Sharp PN-S655P Operation Manual

Sharp PN-S655P - 64.5" LCD Flat Panel Display Manual

Get Sharp PN-S655P - 64.5inch LCD Flat Panel Display PDF manuals and user guides
UPC - 074000046832
View all Sharp PN-S655P manuals
Add to My Manuals
Save this manual to your list of manuals

Sharp PN-S655P manual content summary:

  • Sharp PN-S655P | Operation Manual - Page 1
    PN-S655 LCD MONITOR OPERATION GUIDE
  • Sharp PN-S655P | Operation Manual - Page 2
    connect to a LAN 21 Controlling with a PC 23 This guide contains instructions regarding operation, settings, and similar details. For instructions regarding connection and installation, refer to the included Operation Manual. Manual Scope - Microsoft, Windows and Internet Explorer are registered
  • Sharp PN-S655P | Operation Manual - Page 3
    INFORMATION 1 XXXX/XX/XX XXX XX:XX:XX INPUT MODE : PC3 D-SUB SIZE : WIDE COLOR MODE : STD BRIGHT : 15 VOLUME : 15 ID No. : 0 MODEL : PN-S655 S/N : STATUS : XXXX-XXXX-XXXX-XXXX LAN 1920x1080 V: 60 Hz H: 66.3 kHz INFORMATION 2 XXXX/XX/XX XXX XX:XX:XX RS-232C/LAN SELECT : DHCP
  • Sharp PN-S655P | Operation Manual - Page 4
    Basic Operation nSwitching the screen size Even when the screen size is changed, the display may remain the same depending on the input signal. WIDE PC input Displays image so it fills the entire screen. ZOOM 1 AV input PC input AV input An image with a 4:3 aspect ratio is stretched to fill
  • Sharp PN-S655P | Operation Manual - Page 5
    TIPS • Items that cannot be selected appear in gray. (e.g. Function not supported by the current input signal) 4. Press or to adjust the setting. 40 SETUP BLACK LEVEL 96 OPTION TINT 30 ENLARGE COLORS 30 PIP/PbyP SHARPNESS 12 1920x1080 V: 60 Hz H: 66.3 kHz OK···[MENU] For items that
  • Sharp PN-S655P | Operation Manual - Page 6
    TINT Adjusts the hue. Selecting + changes the color towards green, and selecting - changes it towards magenta. COLORS Adjusts the color intensity. SHARPNESS Adjusts the sharpness of the image. ADVANCED (AV input) You can adjust more specifically. (See page 10.) COLOR MODE Changes the color mode on
  • Sharp PN-S655P | Operation Manual - Page 7
    Menu Items nSETUP OSD H-POSITION Adjusts the horizontal display position of menu screen. OSD V-POSITION Adjusts the vertical display position of menu screen. LANGUAGE Sets the display language for the menu screen. HDMI AUTO VIEW When ON is selected, the screen size is adjusted automatically
  • Sharp PN-S655P | Operation Manual - Page 8
    screen in PbyP2 mode. AUTO OFF Sets the display method when no signals for the sub screen are input in PIP, PbyP, or PbyP2 mode. MANUAL....... Displays a main screen and a black sub screen. AUTO Displays the main screen as a full screen. TIPS • When WHITE BALANCE is set to THRU, BLACK LEVEL
  • Sharp PN-S655P | Operation Manual - Page 9
    Menu Items nEnlarge • You can align several monitors and integrate them into a single large screen to display. • Up to five monitors can be aligned in both the longest and shortest directions. • Each monitor displays enlarged views of separated images. (Example) Longest direction: 2 monitors
  • Sharp PN-S655P | Operation Manual - Page 10
    ROM drive. 2. Open the CD-ROM in [My Computer]. 3. Double-click [Adj_uty.exe]. The adjustment pattern will appear. Adjust the screen automatically or manually. 4. When adjustment is finished, press the [Esc] on the computer's keyboard to quit the adjustment program. 5. Eject the CD-ROM from the CD
  • Sharp PN-S655P | Operation Manual - Page 11
    RESET2.....Returns all settings to the factory default settings except for the following items: LAN SETUP, RS-232C/LAN SELECT, NETWORK, MAIL, and SERVICE & SUPPORT (See page 7, and pages 25 to 28.) ADJUSTMENT LOCK You can disable operations on the monitor and the remote control unit that use buttons
  • Sharp PN-S655P | Operation Manual - Page 12
    Controlling the Monitor with a PC (RS-232C) You can control this monitor from a PC via RS-232C (COM port) on the PC. You can also connect multiple monitors via a daisy chain by using a PC. By assigning ID numbers to each monitor (see page 13), you can make input mode selection/adjustment or can
  • Sharp PN-S655P | Operation Manual - Page 13
    Controlling the Monitor with a PC (RS-232C) nResponse code format When a command has been executed correctly O K Return code (0DH, 0AH) A response is returned after a command is executed. * If an ID number has been assigned Space (20H) Return code (0DH, 0AH) O K SPC 0 0 1 ID number of
  • Sharp PN-S655P | Operation Manual - Page 14
    Controlling the Monitor with a PC (RS-232C) nCommands for ID control The command examples shown on this page assume the following connection and ID number set up. ID number: 1 ID number: 2 ID number: 3 ID number: 4 IDST..........A monitor receiving this command sets its own ID number in the
  • Sharp PN-S655P | Operation Manual - Page 15
    Controlling the Monitor with a PC (RS-232C) nRepeater control This system has a function to allow setting of multiple monitors connected in a daisy chain using a single command. This function is called repeater control. You can use Repeater control function without assigning ID numbers. [Example]
  • Sharp PN-S655P | Operation Manual - Page 16
    Controlling the Monitor with a PC (RS-232C) RS-232C command table How to read the command table Command: Command field (See page 12.) Direction: W When the "Parameter" is set in the parameter field (see page 12), the command functions as described under "Control/Response Contents". R The
  • Sharp PN-S655P | Operation Manual - Page 17
    127 on PC3/PC4. BLACK LEVEL BLVL WR 0-60 0-60 0-127 on PC3/PC4. TINT TINT WR 0-60 0-60 B COLORS COLR WR 0-60 0-60 SHARPNESS SHRP WR 0-24 0-24 ADVANCED FLESH TONE FLES WR 0-2 0-2 0: OFF, 1: LOW, 2: HIGH (When the input 3D-NR TDNR WR 0-2 0-2 0: OFF, 1: LOW, 2: HIGH mode
  • Sharp PN-S655P | Operation Manual - Page 18
    Controlling the Monitor with a PC (RS-232C) SETUP menu Function Command Direction Parameter Reply Control/Response contents * OSD H-POSITION OSDH WR 0-100 0-100 B OSD V-POSITION OSDV WR 0-100 0-100 LANGUAGE LANG WR 14 14 ENGLISH 1 1 DEUTSCH 2 2 FRANÇAIS 3 3 ITALIANO B 4
  • Sharp PN-S655P | Operation Manual - Page 19
    WR 0-1 0-1 0: POS1, 1: POS2 B PbyP2 POS (Sub screen) MW2P WR 0-2 0-2 0: POS1, 1: POS2, 2: POS3 B AUTO OFF MOFF WR 0-1 0-1 0: MANUAL, 1: AUTO B Initialization/Functional Restriction Setting (FUNCTION) menu Function Command Direction Parameter Reply Control/Response contents * ALL
  • Sharp PN-S655P | Operation Manual - Page 20
    Controlling the Monitor with a PC (RS-232C) Others Function SCREEN SIZE (PC) SCREEN SIZE (AV) VOLUME MUTE INFORMATION MODEL SERIAL NO BRIGHT TEMPERATURE SENSOR Command Direction WIDE WR WIDE WR VOLM WR MUTE WR INF1 R SRNO R VLMP WR DSTA R Parameter 1-5 1-5 0-31 0-1 0-31
  • Sharp PN-S655P | Operation Manual - Page 21
    also configure the monitor to send e-mail notification when it has a problem. The connection requires a commercially available LAN cable (UTP cable, Category an address automatically, change this setting to ON. To set the address manually, set this to OFF. IP ADDRESS If the DHCP CLIENT is set to
  • Sharp PN-S655P | Operation Manual - Page 22
    Controlling the Monitor with a PC (LAN) ■ To set from a PC When the monitor is connected to a PC, LAN settings can be configured via PC. Set up process (1) Connect your monitor to a PC (2) Specify the PC's IP address (3) Configure the monitor's LAN settings (1) Connecting your monitor to a PC
  • Sharp PN-S655P | Operation Manual - Page 23
    . DHCP CLIENT If your LAN has a DHCP server and you wish to obtain an address automatically, change this setting to "ON". To set the address manually, set this to "OFF". IP ADDRESS If the DHCP CLIENT is set to "OFF", specify an IP address. SUBNET MASK If the DHCP CLIENT is
  • Sharp PN-S655P | Operation Manual - Page 24
    Controlling the Monitor with a PC (LAN) ■ INFORMATION Information about this monitor appears. ■ ADJUSTMENT You can adjust these settings which are also available on the monitor's menu. • SCREEN (See page 6.) • PICTURE (See Page 6.) • PICTURE (ADVANCED) (See Page 6.) • AUDIO (See page 6.) • SETUP (
  • Sharp PN-S655P | Operation Manual - Page 25
    . DHCP CLIENT If your LAN has a DHCP server and you wish to obtain an address automatically, change this setting to "ON". To set the address manually, set this to "OFF". IP ADDRESS If the DHCP CLIENT is set to "OFF", specify an IP address. SUBNET MASK If the DHCP CLIENT is
  • Sharp PN-S655P | Operation Manual - Page 26
    Controlling the Monitor with a PC (LAN) ■ NETWORK (GENERAL) This screen allows you to specify the general LAN settings. ■ MAIL (ORIGINATOR) This screen allows you to configure the e-mail sent periodically or when the monitor has an error. The settings depend on the configuration of your LAN. Ask
  • Sharp PN-S655P | Operation Manual - Page 27
    Controlling the Monitor with a PC (LAN) ■ MAIL (RECIPIENT) This screen allows you to specify the recipients of the e-mail sent periodically or when the monitor has an error. ■ MAIL (PERIODICAL) When PERIODICAL for CONDITION of MAIL (RECIPIENT) is checked, set the date and time to send the mail.
  • Sharp PN-S655P | Operation Manual - Page 28
    Controlling the Monitor with a PC (LAN) ■ SERVICE & SUPPORT (URL INFORMATION) You can display a specific URL in the URL INFORMATION field on the INFORMATION screen when an error occurs in the monitor. (See page
  • Sharp PN-S655P | Operation Manual - Page 29
    M E M O 29 E
  • Sharp PN-S655P | Operation Manual - Page 30
    PN-S655 G EN08F(1)
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
PN-S655
LCD MONITOR
OPERATION GUIDE