Sharp MX-M623 MX-M623 MX-M753 Operation Manual - Page 813

SYSTEM SETTINGS Original Print on Transaction Report When a transaction report is printed for a memory transmission, this is used to print part of the first page of the transmitted original on the transaction report. Select one of the settings below. • Print Out All Report • Print Out Error Report Only • No Printed Report This setting will not be effective if "Transaction Report Print Select Setting" below is set to "No Printed Report". Transaction Report Print Select Setting This is used to select whether or not a transaction report will be printed, and if printed, the condition for being printed. Select a setting for each of the following operations: Single Sending • Print Out All Report • Print Out Error Report Only • No Printed Report Broadcasting • Print Out All Report • Print Out Error Report Only • No Printed Report Receiving • Print Out All Report • Print Out Error Report Only • No Printed Report Confidential Reception • Print Out Notice Page • No Printed Report When a transaction report is printed, you can have part of the first page of the transmitted original printed on the transaction report. For more information, see "Original Print on Transaction Report". When transaction report printing is set for "Receiving", a report will not be printed for a reception from a number specified as a reject number in "Allow/Reject Number Setting" (page 7-114). Activity Report Print Select Setting This is used to have the Image Sending Activity Report that is stored in the machine's memory printed at regular intervals. The Image Sending Activity Report can be set to automatically print each time the number of transactions reaches 201, and it can also be set to automatically print at a specified time (once a day only). (The settings can be simultaneously enabled.) • If you only select the "Print Daily at Designated Time" setting and the number of recorded transactions exceeds 201 before the specified time, each new transaction will delete the oldest transaction (the oldest transaction will not be printed). • The Image Sending Activity Report can also be printed manually. See "List Print (Administrator)" (page 7-92). ECM Line conditions can sometimes distort a transmitted fax image. When ECM (Error Correction Mode) is turned on, pages that are distorted are automatically re-transmitted. If the other machine supports Super G3, ECM will function regardless of this setting. Distinctive Ring Detection If multiple telephone numbers have been assigned to your telephone line, the number called can be identified by its ringing pattern. By using one number for voice calls and another number for faxes, you can tell which type of call you are receiving by the ringing pattern. You can set your machine to automatically receive faxes when your fax number is called by setting the pattern that corresponds to your fax number. Six selections are available. 7-111 Contents