Sharp MX-M623 MX-M623 MX-M753 Operation Manual - Page 875

TROUBLESHOOTING Problem The inserter does not operate. Paper misfeed occurs A paper misfeed occurs when paper is fed from the inserter. A message appears each time paper is placed in the paper tray of the inserter. Point to check Are any inserter covers open? Close all covers. Solution "Disabling of inserter" is enabled in the administrator settings. Check with your administrator. Check the administrator settings and disable "Disabling of inserter". A paper misfeed message appears. Remove the misfed paper. ☞ "REMOVING MISFEEDS" (page 8-8) The [START] key light is not illuminated. Make sure that the punch or staple key has been selected on the operation panel of the inserter. ☞ 1. BEFORE USING THE MACHINE "MANUAL OPERATION OF THE INSERTER" (page 1-63) The paper is curled or damp. Do not use curled or folded paper. When the inserter is not going to be used for a long time, remove the paper from the inserter, place it in a bag so that it does not absorb moisture, and store it in a cool and dark place. Do the size and orientation of the loaded paper match the paper size and orientation set in "Setting the paper type and paper size"? Make sure paper size and orientation set in "Setting the paper type and paper size" match the size and orientation of the loaded paper. Was the [SIZE SELECT] key touched and the size and orientation of the paper for the inserter set as explained in "Setting the paper type and paper size"? To ensure that the correct paper (size and orientation) is loaded in the inserter, the machine indicates the current paper size setting each time paper is placed in the paper tray. 8-56 Contents