Sharp MX-M623 MX-M623 MX-M753 Operation Manual - Page 72

BEFORE USING THE MACHINE 5 Loading paper in paper tray 1/tray 2 is now complete. CHANGING THE PAPER SIZE IN PAPER TRAY 1 TRAY 2 To change the paper size of tray 1 - tray 2, follow the steps below. This section only explains how to change the paper size. For the procedures for opening/closing the tray and loading paper, see "LOADING PAPER IN PAPER TRAY 1 - TRAY 2" (page 1-30). Tray 1 Tray 2 Remove the paper size guide. With the base of the tray pressed all the way down, hold down the hook at the bottom on the paper size guide and pull the paper size guide up slightly. 1 Hook Paper guide • Do not place heavy objects on the tray or press down on the tray. • Before changing the paper size of tray 1, raise the paper guide. (A) LT A4 2 Adjust the paper size guide to the paper (B) size to be used. Paper sizes are inscribed at the slot (A) on the bottom of the A4 tray and at the hole (B) at the top of the paper size guide. ("LT" LT indicates 8-1/2" x 11" size.) Align the bottom of the paper size guide with the slot, and align the hole at the top with the locking tab. • When attaching the paper size guide, make sure that the top and bottom of the guide are aligned to the same paper size. • If the top and bottom of the paper size guide are not aligned to the same paper size, skewed feeding and misfeeds will result. Push in the paper guide so that it locks into place. Push the paper size guide in until the hook at the bottom locks into place. (You will hear a "click" when the hook locks.) Move 3 the paper size guide slightly to verify that it has locked into place. 1-31 Contents