Sharp MX-M623 MX-M623 MX-M753 Operation Manual - Page 94

Replacing the cartridge in the finisher BEFORE USING THE MACHINE Open the front cover of the finisher. 1 Lower the blue lever in the stapler and slide out the staple cartridge. 2 Pull the empty staple case straight up and out of the cartridge. 3 Insert a new staple case into the cartridge. Push the staple case all the 4 way in until it clicks into place. Do not remove the seal holding the staples until the staple case is set in the cartridge. Pull the seal that holds the staples straight out. 5 Insert the cartridge all the way in until it clicks into place. 6 Insert the cartridge all the way in until it clicks into place. 1-53 Contents