Sharp PN-525UP PN-525U Operation Manual

Sharp PN-525UP Manual

Get Sharp PN-525UP PDF manuals and user guides View all Sharp PN-525UP manuals
Add to My Manuals
Save this manual to your list of manuals

Sharp PN-525UP manual content summary:

  • Sharp PN-525UP | PN-525U Operation Manual - Page 1
    ENGLISH FRANÇAIS PN-525U LCD MONITOR MONITEUR LCD OPERATION MANUAL MODE D'EMPLOI ENGLISH ...... E1 FRANÇAIS .... F1
  • Sharp PN-525UP | PN-525U Operation Manual - Page 2
  • Sharp PN-525UP | PN-525U Operation Manual - Page 3
    ENGLISH PN-525U LCD MONITOR ENGLISH IMPORTANT: To aid reporting in case of loss or theft triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. CAUTION: The AC outlet shall be installed near
  • Sharp PN-525UP | PN-525U Operation Manual - Page 4
    . This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference
  • Sharp PN-525UP | PN-525U Operation Manual - Page 5
    SHARP LCD product. To ensure safety and many years of trouble- service life of your LCD product, please read the following precautions carefully before using the product. 1. Read instructions - All operating instructions must be read and understood before the product is operated. 2. Keep this manual
  • Sharp PN-525UP | PN-525U Operation Manual - Page 6
    danger. 16. Safety checks - Upon completion of service or repair work, request the service technician to perform safety checks to ensure that the product loss, including nuclear reaction control in nuclear facility, medical life support system, and missile launch control in a weapon system. WARNING
  • Sharp PN-525UP | PN-525U Operation Manual - Page 7
    INSTRUCTIONS - The TFT color LCD or tap the monitor with hard objects. - Please understand that Sharp Corporation bears no responsibility for errors made during use by the is broken or malfunctioning. Refer the servicing to the service representative. Manual Scope - Microsoft and Windows are
  • Sharp PN-525UP | PN-525U Operation Manual - Page 8
    Contents Introduction IMPORTANT INFORMATION 1 DEAR SHARP CUSTOMER 3 SAFETY PRECAUTIONS 3 TIPS AND SAFETY INSTRUCTIONS 5 Supplied Accessories 7 Part Names 7 Front view 7 Rear procedure 24 RS-232C command table 28 Troubleshooting and Specifications Troubleshooting 32 Specifications 33 E6
  • Sharp PN-525UP | PN-525U Operation Manual - Page 9
    � CD-ROM (Utility Disk for Windows): 1 � Operation manual: 1 � Blank sticker: 1 Place a blank sticker onto the SHARP logo to cover the logo. � Remote control unit: 1 waste. Follow the disposal instructions for your area. Front view Part Names 1 INPUT 2 3 45 1. LCD panel 2. Remote control
  • Sharp PN-525UP | PN-525U Operation Manual - Page 10
    Part Names Rear view 16 15 1 6 89 11 1. Main power switch (See page 14.) 2. AC input terminal (See page 12.) 3. PC/AV output terminal (DVI-D) (See page 11.) 4. PC1 input terminal (DVI-D) (See page 10.) AV1 input terminal (DVI-D) (See page 10.) 5. PC2 input terminal (Mini D-sub 15 pin) (See page
  • Sharp PN-525UP | PN-525U Operation Manual - Page 11
    the handles both on the rear and the unit bottom. Do not hold the LCD panel. This may cause product damage, failure, or injury. • Install the monitor requires special expertise and the work must be performed by an authorized SHARP dealer. You should never attempt to perform any of this work yourself
  • Sharp PN-525UP | PN-525U Operation Manual - Page 12
    plug from the power outlet before connecting/ disconnecting cables. Also, read the manual of the equipment to be connected. • Be careful not to mix up the input and output terminals may cause malfunctions and the other problems. Connection with a PC PC1 input terminal Connection with AV equipment
  • Sharp PN-525UP | PN-525U Operation Manual - Page 13
    ENGLISH Connecting Peripheral Equipment Other terminals PC/AV audio output terminals • Audio from the equipment connected to the AV audio input terminals or PC audio input terminal is output. Connect to the audio input terminals of the connected equipment using a commercially available audio cable
  • Sharp PN-525UP | PN-525U Operation Manual - Page 14
    Connecting the Power Cord Caution • Do not use a power cord other than the one supplied with the monitor. Be sure to use a power outlet of AC 120 V (60 Hz). Using power supply other than the one specified may cause fire. 1. Turn off the main power switch. 2. Plug the power cord (supplied) into the
  • Sharp PN-525UP | PN-525U Operation Manual - Page 15
    . 16.4 feet (5 m) at an angle of approx 10° from the center to the top/bottom/right/left of the remote control sensor. 2. See the instructions in the compartment and put in the supplied batteries (2 "AA" size batteries) with their plus (+) and minus (-) sides oriented correctly. 3. Close the cover
  • Sharp PN-525UP | PN-525U Operation Manual - Page 16
    -off status continues for approximately 1 week.* The date/time setting screen appears at power-on. Be sure to set the date and time. (* This is a guide. The power-off status that stops the clock depends on the status of the monitor.) Disabling power on/off operations Power on/power off operations
  • Sharp PN-525UP | PN-525U Operation Manual - Page 17
    . INFORMATION INPUT MODE SIZE COLOR MODE BRIGHT VOLUME ID No. MODEL S/N XXXX/XX/XX XXX XX:XX:XX : PC2 ANALOG : WIDE : STD : 15 : 15 :0 : PN-525U : 1024x768 V: 60 Hz H: 48.4 kHz 8. MODE (Color mode selection) Each time you press this button, the color mode changes in the following order: STD
  • Sharp PN-525UP | PN-525U Operation Manual - Page 18
    Basic Operation Switching the screen size Even when the screen size is changed, the display may remain the same depending on the input signal. WIDE PC input Displays image so it fills the entire screen. AV input An image with a 4:3 aspect ratio is stretched to fill the entire screen. ZOOM 1 PC
  • Sharp PN-525UP | PN-525U Operation Manual - Page 19
    Items that cannot be selected appear in gray. (e.g. Function not supported by the current input signal) 4. Press or to adjust the setting 1/2 PC2 ANALOG PICTURE AUTO AUDIO CONTRAST 40 SETUP BLACK LEVEL 96 OPTION SHARPNESS 12 ENLARGE PIP/PbyP 1024x768 V: 60 Hz H: 48.4 kHz OK...[MENU
  • Sharp PN-525UP | PN-525U Operation Manual - Page 20
    the hue. Selecting + changes the color towards green, and selecting - changes it towards magenta. COLORS (AV input) Adjusts the color intensity. SHARPNESS Adjusts the sharpness of the image. ADVANCED (AV input) You can adjust more specifically. (See page 22.) COLOR MODE Changes the color mode on the
  • Sharp PN-525UP | PN-525U Operation Manual - Page 21
    Menu Items ENGLISH SCREEN MOTION Residual images are reduced by moving the screen. PATTERN 1 .... The whole screen moves vertically and horizontally. PATTERN 2 .... A black screen spreads from the bottom of the screen and then shrinks to the bottom of the screen. If the monitor is installed in the
  • Sharp PN-525UP | PN-525U Operation Manual - Page 22
    screen in PbyP2 mode. AUTO OFF Sets the display method when no signals for the sub screen are input in PIP, PbyP, or PbyP2 mode. MANUAL....... Displays a main screen and a black sub screen. AUTO Displays the main screen as a full screen. TIPS • When WHITE BALANCE is set to THRU, BLACK LEVEL
  • Sharp PN-525UP | PN-525U Operation Manual - Page 23
    ENGLISH Menu Items Enlarge You can align 4, 9, 16, or 25 monitors and integrate them into a single large screen to display. Enlarged views of separated images are displayed in each monitor. In horizontal orientation Original image SCHEDULE You can set the time to switch the monitor on and off.
  • Sharp PN-525UP | PN-525U Operation Manual - Page 24
    digital compression. 3D-Y/C (AV3) Specify whether to perform 3-dimension Y/C separation. If dot interference or cross-color is occurring [Adj_uty.exe]. The adjustment pattern will appear. Adjust the screen automatically or manually. 4. When adjustment is finished, press the [Esc] on the computer's
  • Sharp PN-525UP | PN-525U Operation Manual - Page 25
    ENGLISH Initialization (Reset)/Functional Restriction Setting You can return the settings to their factory-preset values and restrict operations. 1. After pressing SIZE for about 5 seconds, press , , , and in that order. FUNCTION 1/1 ALL RESET ADJUSTMENT LOCK OSD DISPLAY LED RS-232C OFF
  • Sharp PN-525UP | PN-525U Operation Manual - Page 26
    Controlling the Monitor with a PC You can control this monitor from a PC via RS-232C (COM port) on the PC. You can also connect multiple monitors via a daisy chain by using a PC. By assigning ID numbers to each monitor (see page 25), you can make input mode selection/adjustment or can check the
  • Sharp PN-525UP | PN-525U Operation Manual - Page 27
    ENGLISH Controlling the Monitor with a PC Response code format When a command has been executed correctly OK Return code (0DH, 0AH) A response is returned after a command is executed. * If an ID number has been assigned Space (20H) Return code (0DH, 0AH) O K SPC 0 0 1 ID number of
  • Sharp PN-525UP | PN-525U Operation Manual - Page 28
    Controlling the Monitor with a PC Commands for ID control The command examples shown on this page assume the following connection and ID number set up. ID number: 1 ID number: 2 ID number: 3 ID number: 4 IDST .........A monitor receiving this command sets its own ID number in the parameter field.
  • Sharp PN-525UP | PN-525U Operation Manual - Page 29
    Repeater control This system has a function to allow setting of multiple monitors connected in a daisy chain using a single command. This function is called repeater control. You can use Repeater control function without assigning ID numbers. [Example] Set 1 Set 2 Set 3 Set 4 * If monitors
  • Sharp PN-525UP | PN-525U Operation Manual - Page 30
    Controlling the Monitor with a PC RS-232C command table How to read the command table Command: Command field (See page 24.) Direction: W When the "Parameter" is set in the parameter field (see page 24), the command functions as described under "Control/Response Contents". R The returned value
  • Sharp PN-525UP | PN-525U Operation Manual - Page 31
    BLVL WR 0-60 0-60 0-127 on PC2/PC3. TINT TINT WR 0-60 0-60 When the input mode is AV. Yes COLORS COLR WR 0-60 0-60 SHARPNESS SHRP WR 0-24 0-24 ADVANCED FLESH TONE FLES WR 0-2 0-2 0: OFF, 1: LOW, 2: HIGH 3D-NR TDNR WR 0-2 0-2 0: OFF, 1: LOW, 2: HIGH Yes MPEG-NR MPNR WR
  • Sharp PN-525UP | PN-525U Operation Manual - Page 32
    , 2: SUB Yes MAIN POS (Main screen) MWPP WR 0-1 0-1 0: POS1, 1: POS2 Yes PbyP2 POS (Sub screen) MW2P WR 0-2 0-2 0: POS1, 1: POS2, 2: POS3 Yes AUTO OFF MOFF WR 0-1 0-1 0: MANUAL, 1: AUTO Yes E 30
  • Sharp PN-525UP | PN-525U Operation Manual - Page 33
    ENGLISH Controlling the Monitor with a PC Initialization/Functional Restriction Setting (FUNCTION) menu ALL RESET Functio Command Direction RSET W Parameter 0 Reply Control/Response contents * No ADJUSTMENT LOCK ALCK WR 0-2 0-2 0: OFF Yes OSD DISPLAY LOSD WR 0-1 0-1 0: ON, 1: OFF
  • Sharp PN-525UP | PN-525U Operation Manual - Page 34
    Troubleshooting Before calling for repair services, make sure following checks for possible remedies to the Power LED flashes red. "SERVICE CALL" appears in the corner of the screen. • Hardware has a problem. Turn off the monitor and request repair from your SHARP dealer. When "TEMPERATURE" is
  • Sharp PN-525UP | PN-525U Operation Manual - Page 35
    Power consumption Dimensions inch (mm) Weight lbs. (kg) PN-525U 52" wide (132.2 cm diagonal) ASV low-reflection black TFT LCD 1920 x not support Repeater control function. *4 When AUTO INPUT CHANGE is ON. 7.5 W when it is OFF. As a part of our policy of continuous improvement, SHARP reserves
  • Sharp PN-525UP | PN-525U Operation Manual - Page 36
    16 [742] 2-5/8 [66] When mounting the monitor, be sure to use a wall-mount / ceiling-mount bracket they comply with the VESA-compatible mounting method. SHARP recommends using M6 screws and tighten the screws. Note that screw hole depth of the monitor is 3/8 inch (10 mm). Loose holding may cause
  • Sharp PN-525UP | PN-525U Operation Manual - Page 37
    between monitors and computers. Information about resolution and other parameters is exchanged between the two. This function can be used if the computer supports DDC and it has been configured to detect plug-and-play monitors. There are several types of DDC, depending on the communication method
  • Sharp PN-525UP | PN-525U Operation Manual - Page 38
    M E M O E 36
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
PN-525U
LCD MONITOR
MONITEUR LCD
OPERATION MANUAL
MODE D’EMPLOI
ENGLISH
......
E1
FRANÇAIS
....
F1
ENGLISH
FRANÇAIS