Sharp MX-M623 MX-M623 MX-M753 Operation Manual - Page 71

BEFORE USING THE MACHINE TRAY SETTINGS FOR TRAY 1 TO 4 LOADING PAPER IN PAPER TRAY 1 - TRAY 2 8-1/2" x 11" or A4 size paper can be loaded in tray 1 and tray 2. These are parallel large-capacity trays that allow a total of approximately 2000 sheets of SHARP standard paper (20lbs. (80g/m2)) to be loaded. If you wish to change the paper size of tray 1 or tray 2, see "CHANGING THE PAPER SIZE IN PAPER TRAY 1 - TRAY 2" on the next page. Pull out paper tray 1-tray 2. Gently pull the tray out until it stops. 1 Indicator line Load paper in the left and right trays. Lift the paper guide and load paper in tray 1.*1 Approximately 800 sheets of SHARP standard paper (20lbs.(80g/m2)) can be loaded. Be sure to return the paper guide to its original position after loading the paper. Lift the paper guide and load paper in tray 2.*1 Approximately 1200 sheets of SHARP standard paper (20lbs. 2 (80g/m2)) can be loaded. Indicator line *1 The paper stack must not be higher than the indicator line. Gently push tray 1-tray 2 into the machine. Push the tray firmly all the way into the machine. 3 Set the paper type. 4 If the paper size was changed from an inch size to an AB size, or from an AB size to an inch size, or if the paper type was changed, be sure to change the appropriate settings as explained in "Paper Tray Settings" (page 7-13) in the System Settings. 1-30 Contents