Sharp PN-455RUP PN-455 Operation Manual

Sharp PN-455RUP Manual

Get Sharp PN-455RUP PDF manuals and user guides View all Sharp PN-455RUP manuals
Add to My Manuals
Save this manual to your list of manuals

Sharp PN-455RUP manual content summary:

  • Sharp PN-455RUP | PN-455 Operation Manual - Page 1
    OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. 1E
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 2
    . This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 3
    safety and many years of trouble-free operation of your product service life of your LCD product, please read the following precautions carefully before using the product. 1. Read instructions - All operating instructions must be read and understood before the product is operated. 2. Keep this manual
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 4
    other danger. 17. Safety checks - Upon completion of service or repair work, request the service technician to perform safety checks to ensure that the to operate on batteries or another power source, refer to the operating instructions. WARNING: This is a class A product. In a domestic environment
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 5
    to fire as a result of overheating. - Do not remove or insert the power plug with wet hands. Doing so could result in electric shock. Manual Scope - In this manual, Microsoft Windows XP will be referred to as "Windows XP", and Microsoft Windows 2000 as "Windows 2000". When there is no need to
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 6
    PC Operation ...38 PC connection ...38 Communication conditions 39 Communication procedure 40 RS-232C command table 47 Troubleshooting and Specifications Troubleshooting ...52 Specifications ...54 Appendix PC Digital/Analog Signal Input Compatibility Chart 56 Connector Compatibility Charts 57
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 7
    ENGLISH Features ●HIGH-DEFINITION (HD) LCD PANEL • A large, flat LCD panel with 1920 x 1080 pixels lets you enjoy a detailed, high-definition picture. ● ASV*LOW-REFLECTION BLACK TFT LCD PANEL • SHARP's unique ASV* low-reflection BLACK TFT LCD panel provides higher luminance, higher contrast, and a
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 8
    - DISLAY MODE SIZE RRMCGRE1L0MC0O-44TM5EP0FPCZONTROL POWER MUTE BRIGHT + MENU INPUT ●Carrying handle mounting screw (4) / Spacer (4) ● Operation manual (1) ● Video connection cable (1) ● Component connection cable (1) (0PE1S8022411/) (0PEQCNW-1165M) • You are advised to retain the carton
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 9
    ENGLISH Part Names - Display Front view Liquid Crystal Display panel Remote control sensor (See page 12.) * When using the remote control, point it towards here. Input button (See page 25.) * Press with a sharp object such as a pen. Power button (See page 24.) * Press with a sharp object such as
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 10
    Part Names - Display (Continued) Rear view Main power switch VESA holes (M6, 15mm in depth x 6 holes) INPUT3 Y Pb Cb Component input Pr Cr terminal (See page 15.) AC input terminal (See page 19.) Audio output terminals (See page 17.) PC audio input terminal (See pages 13 and 14.)
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 11
    ENGLISH Part Names - Remote Control Unit Remote control unit Signal transmitter POWER button (See page 24.) MUTE button (See page 25.) VOL buttons (See page 25.) * You can use this button when the menu is not displayed. BRIGHT buttons (See page 25.) * You can use this button when the menu is not
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 12
    Part Names - Remote Control Unit (Continued) Removing the battery cover Gently hold down and press in the arrow direction. Cautions regarding remote control unit • Do not expose the remote control unit to shock. In addition, do not expose the remote control unit to liquids, and do not place it in
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 13
    ENGLISH Connecting Peripheral Equipment The various terminals on the LCD panel are described below. INPUT1 (PC DIGITAL) • Connect with the digital RGB output terminal on your computer using a digital signal cable (commercially available). * Connection with computers that have an output terminal (
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 14
    Connecting Peripheral Equipment (Continued) INPUT2 (PC ANALOG) • Connect with the display connector on your computer using a RGB cable (commercially available). • Connect with an audio output jack on your computer using a PC audio cable (commercially avail- able). ▼ Rear view Output terminals on
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 15
    ENGLISH INPUT3 (COMPONENT) • Connect with component output terminals using a component cable (commercially available). • Connect with an audio output terminal using an audio (RCA) cable (commercially available). ▼ Rear view Output terminals on connected equipment Component Audio - Right video
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 16
    Connecting Peripheral Equipment (Continued) INPUT4 (S-VIDEO/VIDEO) • Connect with equipment that has an S-video output terminal using an S-video cable (commercially available).* • Connect with equipment that has a video output terminal using a video (BNC) cable (commercially available).* • Connect
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 17
    ENGLISH ▼ Rear view Output terminals on connected equipment Audio - Right Audio - Left Video Composite video input terminal INPUT4 (VIDEO) Video connection cable (*2) Audio input terminals AUDIO IN R L (Red) (White) Video cable Audio cable (Red) (White) Compatible video signal NTSC (3.58
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 18
    Connecting External Speakers Be sure to use external speakers with an impedance of 6 ohms and a rated input of at least 10 W. ▼ Rear view Black Red Red SPEAKER R L External speaker terminals (right) External speaker terminals (left) Connecting the speaker cables 1. While pushing the tab,
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 19
    ENGLISH Connecting the AC Cord Be sure to turn the main power switch off when connecting the cord. Main power switch Turn off the main power switch on the top of the monitor. ▼ Rear view Plug (to the AC input terminal) Power outlet AC input terminal AC cord Plug (to power outlet)
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 20
    Connecting Multiple Monitors Multiple monitors can be connected in a daisy chain using the input/output terminals for video signals. Connection example ▼ First monitor ▼ Second monitor PC analog RGB input terminal PC analog RGB output terminal INPUT2 OUTPUT (RGB) (RGB) PC analog RGB input
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 21
    ENGLISH Connection example for RS-232C Monitors can be externally controlled using the RS-232C interface (COM port) of a PC, and, in this case too, multiple monitors can be connected in a daisy chain. By assigning each monitor an ID number (see page 46), you can perform input switching, adjustment
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 22
    Mounting the Temporary Stands Please note that the temporary stands are for temporary use only until the monitor is properly mounted. Attach each temporary stand to the bottom of the monitor as shown below. ▼ Rear view Screw Temporary stand Bundling Cables The AC cord can be fastened using the
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 23
    ENGLISH Attaching the Carrying Handles When carrying the monitor, attach the two carrying handles to the top of the monitor as shown below. ▼ Rear view Screw Spacer * After mounting the monitor, remove the carrying handles from the monitor. 23 E
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 24
    Turning on Power Before turning on power, make sure that peripherals, external speakers, and the AC cord are connected properly. There are two power supply switches: Main power switch on the top of the monitor and POWER button on the remote control unit. If the monitor is connected to a computer,
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 25
    ENGLISH Remote Control Unit Generally the monitor is operated using the remote control unit. INPUT (Input selection) Each time you press this button, the mode changes in the following order: • INPUT1 (DIGITAL) ➞ INPUT2 (ANALOG) ➞ INPUT3 (COMPONENT) ➞ INPUT4 (VIDEO) ➞ INPUT1 (DIGITAL)... * If the
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 26
    increases a value. Pressing decreases a value. Example of menu operation: Adjusting CONTRAST (video) in the GAIN CONTROL menu. 1. Press MENU to display the menu screen. ADJUSTMENT MANUAL CLOCK PHASE H-POS V-POS 1024x768 ANALOG AUTO 127 77 134 113 V: 60 Hz H: 48 KHz E 26
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 27
    BLACK LEVEL CONTRAST AUTO 15 15 ANALOG 1 0 2 4 x 7 6 8 V: 60 Hz H: 48 KHz 4. Press (or ) to adjust the setting. GAIN CONTROL MANUAL BLACK LEVEL CONTRAST AUTO 15 25 ANALOG 1 0 2 4 x 7 6 8 V: 60 Hz H: 48 KHz 5. Press MENU more than once to close the menu screen. The menu screen will
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 28
    Menu Items (Continued) Menu screen explanation Item: Select using the MENU button. Settings: Setting names and their status GAIN CONTROL MANUAL BLACK LEVEL CONTRAST AUTO 15 15 ANALOG Input signal: Displays the type of signal currently being input. Highlight: The currently selected item will be
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 29
    ENGLISH Initialization (Reset)/Functional Restriction Setting In the FUNCTION 1 screen, you can return contrast, image quality, and other settings to their factorypreset values, specify whether LEDs lights, and enable control via RS-232C (see page 38) among other functions. 1. After pressing SIZE
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 30
    41 for more information on the screen display for making adjustments. AUTO The CLOCK, PHASE, H-POS, and V-POS are automatically adjusted. [MANUAL (CLOCK)] Function Adjusts frequency for sampling clock for applicable video. Adjust when there is flickering in the form of vertical stripes. When
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 31
    (BLACK LEVEL)] Adjustable range 0 - 31 Default 15 + direction Brightens entire video signal. - direction Darkens entire video signal. [MANUAL (CONTRAST)] Adjustable range 0 - 31 Default 15 + direction For more contrast - direction For less contrast ■ WHITE BALANCE [THRU / COOL
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 32
    Settings and Adjustments (Continued) [CONTRAST] (INPUT3 / INPUT4) Adjustable range 0 - 31 Default 15 + direction For more contrast - direction For less contrast [BLACK LEVEL] (INPUT3 / INPUT4) Adjustable range 0 - 31 Default 15 + direction Brightens entire video signal. - direction
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 33
    selects input resolution. Adjustable range 852 / 848 / 640 Default 640 [768 LINES] (INPUT2) Function Manually selects input resolution. Adjustable range 1366 / 1360 / 1280 / 1024 Default 1024 [ENLARGE] (INPUT1/INPUT2) Function Sets the image enlargement ratio to be enlarged. Adjustable
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 34
    Settings and Adjustments (Continued) ■ MODE SELECT 2 [OFF TIMER] Function Specifies the remaining time before turning off the power. Adjustable range 0 - 23 Default 0 [OSD H-POSITION] Function Adjusts the horizontal display position of menu screen. How to adjust Use / to move menu screen.
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 35
    ENGLISH ■ Switching the screen size (INPUT1 / INPUT2) WIDE ZOOM 1 ZOOM 2 Displays image so it fills the entire screen. Displays edge portion of the image which is normally cut off. Use this size if ZOOM1 cuts off the subtitles. NORMAL Dot by Dot Displays image so it fills the screen
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 36
    Settings and Adjustments (Continued) • Using this monitor's screen size switching function to compress or expand the screen for commercial or public viewing in establishments like cafes or hotels may infringe on the rights of the creators, as protected by Copyright Law, so please be careful. • When
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 37
    up information. (Depending on the type of computer or OS, command names and methods may differ. Please follow the computer's own operation manual while reading this.) Installing set-up information For Windows 2000 This explanation is for installing and setting monitor set-up information on a Windows
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 38
    PC Operation PC connection 1. One-to-one connection with a PC...... Basic operation Connect with RS-232C straight cable between the PC COM port (RS-232C connector) and the RS232C input terminal on the back of monitor. ▼ Rear view RS-232C input terminal RS-232C INPUT To RS-232C input terminal RS-
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 39
    ENGLISH 2. Daisy chain connection from a single PC...... Advanced operation Connect with RS-232C straight cable between the PC COM port (RS-232C connector) and the RS232C input terminal on the back of monitor. Next, connect RS-232C straight cable to the first monitor's RS-232C output terminal and
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 40
    PC Operation (Continued) Communication procedure Basic operation When a command is sent from the PC to the monitor, the monitor operates according to the received command, and sends a response message to the PC. Carriage return code C1 C2 C3 C4 P1 P2 P3 P4 Command field (4
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 41
    ENGLISH Advanced operation This section explains commands for daisy chain connection. The basic communication procedure is the same as in the "Basic operation" section. You can assign a unique ID number to each monitor (see page 34). This allows you to control a particular monitor in
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 42
    PC Operation (Continued) The command examples shown on this page assume the following connection and ID number set up. PC ID number: 1 ID number: 2 ID number: 3 ID number: 4 IDST......A monitor receiving this command sets its own ID number in the parameter field.
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 43
    ENGLISH IDSL ....... The parameter of this command sets the ID number indicating the monitor subject to the next command. Example: IDSL0002 WAIT OK_002 VOLM0030 WAIT OK_002 VOLM0020 OK_001 ← The next command is for the monitor with ID number=2. ← Searching for monitor with ID number=2 ← Found
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 44
    PC Operation (Continued) This system has a function to allow setting of multiple monitors connected in a daisy chain using a single command. This function is called repeater control. The number of connectable monitors varies depending on the length of the cable used and the
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 45
    ENGLISH ■ Normal response • Response when no ID number has been set OK Carriage return code (0DH, 0AH) A response is returned when execution of the pertinent command is finished. • Response when an ID number has been set Space (20H) O K SPC 0 0 1
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 46
    PC Operation (Continued) ■ If execution of the command is taking some time WA I T Carriage return code (0DH, 0AH) If execution of a command takes some time, WAIT may be returned as the returned value. In this case, a value will be returned if you wait a while. During this time, new commands
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 47
    ENGLISH RS-232C command table Command: Command field (See page 40.) Direction: W When the "Parameter" is set in the parameter field (see page 40), the command functions as described under "Control/Response Contents". R The returned value indicated under "Reply
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 48
    PC Operation (Continued) Picture Adjustment (INPUT1) *can be used in standby mode Control item Command Direction Parameter Reply Control/Response contents * THRU WR 0 0 COOL WR 1 1 • WR 2 2 STD CTMP WR 3 3 WHITE • WR 4 4 Yes BALANCE WARM WR 5 5 USER WR 6 6 R-
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 49
    ENGLISH Picture Adjustment (INPUT2) *can be used in standby mode Control item Command Direction Parameter Reply Control/Response contents * Auto Sync. AUTO ADJUSTMENT ASNC W 1 No Clock CLCK WR 0-max value 0-max value Sync. Adjustment Phase H-Position PHSE WR 0-max value 0-max value
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 50
    PC Operation (Continued) Picture Adjustment (INPUT3/INPUT4) *can be used in standby mode Control item Command Direction Parameter Reply Control/Response contents * CONTRAST CONT WR 0-max value 0-max value BLACK LEVEL BLVL WR 0-max value 0-max value COLOR COLR WR 0-max value 0-max value
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 51
    ENGLISH Special Control *can be used in standby mode Control item Command Direction Parameter Reply Control/Response contents * 0 TIMER OFF W 1-23 OFF TIMER OFF TIMER OFTM No 0 TIMER OFF R 1-23 Remaining time ID NO. IDST W 0-255 Sets the monitor's ID number. Yes SETTING R
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 52
    Troubleshooting Before calling for repair services, make sure following checks for possible remedies to the encountered symptoms. Problem There is no picture or sound. Check item • Is the AC cord disconnected? • Is the main power switch turned off or is the monitor in
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 53
    or around the vents. Remove dust if possible. Ask your dealer about removing internal dust. • If the power LED blinks red, there might be a problem with the fan. Cracking sound The monitor sometimes makes a cracking sound. • You may hear cracking sound from the monitor. This happens when the cabinet
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 54
    . 59.5 (27) *1 S-video input will have priority over composite video when connected. *2 Through output for the analog computer input signal. Does not support plug and play. • As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 55
    between monitors and computers. Information about resolution and other parameters is exchanged between the two. This function can be used if the computer supports DDC and it has been configured to detect plug-and-play monitors. There are several types of DDC, depending on the communication method
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 56
    PC Digital/Analog Signal Input Compatibility Chart • Video • Sync • Supported frequencies Analog RGB (0.7 Vp-p) [75 Ω] Conforms to DVI (digital visual interface compatible with the monitor, according to your PC manual. * If the monitor is not receiving any signal (sync signal), [NO SIGNAL] will appear.
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 57
    ENGLISH Connector Compatibility Charts ■ PC digital RGB input terminal pins (DVI-D 24 pin) ■ PC analog RGB input terminal pins (Mini D-sub 15 pin) No. Function 1 TMDS data 2- 2 TMDS data 2+ 3 TMDS data 2/4 shield 4 N.C. 5 N.C. 6 DDC clock 7 DDC data 8 N.C. 9 TMDS data 1- 10 TMDS data
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 58
    3-3/4 [96] 1/4 [7] Dimensional Drawings 42-7/8 [1089] 30-3/4 [780] Opening width (39 [991]) Unit: inch [mm] Opening height (21-7/8 [557]) 25-3/8 [645] 24-1/8 [614] 15-3/4 [400] 4-5/8 [119] 7-8/7 [200] E 58
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 59
    0 to 255 0 to 255 0 to 255 OFF, 2 x 2, 3 x 3 2 x 2: 0 to 3, 3 x 3: 0 to 8 IMAGE ZOOM H-POS V-POS 0 to 23 0 to 255 ■ INPUT2 ADJUSTMENT MANUAL AUTO GAIN CONTROL WHITE BALANCE MANUAL AUTO COOL • STD • WARM USER MODE SELECT1 480 LINES 768 LINES ENLARGE ENLARGE POS MULTI ZOOM CLOCK PHASE H-POS
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 60
    Menu Option Reference Chart (Continued) MODE SELECT 2 ■ INPUT3/4 WHITE BALANCE MODE SELECT 2 OFF TIMER OSD H-POSITION OSD V-POSITION LANGUAGE ID NO SET CONTRAST BLACK LEVEL TINT COLORS SHARPNESS WHITE BALANCE OFF TIMER OSD H-POSITION OSD V-POSITION LANGUAGE ID NO SET 0 to 23 0 to 255 0 to 31 0 to
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 61
  • Sharp PN-455RUP | PN-455 Operation Manual - Page 62
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
ENGLISH
1
E
IMPORTANT INFORMATION
PN-455
LCD MONITOR
ENGLISH
IMPORTANT:
To aid reporting in case of loss or theft, please
record the product’s model and serial numbers in
the space provided. The numbers are located in
the rear of the product.
Model No.:
Serial No.:
U.S.A. ONLY
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
CAUTION
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT
REMOVE COVER.
NO USER-SERVICEABLE
PARTS INSIDE.
REFER SERVICING TO QUALI-
FIED SERVICE PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the pres-
ence of uninsulated “dangerous voltage”
within the product’s enclosure that may
be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within a triangle
is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in
the literature accompanying the product.