Sharp MX-M623 MX-M623 MX-M753 Operation Manual - Page 713

SYSTEM SETTINGS Default Settings The default settings for operation of the machine can be configured. Touch the [Default Settings] key and select the settings. Clock Adjust Use this to set the date and time in the machine's built-in clock. Set the time. Item Specify Time Zone Date&Time Settings Synchronize with Internet Time Server Settings If your region is ahead of GMT (Greenwich Mean Time), select [+]. If your region is behind GMT, select [-]. Next, specify the time difference between your region and GMT in hours and minutes. Select and set the year, month, day, hour, and minute. This can be used when the machine is connected to the Internet. The machine's time is automatically adjusted to the time of an Internet time server. Daylight Saving Time Setting Enable daylight saving time. Item Settings Daylight Saving Time Setting Select whether or not the Daylight Saving Time Setting is enabled. If disabled, the following settings will not be possible. Select Setting Type Specify whether the starting and ending day of daylight saving time are to be set using the day of the week or the date. Start Time Set the starting time of daylight saving time. Set the starting month. If you selected "Day of the Week" in "Select Setting Type", set the starting week of daylight saving time and then the starting day. If you selected "Date" in "Select Setting Type", set the starting date. Set the hour and minute and the UTC (Coordinated Universal Time) setting. Completing Time Set the ending time of daylight saving time in the same way as you set the starting time. Adjustment Time Set the time that adjustment will take place when daylight saving time begins. Date Format The format used to print the date on lists and other output can be changed. Item Settings Current Setting The current time appears in the format set in the date format settings. Format Set the order of display of the year, month, and day (YYYY/MM/DD). Separator Select one of three symbols or a blank space for the separator used in the date. Day-Name Position Select whether the day name appears before or after the date. Time Display Select 12-hour format or 24-hour format for the time. 12-Hour Display: 12:00AM to 11:59AM/12:00 to 11:59PM 24-Hour Display: 00:00 to 23:59 If "Disabling of Clock Adjustment" (page 7-65) has been enabled in the system settings (administrator), the date and time cannot be set. 7-11 Contents