Sharp PG-F200X Operation Manual
Sharp PG-F200X - Notevision XGA DLP Projector Manual
 |
UPC - 074000365438
View all Sharp PG-F200X manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp PG-F200X manual content summary:
- Sharp PG-F200X | Operation Manual - Page 1
DATA PROJECTOR MODEL PG-F200X OPERATION MANUAL Introduction Quick Start Setup Connections Basic Operation Useful Features Appendix - Sharp PG-F200X | Operation Manual - Page 2
IMPORTANT • For your assistance in reporting the loss or theft of your Projector, please record the Model and Serial Number located on the bottom of the projector and retain this information. • Before recycling the packaging, please ensure that you have checked the contents of the carton thoroughly - Sharp PG-F200X | Operation Manual - Page 3
SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fitted with a non-rewireable serious electric shock may occur. To fit an appropriate plug to the mains lead, follow the instructions below: WARNING: THIS APPARATUS MUST BE EARTHED. IMPORTANT: The wires in this mains lead are - Sharp PG-F200X | Operation Manual - Page 4
English, German, French, Spanish, Italian, Dutch, Swedish, Portuguese, Chinese and Korean. Carefully read through the operation instructions before operating the projector. Die mitgelieferte CD-ROM enthält Bedienungsanleitungen in Englisch, Deutsch, Französisch, Spanisch, Italienisch, Niederländisch - Sharp PG-F200X | Operation Manual - Page 5
moisture. See bottom of projector. CAUTION RISK OF ELECTRIC SHOCK. DO NOT REMOVE SCREWS EXCEPT SPECIFIED USER SERVICE SCREW. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS EXCEPT LAMP UNIT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning - Sharp PG-F200X | Operation Manual - Page 6
, pursuant to Part 15 of the with the operation manual, may cause which case the user will be required lamp recycling organization www.lamprecycle.org, or Sharp at 1-800-BE-SHARP. U.S.A. ONLY Caution Concerning Lamp Replacement See "Replacing the Lamp" on page 50. This SHARP projector uses a DLP - Sharp PG-F200X | Operation Manual - Page 7
. • In this operation manual, the illustration and the Bright Red Blue CLR Temp Bright Boost Lamp Setting Reset PRJ - ADJ Standard 0 0 0 projector. Note .........Indicates additional information for setting up and operating the projector. For Future Reference Maintenance P. 47 Troubleshooting - Sharp PG-F200X | Operation Manual - Page 8
Access the PDF Operation Manuals 9 Accessories 10 Part Names and Functions 11 Inserting the Batteries 14 Usable Range 15 Quick Start Quick Start 16 Setup Setting up the Projector 18 Setting up the Projector 18 Standard Setup (Front Projection) ....... 18 Ceiling-mount Setup 18 Projection - Sharp PG-F200X | Operation Manual - Page 9
Lamp 50 Lamp 50 Caution Concerning the Lamp 50 Replacing the Lamp 50 Removing and Installing the Lamp Unit 51 Resetting the Lamp Timer 52 Connecting Pin Assignments 53 RS-232C Specifications and Command Settings 55 Computer Compatibility Chart 60 Troubleshooting 61 For SHARP Assistance - Sharp PG-F200X | Operation Manual - Page 10
the following basic rules for its installation, use and servicing. 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions The safety and operating instructions should be retained for future reference. 3. Heed Warnings All - Sharp PG-F200X | Operation Manual - Page 11
way. f. When the product exhibits a distinct change in performance, this indicates a need for service. 19. Replacement Parts When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original - Sharp PG-F200X | Operation Manual - Page 12
of glass par- ticles if lamp ruptures. In case of lamp rupture, contact your nearest Sharp Authorized Projector Dealer or Service Center for replacement. See "Replacing the Lamp" on page 50. Caution concerning the setup of the projector ■ For minimal servicing and to maintain high image quality - Sharp PG-F200X | Operation Manual - Page 13
the AC outlet and turning off the equipment to be connected. ■ Please read the operation manuals of the projector and the equipment to be connected for instructions on how to make the connections. Using the projector in other countries ■ The power supply voltage and the shape of the plug may vary - Sharp PG-F200X | Operation Manual - Page 14
manual (this manual and CD-ROM ) Note • Codes in "< >" are Replacement parts codes. Optional accessories ■ 3 RCA to mini D-sub 15 pin cable (10n (3.0 m)) ■ DIN-D-sub RS-232C adaptor (5 57/64" (15cm)) ■ Remote receiver ■ Lamp unit ■ Ceiling-mount adaptor ■ Ceiling - Sharp PG-F200X | Operation Manual - Page 15
Introduction Part Names and Functions Numbers in Z refer to the main pages in this operation manual where the topic is explained. Projector Top View Power indicator 25, 48 STANDBY/ON 25 button For turning the power on and putting the projector into standby mode. ENTER button For setting 37 - Sharp PG-F200X | Operation Manual - Page 16
Part Names and Functions (Continued) Numbers in Z refer to the main pages in this operation manual where the topic is explained. for controlling the projector using a computer. 34 USB terminal Terminal connecting with the USB terminal on the computer for using the supplied remote control as the - Sharp PG-F200X | Operation Manual - Page 17
putting the projector into the 32 For lowering the noise of the cooling fan and extending the lamp life. 25 ON button For turning the power on. 33 when with the USB connection (using a USB cable or the optional remote receiver). • For returning to the previous menu screen during menu operations - Sharp PG-F200X | Operation Manual - Page 18
Part Names may cause old batteries to leak. • Remove the batteries from the remote control once they have run out, as leaving them in can cause them first and then remove them using a cloth. • The batteries included with this projector may run down in a short period, depending on how they are kept. - Sharp PG-F200X | Operation Manual - Page 19
using the remote control • Ensure that you do not drop it or expose it to moisture or high temperature. • The remote control may malfunction under a fluorescent lamp. In this case, move the projector away from the fluorescent lamp. 30° 23n (7 m) Remote control Remote control signal transmitters - Sharp PG-F200X | Operation Manual - Page 20
screen _P. 18 2. Connect the projector to the computer and plug the power cord into the AC socket of the projector When connecting equipment other than a computer, see pages 22 and 23. _PP. 21, 24 3. Remove the lens cap and turn the projector on On the projector On the remote control _P. 25 16 - Sharp PG-F200X | Operation Manual - Page 21
) and picture size, press ENTER to finish the Setup Guide. _PP. 26, 27 5. Correct trapezoidal distortion Correcting trapezoidal distortion using Keystone Correction. On the projector Shrinks upper side. Shrinks lower side. On the remote control _P. 28 6. Select the INPUT mode Select the - Sharp PG-F200X | Operation Manual - Page 22
mount Setup ■ It is recommended that you use the optional Sharp ceiling-mount adaptor and unit for this installation. Before mounting the projector, contact your nearest Sharp Authorized Projector Dealer or Service Center to obtain the recommended ceiling-mount adaptor and unit (sold separately). 18 - Sharp PG-F200X | Operation Manual - Page 23
(PRJ) Mode The projector can use any of the 4 projection modes shown in the diagram below. Select the mode most appropriate for the projection setting in use. (You can set the PRJ mode in "SCR-ADJ" menu. See page 42.) ■ Table mounted, front projection [Menu item ➞ "Front"] ■ Ceiling mounted, front - Sharp PG-F200X | Operation Manual - Page 24
Setting up the Projector (Continued) Screen Size and Projection Distance NORMAL Mode (4:3) Picture (Screen) size Diag. [χ] Width Height Projection distance [L] Minimum [L1] Maximum [L2] 300Љ (762 cm) 610 cm ( - Sharp PG-F200X | Operation Manual - Page 25
Chart" for a list of computer signals compatible with the projector. Use with computer signals other than those listed may cause some keys simultaneously when using a SHARP notebook computer). Refer to the specific instructions in your computer's operation manual to enable your computer's - Sharp PG-F200X | Operation Manual - Page 26
provided by the video equipment manufacturer. • When you connect video equipment with a 21-pin RGB output (Euro-scart) to the projector, use a commercially available cable that fits in the projector terminal you want to connect. • The projector does not support RGBC signals via the Euro-scart. 22 - Sharp PG-F200X | Operation Manual - Page 27
Cable ø3.5 mm ø3.5 mm stereo or mono audio cable audio output (commercially available or available terminal as Sharp service part QCNWGA038WJPZ) Terminal on the projector AUDIO 1 Monitor Amplifier RCA audio output terminal RCA audio cable (commercially available) AUDIO 2 Audio output terminal - Sharp PG-F200X | Operation Manual - Page 28
if your computer terminal is not correctly set up. Refer to the operation manual of the computer for details. • See pages 53 and 54 for connection the RS-232C terminal on the computer. This may damage your computer or projector. • Do not connect or disconnect an RS-232C serial control cable to - Sharp PG-F200X | Operation Manual - Page 29
operations written below. (See pages 21 to 24.) Remove the lens cap and press STANDBY/ON on the projector or ON on the remote control. • The power indicator illuminates green. • After the lamp indicator illuminates, the projec- tor is ready to start operation. Info • When "Auto Restart" is set to - Sharp PG-F200X | Operation Manual - Page 30
Image Projection Setup Guide screen About the Setup Guide After turning on the projector, the Setup Guide screen appears to assist you with projector setup. Guidance items 1 FOCUS 2 HEIGHT ADJUST 3 ZOOM Press ENTER to exit the Setup Guide screen. Note • The Setup Guide screen automatically high- - Sharp PG-F200X | Operation Manual - Page 31
can be adjusted using the adjustment feet at the front and rear of the projector. When the screen is above the projector, the projection image can be made higher by adjusting the projector. 1 Lift the projector to adjust its height while lifting the HEIGHT ADJUST lever. 2 Remove your hands from - Sharp PG-F200X | Operation Manual - Page 32
1 Press KEYSTONE to enter the Keystone Correction mode. • You can also display the on-screen display of the Keystone Correction mode with KEYSTONE on the projector. 2 Press P/Q or O/R to adjust the Keystone Correction. • You can also adjust the Keystone Correction using the adjustment buttons on the - Sharp PG-F200X | Operation Manual - Page 33
the INPUT mode. COMPUTER, DVI, S-VIDEO, VIDEO buttons AV MUTE button VOL +/- (Volume) buttons Adjusting the Volume Press VOL +/- on the remote control or -O/Q+ on the projector to adjust the volume. Note • Pressing VOL-/-O will lower the volume. • Pressing VOL+/Q+ will raise the volume. • When the - Sharp PG-F200X | Operation Manual - Page 34
Image Projection (Continued) Resize Mode This function allows you to modify or customize the resize mode to enhance the input image. Depending on the input signal, you can choose "NORMAL", "BORDER" or "STRETCH" image. Press RESIZE. • See page 41 for setting on menu screen. RESIZE button - Sharp PG-F200X | Operation Manual - Page 35
VIDEO/DTV • "STRETCH" is fixed when 540P, 720P, 1035I or 1080I signals are entered. Input Signal Video/DTV Image type NORMAL * Output screen image BORDER * STRETCH 4:3 aspect ratio * * 480I, 480P, 576I, Letter box 576P, NTSC, PAL, SECAM * Squeezed 16:9 image * Squeezed 4:3 image * 16 - Sharp PG-F200X | Operation Manual - Page 36
ECO+QUIET on the remote control or on the projector to switch the Eco+ lamp life will extend. Canceling the break timer display function Press BREAK TIMER. Note • Break Timer does not function while the pro- jector is operating the "Auto Sync", "FREEZE" or "AV MUTE" functions. Note • Refer to "Lamp - Sharp PG-F200X | Operation Manual - Page 37
only when RGB signal is input. Auto Sync (Auto Sync Adjustment) Auto Sync function works when detecting input signal after the projector turns on. Press AUTO SYNC to manually adjust with Auto Sync function. Note • When the optimum image cannot be achieved with Auto Sync adjustment, use the help - Sharp PG-F200X | Operation Manual - Page 38
projector with the remote control. For details, see the operation manual of the receiver. Connecting with a USB cable Computer To USB terminal Remote receiver To USB terminal (optional, AN-MR2) or USB cable (commercially available or available as Sharp service part that do not support USB. • - Sharp PG-F200X | Operation Manual - Page 39
Bright Color Tint Sharp CLR Temp Bright Boost Progressive Lamp Setting Reset PRJ - ADJ Help Standard 0 0 0 0 0 0 1 3D Progressive Bright Sharp -30 + Setup Guide [On/Off] Page 42 PRJ Mode Page 42 Language Page 42 Sub menu Normal Border Stretch Logo Blue None Front Ceiling + Front Rear Ceiling + - Sharp PG-F200X | Operation Manual - Page 40
Projector adjustment (PRJ-ADJ)" menu Picture SCR - ADJ Auto Power Off Auto Restart STANDBY Mode System Sound Speaker Audio Input RS-232C Fan Mode System Lock PRJ - ADJ On On Standard On On Audio 1 9600bps Normal Disable Help Lamp The image is distorted Reset all adjustments to default - Sharp PG-F200X | Operation Manual - Page 41
Adjusting "Bright". • This operation can also be performed by using the buttons on the projector. 1 Press MENU/HELP. • The "Picture" menu screen for the selected input Bright Red Blue CLR Temp Bright Boost Lamp Setting Reset PRJ - ADJ Standard 0 0 0 0 0 1 Bright Help SEL./ADJ. ENTER END 37 - Sharp PG-F200X | Operation Manual - Page 42
SCR - ADJ Picture Mode Contrast Bright Red Blue CLR Temp Bright Boost Lamp Setting Reset PRJ - ADJ Standard 0 0 0 0 0 1 Bright Help SEL./ - ADJ PRJ - ADJ Picture Mode Contrast Bright Red Blue CLR Temp Bright Boost Lamp Setting Reset Standard 0 15 0 0 0 1 Bright Help 5 Press MENU/HELP. • The - Sharp PG-F200X | Operation Manual - Page 43
input Picture SCR - ADJ Picture Mode Contrast Bright Color Tint Sharp CLR Temp Bright Boost Progressive Lamp Setting Reset PRJ - ADJ Help Standard 0 0 0 0 0 0 retained in memory. Note • You can also press PICTURE MODE on the remote control to select the picture mode. (See page 33.) • *sRGB is - Sharp PG-F200X | Operation Manual - Page 44
skin tones purplish. For less sharpness. For high fidelity color reproduction. selected. • To reset all adjustment items, select "Reset" and press ENTER is at 24 frames/second. The projector can convert this film source to as shown in the chart.) The lamp life cooler, bluish, fluorescent-like images - Sharp PG-F200X | Operation Manual - Page 45
Help 1 Resize 2 Image Shift 3 Keystone 4 OSD Display 5 Background 6 Setup Guide 7 PRJ Mode 8 Language Border 0 0 On Logo On Front English Menu operation to "Normal"). • You can also press KEYSTONE on the remote control or on the projector to adjust Keystone Correction. Note • You cannot set this - Sharp PG-F200X | Operation Manual - Page 46
displayed. Selectable items Front Ceiling + Front Rear Ceiling + Rear Description Normal image Sharp logo screen Blue screen - 6 Selecting the Setup Guide Selectable items On Off Description Displaying the Setup Guide when turning the projector on. Not displaying the Setup Guide. The projector - Sharp PG-F200X | Operation Manual - Page 47
Adjusting the Projector Function ("PRJ - ADJ" Menu) Picture SCR - ADJ Auto Power Off Auto Restart STANDBY Mode System Sound Speaker Audio Input RS-232C Fan Mode System Lock PRJ - ADJ On On Standard On On Audio 1 9600 bps Normal Disable Help Lamp Timer(Life) 0h 0 min 100% SEL./ADJ. ENTER - Sharp PG-F200X | Operation Manual - Page 48
keycode in a safe place where only authorized users have access. Info • If you lose or forget your keycode, contact your nearest Sharp Authorized Projector Dealer or Service Center (see page 63). Even if the product warranty is valid, the keycode reset will incur a charge. a Setting/Changing the - Sharp PG-F200X | Operation Manual - Page 49
• MENU/HELP • System lock function recognizes each button on the remote control or on the projector as an individual button, even if they share the same button on the projector simultaneously for about 5 seconds. Info • Keylock cannot be set while the projector is: displaying the "Setup Guide" or - Sharp PG-F200X | Operation Manual - Page 50
or poor Picture is dark The image is distorted Help Reset all adjustments to default settings SEL. ENTER END Press ENTER on the input signal or setting that you have selected. • If the problem is not solved, refer to "Troubleshooting". (see pages 61 and 62) • When selecting "sRGB" in "Picture - Sharp PG-F200X | Operation Manual - Page 51
diluted with water Wax Thinner Info • If you want to clean the air vents during projector operation, ensure you press STANDBY/ON on the projector or STANDBY on the remote control and put the projector into standby mode. After the cooling fan has stopped, clean the vents. Appendix Mild detergent - Sharp PG-F200X | Operation Manual - Page 52
and temperature warning indicator) on the projector indicate problems inside the projector. ■ If a problem occurs, either the temperature warning indicator or the lamp indicator will illuminate red, and the projector will enter standby mode. After the projector has entered standby mode, follow the - Sharp PG-F200X | Operation Manual - Page 53
page 63) for repair. • Disconnect the power cord from the AC outlet, and then connect it again. • Carefully replace the lamp. (See page 51.) • Take the projector to your nearest Sharp Authorized Projector Dealer or Service Center (see page 63) for repair. • Please exercise care when replacing the - Sharp PG-F200X | Operation Manual - Page 54
unit to fully cool before removing the lamp unit. ■ Carefully change the lamp by following the instructions described in this section. * If you wish, you may have the lamp replaced at your nearest Sharp Authorized Projector Dealer or Service Center. * If the new lamp does not light after replacement - Sharp PG-F200X | Operation Manual - Page 55
on the remote control to put the projector into standby mode. • Wait until the cooling fan stops. 2 Disconnect the power cord. • Unplug the power cord from the AC socket. • Leave the lamp until it has fully cooled down (about 1 hour). STANDBY/ON button AC socket User service screw (for lamp unit - Sharp PG-F200X | Operation Manual - Page 56
user service screw (3) to secure the lamp unit cover. Info • If the lamp unit and lamp unit cover are not correctly installed, the power will not turn on, even if the power cord is connected to the projector. Securing screws Resetting the Lamp Timer Reset the lamp timer after replacing the lamp - Sharp PG-F200X | Operation Manual - Page 57
Connecting Pin Assignments COMPUTER/COMPONENT input and COMPUTER/COMPONENT output Terminals:mini D-sub 15 pin female connector COMPUTER Input/Output Pin No. Signal 1. Video input (red) 11 15 2. Video input (green/sync on green) 3. Video input (blue) 4. Not connected 5. Not connected 6. - Sharp PG-F200X | Operation Manual - Page 58
CI Note • Depending on the controlling device used, it may be necessary to connect Pin 4 and Pin 6 on the controlling device (e.g. computer). Projector Pin No. 4 5 6 Computer Pin No. 4 5 6 USB Terminal: Type B USB connector 43 Pin No. 1. 2. 3. 4. Signal VCC USB- USB+ SG Name USB power USB - Sharp PG-F200X | Operation Manual - Page 59
projector by connecting an RS-232C serial control cable (cross type, sold separately) to the projector projector projector Problem response (communication error or incorrect command) O K Return code (0DH) E R R Return code (0DH) Info • When controlling the projector projector projector reset projector - Sharp PG-F200X | Operation Manual - Page 60
Integer) T L T M _ _ _ 1 0, 15, 30, 45 T L T L _ _ _ 1 0% - 100%(Integer) T N A M _ _ _ 1 PGF200X M N R D _ _ _ 1 PG-F200X 0:Standby P J N 1 * * * * OK or ERR P J N 2 * * * * OK or ERR P J N 3 * * * * OK or ERR P J N 0 _ _ _ 1 Projector Name I R G B _ _ _ 1 OK or ERR ERR I R G B _ _ _ 2 OK or - Sharp PG-F200X | Operation Manual - Page 61
R B C O _ * * * OK or ERR Tint -30 - +30 R B T I _ * * * OK or ERR Sharp -30 - +30 R B S H _ * * * OK or ERR CLR Temp -2 - +2 R B C T _ _ * * OK or ERR Bright Boost 0 - +2 R B W E _ _ _ * OK or ERR Picture Reset R B R E _ _ _ 1 OK or ERR Signal Type Auto I B S I _ _ _ 0 OK or ERR RGB - Sharp PG-F200X | Operation Manual - Page 62
S-Video INPUT Picture Mode Video INPUT Contrast Bright Color Tint Sharp CLR Temp Bright Boost Progressive Picture Reset Audio Input Picture Mode Contrast Bright Color Tint Sharp CLR Temp Bright Boost Progressive Picture Reset Audio Input Clock -150 - +150 Phase -30 - +30 H-position -150 - Sharp PG-F200X | Operation Manual - Page 63
Français Italiano Svenska Português polski Türkçe Setup Guide On Off System Sound On Off Internal Speaker On Off RGB Frequency Horizontal Check Vertical Fan Mode Normal High Lamp Timer Reset *3 COMMAND PARAMETER Power ON A P O W _ _ _ 1 OK or ERR A P O W _ _ _ 0 OK - Sharp PG-F200X | Operation Manual - Page 64
signal: Compatible with TTL level • Compatible with sync on green signal The following is a list of modes that conform to VESA. However, this projector supports other signals that are not VESA standards. PC/MAC Resolution Horizontal Frequency Vertical Frequency VESA Standard DVI-D (kHz) (Hz - Sharp PG-F200X | Operation Manual - Page 65
Troubleshooting Problem No picture and no sound or projector does not start. Sound is heard but no picture appears (or picture is dark). Check • Projector the projector. • Remote control battery has run out. • External output has not been set when connecting notebook computer. • The lamp unit - Sharp PG-F200X | Operation Manual - Page 66
be used. • Operate the remote control while pointing it at the projector's remote control sensor. • The remote control may be too far away from the projector. • If direct sunlight or a strong fluorescent lamp is shining on the projector's remote control sensor, place the projector where it will not - Sharp PG-F200X | Operation Manual - Page 67
If you encounter any problems during setup or operation of this projector, first refer to the "Troubleshooting" section on pages 61 and 62. If this operation manual does not answer your question, please contact the SHARP Service departments listed below. U.S.A. Sharp Electronics Corporation 1-888 - Sharp PG-F200X | Operation Manual - Page 68
lamp Rated voltage Rated frequency Input current Power consumption (Standby) Operation temperature Cabinet Dimensions (main body only) Weight (approx.) PG-F200X 0.55" DLP® Chip XGA (1024 × 768) F 2.5 - 2.6 Manual kg) As a part of policy of continuous improvement, SHARP reserves the right to - Sharp PG-F200X | Operation Manual - Page 69
Dimensions Units: inches (mm) 1/4 (6) 10 7/16 (265) 1 31/64 2 5/8 (66.35) (37.65) 3 33/64 (89) 2 61/64 (75) 10 41/64 (270) 2 3/8 (60) M4 M4 M4 M4 13/32 (10) 13/32 (10) 2 61/64 (75) 1 27/64 (36) 1 3/16 (30) 1 15/16 (49) 4 7/64 (104) 65 Appendix - Sharp PG-F200X | Operation Manual - Page 70
control 13 Remote control sensor 15 Replacing the lamp 50, 51 Resize 30, 41 RESIZE button 30 RGB cable 21 RS-232C terminal 24 SCR - ADJ 41 Screen Size and Projection Distance 20 Setup Guide 26, 42 Sharp 40 Speaker 43 SPOT button 32 STANDBY button 25 STANDBY Mode 43 STANDBY/ON button - Sharp PG-F200X | Operation Manual - Page 71
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
 |
 |
DATA PROJECTOR
MODEL
PG-F200X
OPERATION MANUAL
Introduction
Quick Start
Setup
Connections
Basic
Operation
Useful
Features
Appendix