Sharp PN-L601B PN-L601B Operation Manual

Sharp PN-L601B Manual

Get Sharp PN-L601B PDF manuals and user guides
UPC - 074000047082
View all Sharp PN-L601B manuals
Add to My Manuals
Save this manual to your list of manuals

Sharp PN-L601B manual content summary:

  • Sharp PN-L601B | PN-L601B Operation Manual - Page 1
    PN-L601B LCD MONITOR OPERATION MANUAL
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 2
    IMPORTANT: To aid reporting in case of loss or theft, please record the product's model and serial numbers in the space provided. The numbers are located in the rear of the product. Model No.: Serial No.: U.S.A. ONLY FOR CUSTOMERS IN U.K. IMPORTANT The wires in this mains lead are coloured in
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 3
    user to the presence of important operating and maintenance (servicing) instructions user's authority to operate this equipment. NOTE: This equipment has been tested and found to comply with the limits for Class A digital used in accordance with the instruction manual, may cause harmful interference
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 4
    collection system for these products. EU ONLY A. Information on Disposal for Users (private households) 1. In the European Union Attention: If you want PLEASE CONTACT YOUR LOCAL SHARP DEALER OR AUTHORIZED SERVICE REPRESENTATIVE FOR ASSISTANCE IN DISPOSING OF THIS BATTERY. U.S.A. AND CANADA ONLY E2
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 5
    SHARP LCD product. To ensure safety and many years of trouble service life of your LCD product, please read the following precautions carefully before using the product. 1. Read instructions - All operating instructions must be read and understood before the product is operated. 2. Keep this manual
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 6
    avoid these problems, make sure instructions in the compartment. • Do not mix old and new batteries. • Do not mix batteries of different types. Voltage specifications user support the monitor. • Ensuring the monitor is not overhanging the edge of the supporting furniture. • Not placing the monitor
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 7
    TIPS AND SAFETY INSTRUCTIONS - T he TFT color LCD panel used in this monitor is made with the application of high precision technology. However, there may be minute points on the screen where pixels never light or are permanently lit. Also, if the screen is viewed from an acute angle there may be
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 8
    specifications is required. Do not use any screw holes other than VESA holes for installation. • When moving the monitor screen. This may cause product damage, failure, or injury. • Install the monitor with the surface perpendicular to a level surface. • Mounting the monitor or a service engineer to
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 9
    the Monitor with a PC (LAN 38 Settings to connect to a LAN 38 Controlling with a PC 40 Troubleshooting 46 Specifications 48 For information on the touch panel driver, see the Touch Panel Driver Operation Manual. For information on the Pen Software, see the Pen Software Operation Manual
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 10
    Names 1 2 4 7 1. Touch pen ultrasonic sensor 2. Infrared transmitter/receiver 3. Touch panel power LED 4. Holder ( 23 Caution • Consult your SHARP dealer for attachment/detachment of the cover which may cause an electric shock. When the PN-ZB01 (optional) is attached 16. PC/AV DVI-D input
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 11
    nRemote control unit 1 2 7 3 8 4 5 9 6 Part Names 1. Signal transmitter 2. POWER button (See page 15.) 3. MUTE button (See page 18.) 4. VOL +/- buttons (See page 18.) BRIGHT +/- buttons (See page 18.) Cursor control ( / / / ) buttons 5. DISPLAY button (See page 18.) 6. MODE button (
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 12
    to the input and output terminals may cause malfunctions and the other problems. TIPS • When using the touch panel, connect the USB cable to the computer. For details, see the Touch Panel Driver Operation Manual. • Images may not be displayed properly depending on the computer (video card
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 13
    video requires an external device which supports HDCP. • This terminal allows the daisy chain connection of up to 5 monitors. TIPS • The length of screen may not display properly when using terminals other than PC DVI-D/AV DVI-D for the input mode. In this case, turn off the power to all the monitors
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 14
    cable clamp into the cable clamp attachment on the rear of the monitor and fasten the cables. Cable Cable clamp attachment Cable clamp Handle side. Caution • The removable handles and handle screws are for use with this monitor. Do not use them for any other devices. • To attach handles, be sure
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 15
    Peel off the backing sheet and affix the cover on the monitor. Preparing the Remote Control Unit Installing the batteries 1. Press bottom/right/left of the remote control sensor. Remote control sensor 2. See the instructions in the compartment and put in the supplied batteries (R-6 ("AA" size) x
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 16
    Attaching the Holder The touch pen, remote control unit, and eraser can be stored in the holder. Touch pen 1. Remove the peel-off sheets from the fasteners on the back side of the holder. 2. With the holder spread taut, affix it to the side of the monitor. Back side Remote control unit and Eraser
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 17
    or alternately blinks green and orange, the touch panel is being initialized. Do not touch the touch panel at this time. Touching the touch panel may cause malfunctioning. TIPS • When the main power switch is off, the monitor cannot be turned on. • If the monitor is in the input signal standby mode
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 18
    /time setting screen appears when the power is turned on, the internal battery may be exhausted. Please contact your local Sharp servicing dealer or service center for assistance with battery replacement. • Estimated service life of the internal battery: About 5 years (depending on monitor operation
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 19
    . For the procedure for using the eraser, refer to the Pen Software Operation Manual. Caution • When using the eraser, gently bring the cloth side into contact with the screen. Touching the screen with one of the non-cloth sides will damage the screen. • If there is any dirt or foreign matter on the
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 20
    size selection) The menu is displayed. Press or to select the screen size. (See page 19.) 7. DISPLAY Displays monitor information. When you press this button again, the display disappears. When the PN-ZB01 (optional) is attached, the display changes from INFORMATION1 → INFORMATION2 → clear display
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 21
    be cropped. In this case select the optimal screen size using the screen-size switching function of this monitor. With some software, there may be noise or distortion at the edges of the screen. This is due to the characteristics of the software, and is not a malfunction. • Depending on the original
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 22
    AUTO AUDIO CONTRAST 78 SETUP BLACK LEVEL 84 OPTION TINT 30 PIP/PbyP COLORS 30 SHARPNESS 12 1920x1080 V: 60 Hz H: 67.5 kHz PC D-SUB OK···[MENU] 4. Press or to adjust the setting. SCREEN PICTURE 1/2 PICTURE AUTO AUDIO CONTRAST 88 SETUP BLACK LEVEL 84 OPTION TINT 30 PIP
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 23
    it towards magenta. COLORS Adjusts the color intensity. SHARPNESS Adjusts the sharpness of the image. ADVANCED (AV input) You can adjust more specifically. (See page 26.) COLOR MODE Changes the color mode on the screen. The color mode on the screen can also be changed using a remote control unit
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 24
    compressed from the left and right ends. PATTERN1 PATTERN2 PATTERN3 PATTERN4 POWER ON DELAY You can delay the screen display after the monitor is turned on. The period can be set up to 60 seconds in units of one second. When this function is activated, the power LED flashes (at approx. 1 second
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 25
    monitor from the computer via LAN. (See page 38.) SPEAKER SELECT Selects the speaker to be used. OPTION DC OUT SETTING Normally, leave this setting as OFF. When using an optional part, if instruction / PAL / PAL-60 / SECAM / NTSC3. manual adjustment of the screen AV HDMI When the PN-ZB01 (optional) is
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 26
    sub screen are input in PIP, PbyP, or PbyP2 mode. MANUAL....... Displays a main screen and a black sub screen. AUTO Displays the main screen as a full screen. • If GAMMA is set to USER, the following items cannot be set. WHITE BALANCE, PRESET, USER, and COPY TO USER • STANDBY MODE cannot be set to
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 27
    MODE is LOW POWER, SCHEDULE cannot be set. 1920x1080 V: 60 Hz H: 67.5 kHz OK...[MENU] TIPS • Up to monitor on at the specified time. OFF : Switches the monitor off at the specified time and puts the monitor When not specifying, the screen at the previous power-off appears. Input modes displayed on DVI
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 28
    blurring on an image. MPEG-NR Reduce block noise caused by digital compression. 3D-Y/C (AV VIDEO) Specify whether to perform 3- screen automatically or manually. 4. When adjustment is finished, press the [Esc] on the computer's keyboard to quit the adjustment program. 5. Eject the CD-ROM from the CD
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 29
    items: LAN SETUP, RS-232C/LAN SELECT, ID No. SET, BAUD RATE, NETWORK, MAIL, SERVICE & SUPPORT, and SNMP (See pages 22 to 23, and pages 42 to 45.) ADJUSTMENT LOCK You can disable operations on the monitor and the remote control unit that use buttons. OFF ���Enables operation. 1 Disables all
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 30
    or can check the status of a specific monitor. Precautions when the PN-ZB01 (optional) is attached • To control the monitor via RS-232C, set RS-232C/ : VOLM 30 When inputting a negative value, specify a numerical value in three digits. Example: AUTR-009 Do not use spaces for MPOS, DATE, and SC01
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 31
    with a PC" section. nID numbers You can assign a unique ID number to each monitor (see page 22). This allows you to control a particular monitor in a daisy chain of monitors. You can assign ID numbers either from the menu screen or from the PC using RS-232 cable. [Example] ID number: 1 ID number
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 32
    executing IDLK0002) IDCK0000 ← (Parameter has no meaning.) Returned response. The ID ID : 001 IDLK : 002 ← number is also displayed on the monitor screen. IDCK000 + ← Repeater control. (If a command is used with repeater control, ID WAIT designation using IDSL or IDLK ID : 001 IDLK
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 33
    it 4 digits. * The checksum field is the character string (ASCII) data of lower-order one byte which indicates the sum of the block number and 32 pieces of data in hexadecimal (0 to F). nSaving the GAMMA user data Use the user data save command (UGSV) to save the transferred user data in the monitor
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 34
    Controlling the Monitor with a PC (RS-232C) RS- PN-ZB01 (optional) is attached. ○ : The command can be used. - : Error (ERR) Power control/Input mode selection Function POWER CONTROL Command Direction POWR W R Parameter 0 1 INPUT MODE SELECTION INPS W 0 1 2 3 4 6 7 8 9 10 R SCREEN
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 35
    Controlling the Monitor with a PC (RS-232C) PICTURE menu Function Auto CONTRAST BLACK LEVEL TINT COLORS SHARPNESS ADVANCED (When the CTMP WR Parameter 1 0-60 0-60 0-60 0-60 0-24 0-2 0-2 0-1 0-1 -10-10 1 -10-10 2 -10-10 3 0 2 3 0 1-17 COPY TO USER GAMMA USER R-CONTRAST G-CONTRAST B-CONTRAST
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 36
    1 2 3 4 5 6 0 1-60 0-1 0-1 0-1 0-2 Reply Control/Response contents 0-100 0-100 0-4 0-20 10-990 5-20 0-1 0-1 14 1 2 3 4 5 6 0 1-60 0-1 0-1 0-1 0-2 0: OFF, 1-4: number if one has been designated. Displays monitor's own ID number and the selected ID number on the screen. 0: 9600bps, 1: 19200bps, 2:
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 37
    Monitor RCA) AUDIO LEVEL(STEREO MINI) SELF ADJUST AUTO INPUT CHANGE TOUCH PANEL MODE Command Direction DATE WR SC01- WR SC08 DVSL WR 1: ON ○ 0-1 0-1 0: OFF, 1: ON ○ 0-5 0-5 0: AUTO, 1: PAL, 2: PAL-60, 3: SECAM, 4: NTSC3.58, 5: NTSC4.43 ○-○ 0-2 0-2 0: VARIABLE1, 1: FIXED, 2: VARIABLE2
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 38
    WR MWIP WR SOUND CHANGE MAIN POS (Main screen) PbyP2 POS (Sub screen) AUTO OFF MWAD WR MWPP WR MW2P WR POS2, 2: POS3 0-1 0: MANUAL, 1: AUTO Initialization/Functional Restriction LED, 2: LED 0-1 0: MONITOR, 1: CONTROLLER 0-2 0: D-SUB, 1: HDMI ("ERR" when MONITOR is selected for POWER BUTTON.)
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 39
    Controlling the Monitor with a PC (RS-232C) Others Function SCREEN SIZE (PC) SCREEN SIZE (AV) number xxxx: 32 pieces of user data cc: Checksum (ASCII data) of the block number and user data xxxx: User data of 32 pieces Initialize the user data. Save the user data in the monitor. *2 *1 (A) (B)
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 40
    PN-ZB01 (optional) is attached, your monitor can be connected to a LAN allowing you to control it from a PC on the LAN. You can also configure the monitor to send e-mail notification when it has a problem change this setting to ON. To set the address manually, set this to OFF. IP ADDRESS If the DHCP
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 41
    the power ON to the monitor. 2. Set RS-232C/LAN SELECT on the SETUP menu to LAN. PC operation 3. Launch Internet Explorer, in the "Address" box type "http://192.168.150.2/" and press the Enter key. You will be prompted to enter a user name and password. 4. Leave the user name and password boxes
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 42
    check, control, and change the monitor's status and settings by clicking the menu items on the left side of the screen. DHCP CLIENT If your LAN has a DHCP server and you wish to obtain an address automatically, change this setting to "ON". To set the address manually
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 43
    the monitor power ON/ OFF regardless of the POWER BUTTON setting in the FUNCTION menu. TIPS • The settings below cannot be configured from the Internet Explorer screen. - PICTURE menu: R/G/B-OFFSET - SETUP menu: OFF IF NO OPERATION - OPTION menu: VARIABLE2 on the AUDIO OUTPUT (RCA), TOUCH PANEL
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 44
    to restrict access to this monitor. After entering a user name and password, click [Apply]. ACCEPT IP ADDRESS You can limit access to this monitor by registering IP addresses of PCs that should have access. To limit access, specify the option "From only specific IP addresses". Otherwise, to allow
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 45
    an error. The settings depend on the configuration of your LAN. Ask your LAN administrator for details. MONITOR NAME Specify a name for this monitor as it should appear on the Internet Explorer screen. AUTO LOGOUT TIME Specify the time (in minutes) to elapse before automatically disconnecting this
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 46
    a PC (LAN) ■ MAIL (RECIPIENT) This screen allows you to specify the recipients of the e-mail sent periodically or when the monitor has an error. ■ MAIL (PERIODICAL) When PERIODICAL for CONDITION of MAIL (RECIPIENT) is checked, set the date and time to send the mail. RECIPIENT E-MAIL
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 47
    letters and symbols can be used for the community name, user name and password. ■ SERVICE & SUPPORT (URL INFORMATION) You can display a specific URL in the URL INFORMATION field on the INFORMATION screen when an error occurs in the monitor. (See page 41.) SNMP SETTING Set whether to enable or
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 48
    If you are experiencing any problem with your display, before calling for service, please review the following troubleshooting tips. There is no picture or sound. • Is the power cord disconnected? (See page 12.) • Is the main power switch off? (See page 15.) • Is the monitor in standby mode (the
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 49
    rise in temperature is likely. Internal temperature rises quickly if the vents on the monitor are blocked. - Internal temperature rises quickly if dust accumulates inside the monitor or around the vents. Remove dust if possible. Ask Sharp dealer about removing internal dust. Troubleshooting 47 E
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 50
    Specifications Model PN-L601B LCD component 60" Class [60-1/16 inch (152.5cm) diagonal] TFT LCD Max. resolution (pixels) 1920 x 1080 Max. colors Approx. 1.06 billion colors Pixel pitch 0.692 mm (H) × 0.692 mm (V) Viewing angle 160° right/left/up/down (contrast ratio ≥ 10) Screen
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 51
    13/16 [20] Specifications VESA holes * 7-7/8 PN-ZB01 (optional) is not connected. *2 When AUTO INPUT CHANGE is set to OFF. DMPM: Digital Monitor Power Management DMPM Monitor ON Active OFF Screen Display No display Power consumption 240 W*1 2.0 W*1*2 nDDC (plug and play) The monitor supports
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 52
    Specifications nCompatible signal timing (PC) Screen .5kHz 60.0kHz 67.5kHz 47.8kHz 60.3kHz 49.7kHz 60.0kHz 108.23MHz 117.01MHz 134.99MHz 135.76MHz Digital DVI*2 HDMI Yes Yes Yes Yes Yes to panel size then displayed. *2 Available when the PN-ZB01 (optional) is attached. * All are compliant
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 53
    nPC/AV DVI-D input terminal pins (DVI-D 24 pin) Specifications nPC/AV HDMI input terminal pins (HDMITM Connector) No. Function 1 TMDS data 2- 2 TMDS data 2+ 3 TMDS data 2/4 shield 4 N.C. 5 N.C. 6 DDC clock 7 DDC data 8 N.C. 9 TMDS data 1- 10 TMDS
  • Sharp PN-L601B | PN-L601B Operation Manual - Page 54
    PN-L601B Mu EN10J(1)
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
PN-L601B
LCD MONITOR
OPERATION MANUAL