Sharp PN-E601 PN-E521 PN-E601 Operation Manual
Sharp PN-E601 Manual
 |
UPC - 074000046979
View all Sharp PN-E601 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp PN-E601 manual content summary:
- Sharp PN-E601 | PN-E521 | PN-E601 Operation Manual - Page 1
PN-E601 PN-E521 LCD MONITOR OPERATION GUIDE - Sharp PN-E601 | PN-E521 | PN-E601 Operation Manual - Page 2
Communication procedure 18 Setting of the GAMMA user data 21 RS-232C command table 22 Controlling the Monitor with a PC (LAN 29 Settings to connect to a LAN 29 Controlling with a PC 31 Troubleshooting 37 This guide contains instructions regarding operation, settings, and similar details. For - Sharp PN-E601 | PN-E521 | PN-E601 Operation Manual - Page 3
view 1 Part Names 1. LCD panel 2. Remote control sensor 3. Input switch (See page 5.) 4. Power switch 5. Power LED TIPS • Use a pointed object such as a pen tip to press the switches at the front of the monitor. 2 345 nRear view 12 14 13 1 2 10 34 11 567 9 When the PN-ZB01 (optional) 8 is - Sharp PN-E601 | PN-E521 | PN-E601 Operation Manual - Page 4
1. Signal transmitter 2. POWER button 3. MUTE button (See page 5.) 4. VOL +/- buttons (See page 5.) BRIGHT +/- buttons (See page 5.) Cursor control ( / / / ) buttons 5. DISPLAY button (See page 5.) 6. MODE button (See page 5.) 7. INPUT button (See page 5.) 8. MENU button (See page 5.) 9. SIZE - Sharp PN-E601 | PN-E521 | PN-E601 Operation Manual - Page 5
or to select the screen size. (See page 6.) 7. DISPLAY Displays monitor information. When you press this button again, the display disappears. When the PN-ZB01 (optional) is attached, the display changes from INFORMATION1 → INFORMATION2 → clear display, and so on every time you press this button - Sharp PN-E601 | PN-E521 | PN-E601 Operation Manual - Page 6
Displays the dots of the signals input from the connected PC as the corresponding dots on the screen. * Displays the dots of the input signals as the corresponding dots on the screen. *: With a monitor of screen resolution ratio than the original image (e.g. TV broadcast or video input from external - Sharp PN-E601 | PN-E521 | PN-E601 Operation Manual - Page 7
. nExample of operation (Adjusting CONTRAST in the PICTURE menu) MENU 1. Press to display the menu screen. SCREEN SCREEN PICTURE AUDIO SETUP OPTION ENLARGE PIP/PbyP AUTO CLOCK PHASE H-POS V-POS H-SIZE V-SIZE H-RESOLUTION V-RESOLUTION RESET 1/1 600 25 610 37 50 50 1920 1080 1920x1080 V: 60 Hz - Sharp PN-E601 | PN-E521 | PN-E601 Operation Manual - Page 8
TO USER GAMMA RESET TREBLE BASS BALANCE RESET OSD H-POSITION OSD V-POSITION MONITOR MONAURAL AUDIO LANGUAGE POWER ON DELAY STANDBY MODE HDMI SETTING HDMI AUTO VIEW HDMI RGB INPUT RANGE HOT PLUG CONTROL HDMI DVI RS-232C/LAN SELECT ID No. SET BAUD RATE LAN SETUP SPEAKER SELECT - Sharp PN-E601 | PN-E521 | PN-E601 Operation Manual - Page 9
MODES PIP SIZE PIP H-POS PIP V-POS PIP BLEND PIP SOURCE SOUND CHANGE MAIN POS PbyP2 POS AUTO OFF TIPS • Some items may not be displayed depending on the input mode. Menu Items PN-ZB01 (optional) Not attached Attached - Sharp PN-E601 | PN-E521 | PN-E601 Operation Manual - Page 10
input) You can adjust more specifically. (See page 16.) COLOR MODE Changes the color mode on the screen. The color mode on the screen can also be changed using a remote control unit. (See page 5.) * sRGB is PC input only. See page 5 for details. WHITE BALANCE THRU Displays the input signal level as - Sharp PN-E601 | PN-E521 | PN-E601 Operation Manual - Page 11
. LAN SETUP Configures the settings to control the monitor from the computer via LAN. (See page 29.) SPEAKER SELECT Selects the speaker to be used. OPTION DC OUT SETTING Normally, leave this setting as OFF. When using an optional part, if instruction appears, change the setting accordingly. 11 - Sharp PN-E601 | PN-E521 | PN-E601 Operation Manual - Page 12
connected to the PC D-sub/PC RGB input terminal outputs any of the following resolutions Perform manual and AV HDMI When the PN-ZB01 (optional) is monitors) in the vertical direction used for the enlargement. (See page 14.) ENLARGE-POS H / ENLARGE-POS V Specify the split screen to be displayed - Sharp PN-E601 | PN-E521 | PN-E601 Operation Manual - Page 13
in PIP, PbyP, or PbyP2 mode. MANUAL....... Displays a main screen and a black sub screen. AUTO Displays the main screen as a full screen. USER • STANDBY MODE cannot be set to LOW POWER when SCHEDULE is effective or when OFF is selected for LED in FUNCTION. nDual screen display You can display - Sharp PN-E601 | PN-E521 | PN-E601 Operation Manual - Page 14
monitor displays enlarged views of separated images. (Example) Horizontal direction: 2 monitors Vertical direction: 2 monitors Horizontal direction: 3 monitors Vertical direction: 2 monitors SETTING If you connect a laptop computer with any of the following screen resolutions and black bands - Sharp PN-E601 | PN-E521 | PN-E601 Operation Manual - Page 15
can be registered. • Setting the SCHEDULE flashes the power LED alternately in red and orange in standby mode. • A monitor on at the specified time. OFF : Switches the monitor off at the specified time and puts the monitor displayed on DVI, HDMI and BNC depend on INPUT SELECT settings. 15 E - Sharp PN-E601 | PN-E521 | PN-E601 Operation Manual - Page 16
control dimension display nAutomatic adjustment When you use the PC D-sub input terminal or PC RGB input terminals to display manual adjustment if necessary. nScreen display for adjustment Before making adjustments in the SCREEN menu or PICTURE menu, display or manually. 4. the display mode - Sharp PN-E601 | PN-E521 | PN-E601 Operation Manual - Page 17
, RS-232C/LAN SELECT, ID No. SET, BAUD RATE, NETWORK, MAIL, SERVICE & SUPPORT, and SNMP (See page 11, and pages 33 to 36.) ADJUSTMENT LOCK You can disable operations on the monitor and the remote control unit that use buttons. OFF....Enables operation. 1.........Disables all operations other - Sharp PN-E601 | PN-E521 | PN-E601 Operation Manual - Page 18
check the status of a specific monitor. Precautions when the PN-ZB01 (optional) is attached • To control the monitor via RS-232C, set RS-232C/LAN SELECT to RS-232C. • You cannot use RS-232C and LAN control simultaneously. PC connection nOne-to-one connection with a PC Connect with RS-232 straight - Sharp PN-E601 | PN-E521 | PN-E601 Operation Manual - Page 19
in the "One-to-one connection with a PC" section. nID numbers You can assign a unique ID number to each monitor (see page 11). This allows you to control a particular monitor in a daisy chain of monitors. You can assign ID numbers either from the menu screen (using the remote control) or from the PC - Sharp PN-E601 | PN-E521 | PN-E601 Operation Manual - Page 20
Cancelation complete VOLM0010 The volume of the monitor with ID number: OK 001 ← 1 (the one directly connected to the PC) is set to 002 ← number is also displayed on the monitor screen. IDCK000 + ← Repeater control. (If a command is used with repeater control, ID WAIT designation using IDSL - Sharp PN-E601 | PN-E521 | PN-E601 Operation Manual - Page 21
: VOLM030 + ← Sets volume of all monitors to 30. In repeater control, responses are returned by all the connected monitors. If you want to determine that a value has been returned by a specific set, assign ID numbers to each monitor in advance. When some monitors do not return their responses, the - Sharp PN-E601 | PN-E521 | PN-E601 Operation Manual - Page 22
longest direction Position of VSIZ WR the shortest direction Longest direction resolution HRES WR Shortest direction resolution VRES WR ARST W Parameter 1 0-1200 0-63 0-100 0-100 0-100 0-100 300-1920 200-1200 1 Reply Control/Response contents 0-1200 0-63 0-100 When the input mode is - Sharp PN-E601 | PN-E521 | PN-E601 Operation Manual - Page 23
Controlling the Monitor with a PC (RS-232C) PICTURE menu Function Auto CONTRAST BLACK LEVEL TINT COLORS SHARPNESS 0-1 -10-10 1 -10-10 2 -10-10 3 0 2 3 0 1-17 COPY TO USER GAMMA USER R-CONTRAST G-CONTRAST B-CONTRAST RESET AUDIO menu Function TREBLE BASS BALANCE RESET CRTR WR CRTG WR CRTB WR - Sharp PN-E601 | PN-E521 | PN-E601 Operation Manual - Page 24
next and all subsequent commands after this command. Clears the ID number if one has been designated. Displays monitor's own ID number and the selected ID number on the screen. 0: 9600bps, 1: 19200bps, 2: 38400bps 0: Internal speaker, 1: External speaker 0: OFF, 1: MODE1, 2: MODE2 ○○○ E 24 - Sharp PN-E601 | PN-E521 | PN-E601 Operation Manual - Page 25
Controlling the Monitor with a PC (RS-232C) OPTION menu Function Date/time setting SCHEDULE INPUT SELECT AUDIO SELECT DVI BNC HDMI PC DVI-D PC D-SUB PC HDMI PC RGB AV DVI-D AV HDMI INPUT RESOLUTION (PC) AV COMPONENT AV S-VIDEO AV VIDEO RESOLUTION CHECK PIXEL SETTING (PC D-SUB, PC RGB) INPUT - Sharp PN-E601 | PN-E521 | PN-E601 Operation Manual - Page 26
0-8 0-15 0-24 -999-999 -999-999 XXYY XXYY Reply Control/Response contents 0-4 11-55 0-100 0: OFF, 1: 2 x 2, 2: 3 x 3, 3: 4 x 4, 4: 5 x 5 1 x 1 (OFF) to 5 x 5 ("m x n" is expressed as "mn", where m and n are the numbers of monitors specified for the longest direction and the shortest direction - Sharp PN-E601 | PN-E521 | PN-E601 Operation Manual - Page 27
SUB 0-1 0: POS1, 1: POS2 0-2 0: POS1, 1: POS2, 2: POS3 0-1 0: MANUAL, 1: AUTO Initialization/Functional Restriction Setting (FUNCTION) menu Function ALL RESET ADJUSTMENT LOCK OSD DISPLAY LED TEMPERATURE ALERT STATUS ALERT POWER BUTTON CONTROLLER INPUT Command Direction RSET W ALCK WR LOSD WR - Sharp PN-E601 | PN-E521 | PN-E601 Operation Manual - Page 28
READ BLUE GAMMA DATA READ USER DATA INITIALIZE USER DATA SAVE Command Direction Parameter Reply Control/Response contents UGRW W UGGW user data cc: Checksum (ASCII data) of the block number and user data xxxx: User data of 32 pieces Initialize the user data. Save the user data in the monitor. - Sharp PN-E601 | PN-E521 | PN-E601 Operation Manual - Page 29
PN-ZB01 (optional) is attached, your monitor can be connected to a LAN allowing you to control it from a PC on the LAN. You can also configure the monitor to send e-mail notification when it has a problem. The connection this setting to ON. To set the address manually, set this to OFF. IP ADDRESS If - Sharp PN-E601 | PN-E521 | PN-E601 Operation Manual - Page 30
Controlling the Monitor with a PC (LAN) ■ To set from a PC When the monitor is connected to a PC, LAN settings can be configured via PC. Set up process (1) Connect your monitor to a PC (2) Specify the PC's IP address (3) Configure the monitor's LAN settings (1) Connecting your monitor to a PC - Sharp PN-E601 | PN-E521 | PN-E601 Operation Manual - Page 31
in Step 6, "(2) Specifying the PC's IP address". 11. Connect the monitor and the PC to the LAN. • If you see an monitor again. • You cannot operate the monitor while it is warming up. • If "DHCP CLIENT" is set to "ON", press DISPLAY on the remote control unit two times and then check the monitor - Sharp PN-E601 | PN-E521 | PN-E601 Operation Manual - Page 32
See page 13.) • FUNCTION (See page 17.) ■ CONTROL You can control the operations corresponding to the buttons (POWER INPUT SIZE ) on the remote control unit. (See page 5.) TIPS • In standby mode, Power ON is the operation available. • MONITOR POWER turns the monitor power ON/ OFF regardless of the - Sharp PN-E601 | PN-E521 | PN-E601 Operation Manual - Page 33
to restrict access to this monitor. After entering a user name and password, click [Apply]. ACCEPT IP ADDRESS You can limit access to this monitor by registering IP addresses of PCs that should have access. To limit access, specify the option "From only specific IP addresses". Otherwise, to allow - Sharp PN-E601 | PN-E521 | PN-E601 Operation Manual - Page 34
(NAME/LOCATION) Specify the information to display for this monitor in the Internet Explorer window. TIPS • The MONITOR NAME can be up to 16 alphanumeric method is "POP before SMTP", specify the account name and password to connect to the POP server. TIPS • You can enter up to 64 alphanumeric - Sharp PN-E601 | PN-E521 | PN-E601 Operation Manual - Page 35
Controlling the Monitor with a PC (LAN) ■ MAIL (RECIPIENT) This screen allows you to specify the recipients of the e-mail sent periodically or when the monitor has an error. ■ MAIL (PERIODICAL) When PERIODICAL for CONDITION of MAIL (RECIPIENT) is checked, set the date and time to send the mail. - Sharp PN-E601 | PN-E521 | PN-E601 Operation Manual - Page 36
letters and symbols can be used for the community name, user name and password. ■ SERVICE & SUPPORT (URL INFORMATION) You can display a specific URL in the URL INFORMATION field on the INFORMATION screen when an error occurs in the monitor. (See page 32.) SNMP SETTING Set whether to enable or - Sharp PN-E601 | PN-E521 | PN-E601 Operation Manual - Page 37
manual.) • Are the batteries exhausted? • Point the remote control unit toward the monitor's remote control sensor. • Is the menu display hidden or is operation disabled? (See page 17.) Sound from left and right speakers is reversed. Sound is heard from only one side. • Are audio cables connected - Sharp PN-E601 | PN-E521 | PN-E601 Operation Manual - Page 38
PN-E601E521 G EN09L(2)
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
 |
 |
PN-E601
PN-E521
LCD MONITOR
OPERATION GUIDE