Sharp MX-M623 MX-M623 MX-M753 Operation Manual - Page 831

TROUBLESHOOTING (7) Paper misfeed in the bypass tray Remove the misfed paper from the bypass tray. Be careful not to tear the misfed paper during removal. (8) Paper misfeed in the bypass tray (side) Open the side cover and remove the misfeed. (9) Paper misfeed in tray 3 and tray 4 (side) Open the lower cover on the left side of the machine. Grasp the finger hold and gently open the unit. Remove the misfed paper. Be careful not to tear the misfed paper during removal. (10) Paper misfeed in tray 1 to tray 4 (in the tray) Remove the misfed paper. Turn roller rotating knob A in the direction of the arrow to remove the misfed paper. Roller rotating knob A A misfeed may occur inside the compartment, so please check the entire compartment carefully. If misfed paper is not found in the previous step's illustration, pull out paper tray 1 - tray 2 and remove the misfed paper. Grasp the finger hold and gently open the unit. Pull the tray all the way out until it stops. If paper is misfed in tray 1 (left-side tray)... Lift the paper guide and remove the misfed paper. Be sure to replace the paper guide in its original position after removing the paper. If paper is misfed in tray 2 (right-side tray)... A misfeed may occur inside the compartment, so please check the entire compartment carefully. When using tray 2, bypass tray or large capacity tray, check the paper transfer unit inside the tray and remove any misfed paper. 8-12 Contents