) Touch the [Scan Size] key. If the original is a non-standard size that cannot be detected by auto original size detection, touch the [Scan Size] key and specify the original size. (2) Touch the [Store Size] key. If you wish to store the file at a different size than the original size, touch the [Store Size] key and change the store size. (3) Touch the appropriate orientation key. If the top edge of the original is up, touch the key. If the top edge of the original is to the left, touch the key. If the original is a 2-sided original, touch the [2-Sided Booklet] key or the [2-Sided Tablet] key as appropriate for the original type. (4) Touch the [OK] key. The settings are stored and you return to the Scan to HDD screen. [Exposure] key To adjust the exposure, touch the [Exposure] key. Select an appropriate exposure mode for the original and touch the or key to adjust the exposure level. When finished, touch the [OK] key. (3) Exposure Scan to HDD/Exposure Auto Manual 1 3 5 Original Image Type Text Text/ Prtd.Photo Printed Photo Photo OK Text/Photo Map Moiré Reduction (2) (A) (1) (1) Select the appropriate original type for the original to be scanned. (2) Select [Auto] or [Manual]. If you selected [Manual], touch the or key to adjust the exposure. (For a darker image, touch the key. For a lighter image, touch the key.) When the exposure is set to [Auto], the keys cannot be used. (A): Moirè Reduction To reduce the moirè effect when scanning printed matter, touch the [Moirè Reduction] checkbox so that a checkmark appears. (3) Touch the [OK] key. The settings are stored and you return to the Scan to HDD screen. 6-19 Contents