Sharp MX-M623 MX-M623 MX-M753 Operation Manual - Page 846

TROUBLESHOOTING PRINTING PROBLEMS RELATED TO PRINTING OPERATION • Printing does not take place 8-27 • Two-sided printing does not take place 8-29 • Direct printing of a file in a shared folder on a computer is not possible 8-29 • A tray, finisher, or other peripheral device installed on the machine cannot be used 8-29 PROBLEMS RELATED TO PRINT RESULTS • The image is grainy 8-30 • The image is too light or too dark 8-30 • Text and lines are faint and difficult to see 8-30 • Part of the image is cut off 8-30 • The image is upside down 8-31 • Many nonsense characters are printed 8-31 • If you cannot find the item that you are looking for in the above table of contents, see "GENERAL PROBLEMS" (page 8-47). • If you are unable to solve a problem using the solutions in this manual, switch off the [POWER] key ( ) and the main power switch. Wait at least 10 seconds, and then switch on the main power switch and the [POWER] key ( ) in that order. When the LINE indicator is lit or the DATA indicator is lit or blinking, do not switch off the main power switch or unplug the power plug. This may damage the hard drive or cause the data being stored or received to be lost. PROBLEMS RELATED TO PRINTING OPERATION Problem Printing does not take place. Point to check Is your computer connected correctly to the machine? Is the machine connected to the same network (LAN, etc.) as your computer? Solution Make sure that the cable is connected securely to the LAN connector or the USB connector on your computer and the machine. If you are on a network, check the connections at the hub as well. ☞ 1. BEFORE USING THE MACHINE "SIDE AND BACK" (page 1-7) The machine must be connected to the same network as your computer. If you do not know which network the machine is connected to, ask the network administrator. 8-27 Contents