Sharp PN-E471R PN-E471R Operation Manual

Sharp PN-E471R Manual

Get Sharp PN-E471R PDF manuals and user guides
UPC - 074000046993
View all Sharp PN-E471R manuals
Add to My Manuals
Save this manual to your list of manuals

Sharp PN-E471R manual content summary:

  • Sharp PN-E471R | PN-E471R Operation Manual - Page 1
    PN-E471R PN-E421 LCD MONITOR OPERATION GUIDE
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 2
    procedure 18 Setting of the GAMMA user data 21 RS-232C command table 22 Controlling the Monitor with a PC (LAN 29 Settings to connect to a LAN 29 Controlling with a PC 31 Troubleshooting 37 Specifications 38 This guide contains instructions regarding operation, settings, and similar details
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 3
    view 1 Part Names 1. LCD panel 2. Remote control sensor 3. Input switch (See page 5.) 4. Power switch 5. Power LED TIPS • Use a pointed object such as a pen tip to press the switches at the front of the monitor. 2 345 nRear view 12 14 13 1 2 10 34 11 567 9 When the PN-ZB01 (optional) 8 is
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 4
    2. POWER button 3. DISPLAY button (See page 5.) 4. MUTE button (See page 5.) 5. VOL +/- buttons (See page 5.) BRIGHT +/- buttons (See page 5.) Cursor control ( / / / ) buttons 6. INPUT button (See page 5.) 7. MODE button (See page 5.) 8. SIZE button (See page 5.) 9. MENU button (See page 5.) E4
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 5
    not press any buttons for about 4 seconds, the BRIGHT menu automatically disappears. 2. DISPLAY Displays monitor information. When you press this button again, the display disappears. When the PN-ZB01 (optional) is attached, the display changes from INFORMATION1 → INFORMATION2 → clear display, and
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 6
    screen size with a different aspect ratio than the original image (e.g. TV broadcast or video input from external equipment). • When an ordinary non select the optimal screen size using the screen-size switching function of this monitor. With some software, there may be noise or distortion at the
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 7
    CONTRAST 78 SETUP BLACK LEVEL 84 OPTION TINT 30 ENLARGE COLORS 30 PIP/PbyP SHARPNESS 12 1920x1080 V: 60 Hz H: 67.5 kHz PC D-SUB OK···[MENU] • Items that cannot be selected appear in gray. (e.g. Function not supported by the current input signal) 4. Press or to adjust the setting
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 8
    PRESET R-CONTRAST G-CONTRAST B-CONTRAST COPY TO USER GAMMA RESET TREBLE BASS BALANCE RESET OSD H-POSITION OSD V-POSITION MONITOR MONAURAL AUDIO LANGUAGE POWER ON DELAY STANDBY MODE HDMI SETTING HDMI AUTO VIEW HDMI RGB INPUT RANGE HOT PLUG CONTROL HDMI DVI RS-232C/LAN SELECT
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 9
    BLEND PIP SOURCE SOUND CHANGE MAIN POS PbyP2 POS AUTO OFF TIPS • Some items may not be displayed depending on the input mode. Menu Items PN-ZB01 (optional) Not attached Attached
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 10
    . COLORS Adjusts the color intensity. SHARPNESS Adjusts the sharpness of the image. ADVANCED (AV input) You can adjust more specifically. (See page 16.) COLOR MODE Changes the color mode on the screen. The color mode on the screen can also be changed using a remote control unit. (See page 5.) * sRGB
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 11
    MONITOR Select the installation direction of the monitor the monitor is while the monitor is in mode, and control via LAN size control signal CONTROL Sets whether to use hot plug control control the monitor from the computer. ID No. SET Assigns ID numbers to monitors to control the monitor from
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 12
    page 15.) You can set the time to switch the monitor on and off. INPUT SELECT Select the input mode to . In this case select OFF. (Perform manual adjustment of the screen.) AUTO INPUT CHANGE follows: PC D-SUB, PC HDMI and AV HDMI When the PN-ZB01 (optional) is attached: PC DVI-D, PC HDMI, PC
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 13
    no signals for the sub screen are input in PIP, PbyP, or PbyP2 mode. MANUAL....... Displays a main screen and a black sub screen. AUTO Displays the main screen TO USER, and GAMMA • If GAMMA is set to USER, the following items cannot be set. WHITE BALANCE, PRESET, R-/G-/B-CONTRAST, and COPY TO USER •
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 14
    procedure In the ENLARGE menu, set ENLARGE H/V and ENLARGE-POS H/V. (See page 12.) 1. Set the number of monitors aligned in the horizontal direction in ENLARGE H. 2. Set the number of monitors aligned in the vertical direction in ENLARGE V. 3. Set the section of the separated image to be displayed
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 15
    . 3. Press . SCHEDULE becomes effective. (1) ●: SCHEDULE effective -: SCHEDULE not effective (2) POWER ON : Switches the monitor on at the specified time. OFF : Switches the monitor off at the specified time and puts the monitor in standby mode. (3) DAY OF THE WEEK Specifies the day of the week to
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 16
    item details.) FLESH TONE Adjust the hue control. 3D-NR Reduce the noise of playback images exe]. The adjustment pattern will appear. Adjust the screen automatically or manually. 4. When adjustment is finished, press the [Esc] on specifications of the input signal and is not a malfunction.) E 16
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 17
    SERVICE & SUPPORT, and SNMP (See page 11, and pages 33 to 36.) ADJUSTMENT LOCK You can disable operations on the monitor and the remote control unit , leave this setting as MONITOR. When using an optional part, if instruction appears, change the setting accordingly. CONTROLLER INPUT Normally, you do
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 18
    a daisy chain by using a PC. By assigning ID numbers to each monitor (see page 19), you can make input mode selection/adjustment or can check the status of a specific monitor. Precautions when the PN-ZB01 (optional) is attached • To control the monitor via RS-232C, set RS-232C/LAN SELECT to RS-232C
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 19
    section. nID numbers You can assign a unique ID number to each monitor (see page 11). This allows you to control a particular monitor in a daisy chain of monitors. You can assign ID numbers either from the menu screen (using the remote control) or from the PC using RS-232 cable. [Example] ID number
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 20
    (Parameter has no meaning.) Returned response. The ID ID : 001 IDLK : 002 ← number is also displayed on the monitor screen. IDCK000 + ← Repeater control. (If a command is used with repeater control, ID WAIT designation using IDSL or IDLK ID : 001 IDLK : 000 is canceled.) ID : 002 IDLK : 000
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 21
    : VOLM030 + ← Sets volume of all monitors to 30. In repeater control, responses are returned by all the connected monitors. If you want to determine that a value has been returned by a specific set, assign ID numbers to each monitor in advance. When some monitors do not return their responses, the
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 22
    be used in power standby mode. *2: PN-ZB01 (optional) limitations (A) When PN-ZB01 (optional) is not attached, (B) When PN-ZB01 (optional) is attached. ○ : The command can be used. - : Error (ERR) Power control/Input mode selection Function POWER CONTROL INPUT MODE SELECTION Command Direction
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 23
    Controlling the Monitor with a PC (RS-232C) PICTURE menu Function AUTO CONTRAST BLACK LEVEL TINT COLORS SHARPNESS 0-1 -10-10 1 -10-10 2 -10-10 3 0 2 3 0 1-17 COPY TO USER GAMMA USER R-CONTRAST G-CONTRAST B-CONTRAST RESET AUDIO menu Function TREBLE BASS BALANCE RESET CRTR WR CRTG WR CRTB WR
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 24
    H-POSITION OSD V-POSITION MONITOR MONAURAL AUDIO LANGUAGE Command Direction OSDH WR OSDV WR STDR WR MONO WR LANG WR POWER ON DELAY PWOD WR STANDBY MODE STBM WR HDMI SETTING HDMI AUTO VIEW HDAW WR HDMI RGB INPUT HDRA WR RANGE HOT PLUG CONTROL (DVI) HPCT WR HOT PLUG CONTROL (HDMI) HPCH WR
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 25
    Controlling the Monitor with a PC (RS-232C) OPTION menu Function DATE/TIME SETTING SCHEDULE Z2SP WR SCAN WR PMNG WR PMAV WR CSYS WR AOUT WR AIVP WR AADJ WR AINC WR Parameter Reply Control/Response contents *2 *1 (A) (B) AABBCCDDEE AABBCCDDEE AA: Year, BB: Month, CC: Day, DD: Time
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 26
    0-15 0-24 -999-999 -999-999 XXYY XXYY Reply Control/Response contents 0-4 0: OFF, 1: 2 x 2, 2: 3 x 3, 3: 4 x 4, 4: 5 x 5 11-55 1 x 1 (OFF) to 5 x 5 ("m x n" is expressed as "mn", where m and n are the numbers of monitors specified for the longest direction and the shortest direction respectively
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 27
    POS2 0-2 0: POS1, 1: POS2, 2: POS3 0-1 0: MANUAL, 1: AUTO Initialization/Functional Restriction Setting (FUNCTION) menu Function ALL 2: LED 0-2 0: OFF, 1: OSD & LED, 2: LED 0-1 0: MONITOR, 1: CONTROLLER 0-2 0: D-SUB, 1: HDMI ("ERR" when MONITOR is selected for POWER BUTTON.) 2: DVI-D ("ERR" when
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 28
    Controlling the Monitor with a PC (RS-232C) Others Function SCREEN SIZE (PC) SCREEN SIZE (AV) VOLUME MUTE INFORMATION MODEL GREEN GAMMA DATA READ BLUE GAMMA DATA READ USER DATA INITIALIZE USER DATA SAVE Command Direction Parameter Reply Control/Response contents UGRW W UGGW W UGBW
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 29
    PN-ZB01 (optional) is attached, your monitor can be connected to a LAN allowing you to control it from a PC on the LAN. You can also configure the monitor to send e-mail notification when it has a problem change this setting to ON. To set the address manually, set this to OFF. IP ADDRESS If the DHCP
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 30
    Internet Explorer. Controlling the monitor 1. Turn the power ON to the monitor. 2. Set RS-232C/LAN SELECT on the SETUP menu to LAN. PC operation 3. Launch Internet Explorer, in the "Address" box type "http://192.168.150.2/" and press the Enter key. You will be prompted to enter a user name and
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 31
    Error" will appear. Wait for a moment before operating your monitor again. • You cannot operate the monitor while it is warming up. • If "DHCP CLIENT" is set to "ON", press on the remote control unit two times and then check the monitor's IP address. Caution • Wait 10 seconds after clicking [OK
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 32
    See page 13.) • FUNCTION (See page 17.) ■ CONTROL You can control the operations corresponding to the buttons ( ) on the remote control unit. (See page 5.) TIPS • In standby mode, Power ON is the operation available. • MONITOR POWER turns the monitor power ON/ OFF regardless of the POWER BUTTON
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 33
    to restrict access to this monitor. After entering a user name and password, click [Apply]. ACCEPT IP ADDRESS You can limit access to this monitor by registering IP addresses of PCs that should have access. To limit access, specify the option "From only specific IP addresses". Otherwise, to allow
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 34
    Controlling the Monitor with a PC (LAN) ■ NETWORK (GENERAL) This screen allows you to specify the general LAN settings. ■ MAIL (ORIGINATOR) This screen allows you to configure the e-mail sent periodically or when the monitor has an error. The settings depend on the configuration of your LAN. Ask
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 35
    Controlling the Monitor with a PC (LAN) ■ MAIL (RECIPIENT) This screen allows you to specify the recipients of the e-mail sent periodically or when the monitor has an error. ■ MAIL (PERIODICAL) When PERIODICAL for CONDITION of MAIL (RECIPIENT) is checked, set the date and time to send the mail.
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 36
    letters and symbols can be used for the community name, user name and password. ■ SERVICE & SUPPORT (URL INFORMATION) You can display a specific URL in the URL INFORMATION field on the INFORMATION screen when an error occurs in the monitor. (See page 32.) SNMP SETTING Set whether to enable or
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 37
    If you are experiencing any problem with your display, before calling for service, please review the following troubleshooting tips. There is no picture or sound. • Is the power cord disconnected? • Is the main power switch off? • Is the monitor in standby mode (the power LED illuminating
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 38
    Specifications nProduct Specifications Model PN-E471R PN-E421 LCD component 47" Class [46-15/16 inch (119.3cm) 42" Class [42-1/16 inch (106.7cm) diagonal] TFT LCD diagonal] TFT LCD Max. resolution (pixels) 1920 x 1080 Max. colors Approx. 1.06 billion colors Pixel pitch 0.542 mm (H) ×
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 39
    [37] Specifications Unit: inch [mm] VESA holes * 7-7/8 [200] 7-7/8 [200] 3-15/16 3-15/16 [100] [100] 7-7/8 [200] 24-3/4 [628] Opening height (23-1/8 [588]) When mounting the monitor, be sure to use a wall-mount bracket that complies with the VESA-compatible mounting method. SHARP recommends
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 40
    Yes No Yes No Vsync Yes Yes No No *1 Upper value: PN-E471R, Lower value: PN-E421. *2 When PN-ZB01 (optional) is not connected. *3 When AUTO INPUT CHANGE is set to OFF. DMPM: Digital Monitor Power Management DMPM Monitor ON Active OFF Screen Display No display Power consumption*1 260 W*2 225
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 41
    Specifications nCompatible signal timing (PC) Screen .5kHz 60.0kHz 67.5kHz 47.8kHz 60.3kHz 49.7kHz 60.0kHz 64.0kHz 80.0kHz 47.7kHz 65.3kHz 55.9kHz Yes Yes Yes Yes Yes *1 Displays a reduced image. *2 Available when the PN-ZB01 (optional) is attached. * All are compliant only with non-interlaced.
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 42
    Specifications nPC/AV DVI-D input terminal pins (DVI-D 24 pin) nPC/AV HDMI input terminal pins (HDMITM Connector) No. Function 1 TMDS data 2- 2 TMDS data 2+ 3 TMDS data 2/4
  • Sharp PN-E471R | PN-E471R Operation Manual - Page 43
    PN-E471RE421 G EN10G(1)
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
PN-E471R
PN-E421
LCD MONITOR
OPERATION GUIDE