Sharp PG-LX3500 Operation Manual
Sharp PG-LX3500 Manual
 |
View all Sharp PG-LX3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp PG-LX3500 manual content summary:
- Sharp PG-LX3500 | Operation Manual - Page 1
DATA PROJECTOR MODEL PG-LX3000 PG-LX3500 PG-LW3000 PG-LW3500 OPERATION MANUAL Introduction Easy Start Setup Connections Basic Operation Useful Features Appendix - Sharp PG-LX3500 | Operation Manual - Page 2
the loss or theft of your Projector, please record the Model and Serial Number located on the bottom of the projector and retain this information. • occur. To fit an appropriate plug to the mains lead, follow the instructions below: WARNING: THIS APPARATUS MUST BE EARTHED. IMPORTANT: The wires in - Sharp PG-LX3500 | Operation Manual - Page 3
manual carefully. Introduction ENGLISH There are two important reasons for prompt warranty registration of your new SHARP Projector, using the REGISTRATION CARD packed with the projector. 1. WARRANTY This is to assure that you immediately receive the full benefit of the parts, service - Sharp PG-LX3500 | Operation Manual - Page 4
with the operation manual, may cause projector. In such a case, it is recommended you contact your nearest Sharp Authorized Projector Dealer or Service instructions described on pages 63 to 65. * If you wish, you may have the lamp replaced at your nearest Sharp Authorized Projector Dealer or Service - Sharp PG-LX3500 | Operation Manual - Page 5
cords are supplied along with your projector depends on the region. Use the power cord that corresponds to the wall outlet in your country. • Initial setup guide • CD-ROM depending on the region. Please check with your nearest Sharp Authorized Projector Dealer or Service Center. 3 - Sharp PG-LX3500 | Operation Manual - Page 6
Setup and Projection 14 Setup Setting Up the Projector 16 Video Setup 16 Setting Up the Projector 16 Standard Setup (Front Projection 16 Screen Size and Projection Distance (PG-LW3500/PG-LW3000).... 17 Screen Size and Projection Distance (PG-LX3500/PG-LX3000)...... 18 Projection (PRJ) Mode 19 - Sharp PG-LX3500 | Operation Manual - Page 7
Default Settings 53 Checking the Lamp Life Status 53 Setting Up the Projector Network Environment ("Network"Menu 54 Setting a Password 54 DHCP Client Setting Chart 66 Troubleshooting 68 For SHARP Assistance 71 Specifications 72 Dimensions 73 Index 74 • In this operation manual, the - Sharp PG-LX3500 | Operation Manual - Page 8
servicing. 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions The safety and operating instructions in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer - Sharp PG-LX3500 | Operation Manual - Page 9
spill liquid of any kind on the product. 17. Servicing Do not attempt to service this product yourself as opening or removing covers may expose normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as an improper adjustment - Sharp PG-LX3500 | Operation Manual - Page 10
Observe the following safeguards when setting up your projector. Caution concerning the lamp unit ■■ Potential hazard of glass particles if lamp ruptures. In case of lamp rupture, contact your nearest Sharp Authorized Projector Dealer or Service Center for replacement. See "Regarding the Lamp" on - Sharp PG-LX3500 | Operation Manual - Page 11
the AC outlet and turning off the equipment to be connected. ■■ Please read the operation manuals of the projector and the equipment to be connected for instructions on how to make the connections. Using the projector in other countries ■■ The power supply voltage and the shape of the plug may vary - Sharp PG-LX3500 | Operation Manual - Page 12
in this operation manual where the topic is explained. 1 11 2 3 12 8 4 5 9 13 6 7 10 14 15 16 17 Top View 1 Temperature warning indicator 61 2 Lamp indicator 61 3 Power indicator 61 4 STANDBY/ON button 25 For turning the power on and putting the projector into Standby mode - Sharp PG-LX3500 | Operation Manual - Page 13
Terminal for controlling the projector using a computer via network. 9 RS-232C terminal 23 Terminal for controlling the projector using a computer. 10 Connect the supplied power cord. Using the Kensington Lock • This projector has a Kensington Security Standard connector for use with a Kensington - Sharp PG-LX3500 | Operation Manual - Page 14
in Z refer to the main pages in this operation manual where the topic is explained. 1 2 13 3 14 4 15 5 16 6 17 7 8 18 9 10 19 11 20 21 12 22 1 ON button 25 For turning the power on. 2 STANDBY button 25 For putting the projector into the Standby mode. 3 MAGNIFY buttons 35 For - Sharp PG-LX3500 | Operation Manual - Page 15
and then remove them using a cloth. • The batteries included with this projector may run down in a short period, depending on how they are kept. remote control may malfunction under a fluorescent lamp. In this case, move the projector away from the fluorescent lamp. 30° 30° 33 n ( - Sharp PG-LX3500 | Operation Manual - Page 16
the computer). For details, see the page described below for each step. Setup and Projection In this section, connection of the projector and the computer is explained using one example. 3 STANDBY/ON 8 button 8 STANDBY button 3 ON button 6 O/Q buttons 6 INPUT buttons 6 INPUT buttons 4 Zoom - Sharp PG-LX3500 | Operation Manual - Page 17
4. Adjust the projected image with the Setup Guide 1 After the projector turns on, the Setup Guide appears. (When "Setup Guide" is set to "On". See page 49.) 2 Follow the steps in the Setup Guide and adjust the focus, height (angle) and picture size. 3 After adjusting the focus, height (angle) - Sharp PG-LX3500 | Operation Manual - Page 18
page 28.) Standard Setup (Front Projection) ■■ Place the projector at the required distance from the screen according to the desired 31m.13")-m13-'242".10'(61m.07)"-m26-3'248'(".1900"-m.03)9m'6-" 12.0 m) [PG-LX3000/PG-LX3500] Example: 4:3 Signal Input (Normal Mode) Picture Size 300" (762 cm) 200 - Sharp PG-LX3500 | Operation Manual - Page 19
margin of error in the values in the diagrams below. [PG-LW3000/PG-LW3500] 16:10 Signal Input (Normal Mode) Picture (Screen) 1.5 m (4' 11") 1.8 m (6' 0") 1 cm (0 25/64") When using the projector with screen sizes not listed in the above charts, calculate the values according to the formulas. - Sharp PG-LX3500 | Operation Manual - Page 20
a margin of error in the values in the diagrams below. [PG-LX3000/PG-LX3500] 4:3 Signal Input (Normal Mode) Picture (Screen) size Diag. 32") ±12 cm (±4 29/32") ±8 cm (±3 17/64") When using the projector with screen sizes not listed in the above charts, calculate the values according to the - Sharp PG-LX3500 | Operation Manual - Page 21
Rear"] a Ceiling-Mount Setup It is recommended that you use the optional Sharp ceiling-mount adaptor and unit for this installation. Before mounting the projector, contact your nearest Sharp Authorized Projector Dealer or Service Center to obtain the recommended ceiling-mount adaptor and unit (sold - Sharp PG-LX3500 | Operation Manual - Page 22
. (The HDMI specification does not support all connections to equipment that has for a list of computer signals compatible with the projector. Use with computer signals other than those listed SHARP notebook computer). Refer to the specific instructions in your computer's operation manual to - Sharp PG-LX3500 | Operation Manual - Page 23
audio output (commercially available or available terminal as Sharp service part QCNWGA038WJPZ) AUDIO 1 RCA audio output terminal scart) to the projector, use a commercially available cable that fits in the projector terminal you want to connect. • The projector does not support RGBC signals via - Sharp PG-LX3500 | Operation Manual - Page 24
or mono audio cable (commercially available or available as Sharp service part QCNWGA038WJPZ) AUDIO OUT RCA audio input terminal the monitor. This projector is able to process the following signals when connected to HDMI equipment: • Video signal: For details, see "Digital Support" in the list - Sharp PG-LX3500 | Operation Manual - Page 25
an RS-232C serial control cable (cross type, commercially available), the computer can be used to control the projector and check the status of the projector. Refer to the "SETUP MANUAL" contained on the supplied CD-ROM for "RS-232C Specifications and Commands". When connecting to a computer using - Sharp PG-LX3500 | Operation Manual - Page 26
-over Category 5 (CAT.5) type cable (commercially available). Connecting the Power Cord Plug the supplied power cord into the AC socket on the rear of the projector. Then plug into AC outlet. Power cord (supplied) AC socket To AC outlet 24 - Sharp PG-LX3500 | Operation Manual - Page 27
. Blinking in green: The lamp is warming up. Red: The lamp is shut down abnormally or the lamp should be replaced. • When switching on the projector, a slight flickering of the image may be experienced within the first minute after the lamp has been illuminated. This is normal operation as the lamp - Sharp PG-LX3500 | Operation Manual - Page 28
Image Projection About the Setup Guide After turning on the projector, the Setup Guide screen appears to assist you with projector setup. Guidance items 1 FOCUS 2 HEIGHT ADJUST 3 ZOOM Press ENTER to exit the Setup Guide screen. Note • The Setup Guide screen automatically highlights the items - Sharp PG-LX3500 | Operation Manual - Page 29
lever 2 Remove your hands from the HEIGHT ADJUST lever of the projector after its height has been finely adjusted. • The angle of projection the Picture Size You can adjust the picture size using the zoom ring on the projector. Rotate the zoom ring to enlarge or shrink the picture size. • Using - Sharp PG-LX3500 | Operation Manual - Page 30
Image Projection (Continued) Correcting Trapezoidal Distortion When the image is projected either from the top or from the bottom towards the screen at an angle, the image becomes distorted trapezoidally. The function for correcting trapezoidal distortion is called Keystone Correction. Adjustment - Sharp PG-LX3500 | Operation Manual - Page 31
). VOL +/- (Volume) buttons INPUT buttons AV MUTE button O/Q buttons Adjusting the Volume Press VOL +/- on the remote control or -O/Q+ on the projector to adjust the volume. Note • Pressing VOL-/-O will lower the volume. • Pressing VOL+/Q+ will raise the volume. On-screen display Basic Operation - Sharp PG-LX3500 | Operation Manual - Page 32
, you can choose a desired image. Press RESIZE. • See page 47 for setting on menu screen. COMPUTER [PG-LW3000/PG-LW3500] 4:3 aspect ratio Other aspect ratios SVGA (800 × 600) XGA (1024 × 768) SXGA (1152 × images. *2 Same as NORMAL mode. *3 In case SXGA+ input. 30 *1 *1 -*2 -*2 -*2 -*2 *1 *1 - Sharp PG-LX3500 | Operation Manual - Page 33
VIDEO/DTV [PG-LW3000/PG-LW3500] Input signal Video/DTV Image type NORMAL Output screen image AREA ZOOM V-STRETCH 16:9 *1 4:3 aspect ratio 480I, 480P, *1 576I, 576P, NTSC, PAL, SECAM Squeeze *1 - Sharp PG-LX3500 | Operation Manual - Page 34
image. Depending on the input signal, you can choose a desired image. Press RESIZE. • See page 47 for setting on menu screen. COMPUTER [PG-LX3000/PG-LX3500] RESIZE button 4:3 aspect ratio Other aspect ratios Main resolution SVGA (800 × 600) XGA (1024 × 768) SXGA (1152 × 864) UXGA (1600 × 1200 - Sharp PG-LX3500 | Operation Manual - Page 35
VIDEO/DTV [PG-LX3000/PG-LX3500] Input signal Video/DTV Image type NORMAL For 4:3 screen For 16:9 screen AREA ZOOM V-STRETCH BORDER 16:9 1 1 480I, 480P, 576I, 576P, NTSC, PAL, SECAM 4:3 aspect - Sharp PG-LX3500 | Operation Manual - Page 36
minute (up to 60 minutes). Canceling the break timer display function Press BREAK TIMER. Note • The Break Timer is not available while the projector is operating the following functions. - Auto Sync - Freeze - AV Mute - Input Search 2 Press SPOT again. • The spot area will disappear. Switching the - Sharp PG-LX3500 | Operation Manual - Page 37
function works when detecting input signal after the projector turns on. Press AUTO SYNC to manually adjust with Auto Sync function. Note • When selectable magnifications differ depending on the input signal. • In the following cases, the image will return to the normal size (×1). - When switching - Sharp PG-LX3500 | Operation Manual - Page 38
in the projector. "Quick Native Area Zoom V-Stretch Border (PG-LX3000/LX3500) 16:9 English Deutsch Español Nederlands Français Italiano Svenska Português polski Magyar Türkçe Tiếng Việt Contrast -30 +30 Bright -30 +30 Color -30 +30 Tint -30 +30 Sharp - Sharp PG-LX3500 | Operation Manual - Page 39
47 Sub menu Normal Full Native Area Zoom V-Stretch Border (PG-LX3000/LX3500) 16:9 Keystone -80 +80 Page 47 Overscan [On/Off] Page 48 OSD Display [On/Off] Page 48 Closed Caption Page 48 Background Page 49 Setup Guide [On/Off] Page 49 PRJ Mode Page 49 Wall Color Page 49 Language Page - Sharp PG-LX3500 | Operation Manual - Page 40
Menu Items (Continued) "Projector adjustment (PRJ-ADJ1/2)" menu Main menu PRJ-ADJ1 Page 50 Auto Sync [On/Off] Page 50 Auto Power Off [On/Off] Page Page 55 TCP/IP Page 55 Reset Network Setting Page 55 Restart Network Page 55 IP Address Page 56 MAC Address Page 56 Projector Page 56 Link Page 56 38 - Sharp PG-LX3500 | Operation Manual - Page 41
screen when the menu is displayed. Menu Selections (Quick Start Menu) • This operation can also be performed by using the buttons on the projector. 1 Press MENU. • The "Quick Start Menu" screen for the selected Input mode is displayed. 2 Press P or R to select the desired item, then press - Sharp PG-LX3500 | Operation Manual - Page 42
an operation button during input searching cancels the search. Manually change the resolution. Use this function when the image and "Bright". • This operation can also be performed by using the buttons on the projector. 1 Press MENU. • The "Quick Start Menu" screen is displayed. Example: - Sharp PG-LX3500 | Operation Manual - Page 43
Eco+Quiet Reset SEL./ADJ. SCR PRJ1 PRJ2 Standard 0 15 0 0 0 1 On Level 2 Off Single ADJ END Note • The MENU button is not available while the projector is operating: - Auto Sync/Break Timer/Freeze/AV Mute/Input Search Useful Features 41 - Sharp PG-LX3500 | Operation Manual - Page 44
For standard image Presentation Brightens portions of image for more enhanced presentations. Movie Gives natural tint to the projected image. Game Gives sharpness to the projected image. *sRGB For high fidelity reproduction of images from a computer. The default settings of each item when - Sharp PG-LX3500 | Operation Manual - Page 45
making the effect weaker. Q button For more contrast. For more brightness. For more color intensity. For making skin tones greenish. For more sharpness. For stronger red. For stronger blue. For making the effect stronger. *1 Not displayed in the RGB input mode. *2 Not adjustable/selectable when - Sharp PG-LX3500 | Operation Manual - Page 46
are not detected. Note • This function is available for the following signals. With COMPUTER/COMPONENT input: - 480I - 576I - 1035I (PG-LW3000/LW3500 only) - 1080I (PG-LW3000/LW3500 only) With VIDEO input: - All signals 7 Eco+Quiet Selectable items On Off Brightness and Power consumption Approx - Sharp PG-LX3500 | Operation Manual - Page 47
. 4 Selecting the Dynamic Range An optimum picture may not be displayed if an HDMI-capable device's output signal type and the projector's input signal type do not match. If this should occur, switch "Dynamic Range". Selectable items Auto Standard Enhanced Description In most circumstances - Sharp PG-LX3500 | Operation Manual - Page 48
preset to "Auto"; however, a clear picture from the connected audio-visual equipment may not be received, depending on the Video signal difference. In that case, switch the Video signal. Selectable items Auto PAL SECAM *NTSC4.43 NTSC3.58 PAL-M PAL-N PAL-60 * When reproducing NTSC signals in PAL - Sharp PG-LX3500 | Operation Manual - Page 49
the Projected Image ("SCR-ADJ" Menu) Pict. SIG SCR-ADJ PRJ1 PRJ2 1 Resize 2 Image Shift 3 Keystone 4 Overscan 5 OSD Display 6 Closed Caption 7 Background 8 Setup Guide 9 PRJ Mode 0 Wall Color Language Normal 0 0 On On Off Logo On Front Off English SEL./ADJ. ENTER END Menu operation n Page 40 - Sharp PG-LX3500 | Operation Manual - Page 50
Resize mode is set to "Border". • This function is available in the following cases only: Resize mode Normal Area Zoom V-Stretch 16:9 Keystone Correction -40 − + poor or if there are problems at the broadcast source. This does not necessarily indicate a problem with the projector. • If any button - Sharp PG-LX3500 | Operation Manual - Page 51
Image Selectable items Description Logo Sharp logo screen Blue Blue screen None - 8 Selecting the Setup Guide Selectable items Description On Displaying the Setup Guide when turning the projector on. Off Not displaying the Setup Guide. 9 Reversing/Inverting Projected Images - Sharp PG-LX3500 | Operation Manual - Page 52
may take some time to complete, depending on the image of the computer connected to the projector. • When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjustments. (See page 45.) 2 Auto Power Off Function Selectable items Description On When no input signal - Sharp PG-LX3500 | Operation Manual - Page 53
keycode in a safe place where only authorized users have access. Info • If you lose or forget your keycode, contact your nearest Sharp Authorized Projector Dealer or Service Center (see page 71). Even if the product warranty is valid, the keycode reset will incur a charge. aSetting/Changing the - Sharp PG-LX3500 | Operation Manual - Page 54
are locked. Info • Even when Keylock function is set to "On", STANDBY/ON on the projector can be used to turn on and off the power. • Keylock cannot be set while the projector is: displaying the "Setup Guide" or "Menu" screens, in Standby mode, warming up, changing input signals, operating the Auto - Sharp PG-LX3500 | Operation Manual - Page 55
Out" is set to "Off" automatically and you cannot change the setting. • The HDMI audio will not output from the AUDIO OUTPUT terminal when the projector is in Standby mode. Menu operation n Page 40 DLP® LinkTM See "Using 3D Viewing Mode" on page 59 for details. DLP® LinkTM Invert See "Using - Sharp PG-LX3500 | Operation Manual - Page 56
forget the password, perform the following procedure to delete it, then set a new password. On the projector, press . Note • If ENTER is held down for more than 5 seconds, the operation buttons on the projector will be locked. (See page 50.) • You cannot use the buttons on the remote control to - Sharp PG-LX3500 | Operation Manual - Page 57
obtain IP Address." appears. In this case, set the TCP/IP manually. (See the item 3.) 3 TCP/IP Setting Set the TCP/IP manually. 1 Select "Off" for "DHCP of "192.168.150.XXX", you don't have to change the projector IP address. • For details about each setting, consult your network administrator - Sharp PG-LX3500 | Operation Manual - Page 58
of the projector is displayed. Projector The projector name is displayed. Link Displays the network connection status. Connected Connected to the network. Disconnected Disconnected from the network. Note • For information on how to change the projector name, see "SETUP MANUAL" contained in - Sharp PG-LX3500 | Operation Manual - Page 59
are recommended to minimize the potential for experiencing visual problems or any adverse symptoms. ■■ Take regular breaks, at using "DLP® Link™ Invert", see the section on its operation in this operation manual.) ■■ The following people should limit stereoscopic 3D viewing: - Children under 6 - Sharp PG-LX3500 | Operation Manual - Page 60
the field sequential format - For details on the supported signals, see the Compatibility Chart in this operation manual. 2) 3D LCD shutter glasses that support the DLP® Link™* system - Contact your nearest Sharp Authorized Projector Dealer for purchasing details. * DLP® Link™ is a trademark of - Sharp PG-LX3500 | Operation Manual - Page 61
• Set the 3D-video playback equipment so that it outputs one of the signals listed in the Compatibility Chart in this operation manual. 3 Switch the Input mode of the projector to enable input of 3D video signals. 4 Operate the 3D-video playback equipment and play back the 3D content. 5 Turn the 3D - Sharp PG-LX3500 | Operation Manual - Page 62
for long periods. The effects of some of the agents in the plastic may cause damage to the quality or finish of the projector. ■■ Wipe off dirt gently with a soft flannel cloth. Using a chemical cloth (wet/dry sheet type cloth, etc.) may deform the components of the cabinet or - Sharp PG-LX3500 | Operation Manual - Page 63
and temperature warning indicator) on the projector indicate problems inside the projector. ■■ If a problem occurs, either the temperature warning indicator or the lamp indicator will illuminate red, and the projector will enter Standby mode. After the projector has entered Standby mode, follow the - Sharp PG-LX3500 | Operation Manual - Page 64
Problem Cause Possible Solution Temperature Off Red blinks The internal • Temperatures • Use the projector in an warning (On)/ temperature is around the projector the projector to your nearest Sharp Authorized Projector Dealer or Service Center be lit. In this case, unplug the power cord - Sharp PG-LX3500 | Operation Manual - Page 65
inside of the projector. In such a case, it is recommended you contact your nearest Sharp Authorized Projector Dealer or Service Center to assure the instructions described in this section. * If you wish, you may have the lamp replaced at your nearest Sharp Authorized Projector Dealer or Service - Sharp PG-LX3500 | Operation Manual - Page 66
on the remote control to put the projector into Standby mode. 2 Disconnect the power cord. • Unplug the power cord from the AC socket. • Leave the lamp until it has fully cooled down (about 1 hour). 3 Remove the lamp unit cover. • Loosen the user service screw (1) that secures the lamp unit cover - Sharp PG-LX3500 | Operation Manual - Page 67
unit cover horizontally back into place and align the tabs (1). Then tighten the user service screw (2) to secure the lamp unit cover. Info • If the lamp unit not turn on, even if the power cord is connected to the projector. Resetting the Lamp Timer Reset the lamp timer after replacing the lamp. - Sharp PG-LX3500 | Operation Manual - Page 68
70 75 60 75 60 75 60 60 60 60 67 75 75 75 Analog Support 4 ✔ Digital Support ✔ ✔ ✔ Display PG-LW3000/PG-LW3500 PG-LX3500/PG-LX3000 ✔ ✔ ✔ Upscale ✔ Upscale ✔ ✔ ✔ TRUE ✔ ✔ ✔ TRUE ✔ ✔ Intelligent Compression ✔ Intelligent Compression ✔ ✔ ✔ ✔ Upscale Intelligent Compression - Sharp PG-LX3500 | Operation Manual - Page 69
*2 800 × 600 1024 × 768 1280 × 720 1280 × 800 *1 Reduced Blanking *2 PG-LW3500/PG-LW3000 only Horizontal Frequency (kHz) 77.1 98.6 92.6 101.6 Vertical Frequency (Hz) 120 120 120 120 *1 Analog Support 4 4 4 4 Digital Support 4 4 4 4 Note • Your computer graphics card must be able to display 3D - Sharp PG-LX3500 | Operation Manual - Page 70
Troubleshooting Problem Check Page • Projector power cord is not plugged into the wall outlet. 22 • Power to the external connected devices is off. - • The selected Input mode is wrong. 29 • The AV Mute function is working. 29 • Cables are incorrectly connected to the projector manual of - Sharp PG-LX3500 | Operation Manual - Page 71
Problem Check Maintenance indicator on • See "Maintenance Indicators". the projector illuminates or blinks in red. Picture are incorrectly set. whitish. The cooling fan becomes • When temperature inside the projector increases, the cooling fan runs noisy. faster. The lamp does not light • - Sharp PG-LX3500 | Operation Manual - Page 72
Troubleshooting (Continued) Problem 3D viewing mode. See the operation manual of your 3D LCD shutter glasses. • Check the settings of the projector. - --Turn the DLP® Link projector. For details on the supported signals, see "3D Supported Signals" of the Compatibility Chart. • If the projector - Sharp PG-LX3500 | Operation Manual - Page 73
If you encounter any problems during setup or operation of this projector, first refer to the "Troubleshooting" section on pages 68 to 70. If this operation manual does not answer your question, please contact the SHARP Service departments listed below. U.S.A. Sharp Electronics Corporation 1-888 - Sharp PG-LX3500 | Operation Manual - Page 74
(approx.) PG-LW3500 PG-LW3000 PG-LX3500 PG-LX3000 0.65" DLP® Chip ×1 0.55" DLP® Chip ×1 WXGA (1280 × 800) XGA (1024 × 768) F 2.5 - 2.7 Manual, x 1.2 Manual f = SHARP projector uses a DLP® chip. This very sophisticated panel contains 1,024,000 (PG-LW3500/PG-LW3000)/786,432(PG-LX3500/PG- - Sharp PG-LX3500 | Operation Manual - Page 75
Dimensions Units: inches (mm) 9 21/32 (245) 4 1/16 (103) 4 3/64 (102.5) 12 3/32 (307) 1 7/8 (47.6) 3 45/64 (94) 5/8 (15.5) 13/64 (5) 3 5/32 (80) 1 23/32 (43.5) 1 1/4 (31.5) 2 5/32 1 61/64 (54.5) (49.5) 3 25/64 (86) M4 M4 M4 5 3/32 (129) 4 31/32 (126) • Screw hole specs: 75 mm × 104 mm • - Sharp PG-LX3500 | Operation Manual - Page 76
45 RETURN button 39 RGB cable 20 RS-232C terminal 23 SCR-ADJ 47 Screen Size and Projection Distance 17 Security bar 10 Setup Guide 26, 49 Sharp 43 SIG-ADJ 45 Signal Info 46 Signal Type 45 Speaker 50 SPOT button 34 STANDBY button 25 STANDBY Mode 53 STANDBY/ON button - Sharp PG-LX3500 | Operation Manual - Page 77
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
 |
 |
Introduction
Easy Start
Setup
Connections
Basic
Operation
Useful
Features
Appendix
OPERATION MANUAL
DATA PROJECTOR
MODEL
PG-LX3000
PG-LX3500
PG-LW3000
PG-LW3500