Sharp MX-M623 MX-M623 MX-M753 Operation Manual - Page 832

TROUBLESHOOTING If misfed paper is not found in the previous step's illustration, pull out paper tray 3 and remove the misfed paper. Pull the tray all the way out until it stops. Check the paper transfer unit inside the tray. Be careful not to tear the misfed paper during removal. (11) Paper misfeed in the output area Be careful not to tear the misfed paper during removal. (12) Paper misfeed in the saddle stitch finisher (top) Open the upper cover of the (A) finisher/saddle stitch finisher. When an inserter is installed, lift the tray of the inserter. Lift knob (A) (see the previous step's illustration), then remove any misfed paper. Be careful not to tear the (B) misfed paper during removal. Lift knob (B) (see the previous step's illustration) and remove any misfed paper. Be careful not to tear the misfed paper during removal. When a punch module is installed. Open the front cover of the finisher/saddle stitch finisher. Rotate the green knob until (A) the arrow is within the range (A) on the label, and remove the misfed paper. Be careful not to tear the misfed paper during removal. Close the front cover of the finisher/saddle stitch finisher. 8-13 Contents