Sharp OLR-751 IR Touch Overlay Installation Guide for the
Sharp OLR-751 Manual
View all Sharp OLR-751 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp OLR-751 manual content summary:
- Sharp OLR-751 | IR Touch Overlay Installation Guide for the - Page 1
IR Touch Overlay Installation Guide for the OLR-751 1.0 Contents Guide Purpose Notes and Warnings Equipment Dimensional Drawings overlay. 3.6 Contact NEC Display Solutions support if you have any questions or require additional installation guidance support. 500 Park Boulevard, Suite 1100 - Sharp OLR-751 | IR Touch Overlay Installation Guide for the - Page 2
IR Touch Overlay Installation Guide for the OLR-751 4.0 Equipment (1) C751Q IR Overlay NEC Display Solutions of America, Inc. Rev 1.0 (1) Spare #6-32 Philips flathead machine screw 5.0 Dimensional Drawings (1) 10ft. USB Extension Cable www.necdisplay.com OLR-751 2 - Sharp OLR-751 | IR Touch Overlay Installation Guide for the - Page 3
IR Touch Overlay Installation Guide for the OLR-751 NEC Display Solutions of America, Inc. Rev 1.0 6.0 Installation Procedure 6.1 Remove the overlay from the packaging. Place the overlay face down on a - Sharp OLR-751 | IR Touch Overlay Installation Guide for the - Page 4
NEC Display Solutions of America, Inc. IR Touch Overlay Installation Guide for the OLR-751 Rev 1.0 6.5 With the help from at least one partner, gently install the overlay on the monitor. 6.5.1 Hook the top bracket of
1
NEC Display Solutions of America, Inc.
www.necdisplay.com
OLR
-
751
IR Touch Overlay
Installation Guide for the OLR
-
751
Rev 1.0
1.0
Contents
Guide Purpose
Page 1
Notes and Warnings
Page 1
Equipment
Page 2
Dimensional Drawings
Page 2
Installation Procedure
Page 3
2.0
Purpose
2.1
This procedure describes the steps to install the IR touch overlay onto the C751Q display.
3.0
Notes and Warnings
3.1
Prior to installing the overlay, remove the NEC badge from the bottom edge of the monitor.
3.2
The overlay contains tempered glass.
Use caution when handling.
3.3
The overlay has an integrated USB cable located along the bottom edge of the overlay.
Ensure the
cable is not pinched, crushed, or damaged during installation.
3.4
Installation requires two persons at all times to ensure the touch frame does not bend or torque.
3.5
Once the touch screen is installed, do not lift the monitor by grasping or holding the touch screen
overlay.
3.6
Contact NEC Display Solutions support if you have any questions or require additional installation
guidance support.
500 Park Boulevard, Suite 1100
Itasca, IL 60143
Phone:
(800) 632
-
4662