Sharp MX-M623 MX-M623 MX-M753 Operation Manual - Page 779

SYSTEM SETTINGS Printer Settings Settings related to the printer function can be configured. Touch the [Printer Settings] key to configure the settings. These settings can be used when the printer function is enabled. Default Settings Printer condition settings are described below. Prohibit Notice Page Printing This setting is used to disable printing of notice pages. Prohibit Test Page Printing This setting is used to disable printing of test pages. When this setting is enabled, "Printer Test Page" in the system settings cannot be used to print test pages. A4/Letter Size Auto Change When printing an A4 size image, this setting allows letter (8-1/2" x 11") size paper to be used if A4 size paper is not loaded. Print Density Level This lightens or darkens the print density of images. The print density can be adjusted to five levels. Bypass Tray Settings Enable Detected Paper Size in Bypass Tray This is used to prohibit printing when the paper size specified for a print job is different from the paper size inserted in the bypass tray. Enable Selected Paper Type in Bypass Tray This is used to prohibit printing when the paper type specified for a print job is different from the paper type inserted in the bypass tray. Exclude Bypass-Tray from Auto Paper Select When [auto] is selected for paper type selection, the bypass tray can be excluded from the trays that can be selected. This is recommended when special media is often placed in the bypass tray. Job Spool Queuing When this function is enabled, received print jobs are displayed in the spool queue of the job status screen. The jobs are moved to the job queue after they have been analyzed by the machine. Multiple jobs that have not yet been analyzed can appear in the spool queue. When this function is disabled, received print jobs are displayed in the job queue without being displayed in the spool queue. However, when an encrypted PDF job is printed, the job appears in the spool queue. Disabling of USB Memory Direct Print This setting is used to disable printing of files on USB memory. When this setting is enabled, "USB Memory" in the External Data Access screen cannot be used to print files. Disabling of Network Folder Direct Print This setting is used to disable printing of files on network folders. When this setting is enabled, "Network Folder" in the External Data Access screen cannot be used to print files. 7-77 Contents