Sharp PN-U423 Operation Manual

Sharp PN-U423 Manual

Get Sharp PN-U423 PDF manuals and user guides View all Sharp PN-U423 manuals
Add to My Manuals
Save this manual to your list of manuals

Sharp PN-U423 manual content summary:

  • Sharp PN-U423 | Operation Manual - Page 1
    PN-U553 PN-U473 PN-U423 LCD MONITOR OPERATION MANUAL
  • Sharp PN-U423 | Operation Manual - Page 2
    IMPORTANT: To aid reporting in case of loss or theft, please record the product's model and serial numbers in the space provided. The numbers are located in the rear of the product. Model No.: Serial No.: U.S.A. ONLY
  • Sharp PN-U423 | Operation Manual - Page 3
    user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: FCC Regulations and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of
  • Sharp PN-U423 | Operation Manual - Page 4
    SHARP LCD product. To ensure safety and many years of trouble service life of your LCD product, please read the following precautions carefully before using the product. 1. Read instructions - All operating instructions must be read and understood before the product is operated. 2. Keep this manual
  • Sharp PN-U423 | Operation Manual - Page 5
    avoid these problems, make sure instructions in the compartment. • Do not mix old and new batteries. • Do not mix batteries of different types. Voltage specifications support the monitor. • Ensuring the monitor is not overhanging the edge of the supporting furniture. • Not placing the monitor
  • Sharp PN-U423 | Operation Manual - Page 6
    heat, outbreak of fire, or malfunction. Please request a cleaning of the inside of the monitor from an authorized SHARP servicing dealer or service center. - Images cannot be rotated on this monitor. When using in portrait orientation, you will need to prepare appropriately orientated content in
  • Sharp PN-U423 | Operation Manual - Page 7
    ambient temperature within the required range. (32°F (0°C) and 104°F (40°C) for the PN-U473/PN-U423) • Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such cases, please check the temperature condition specified by the optional
  • Sharp PN-U423 | Operation Manual - Page 8
    command table 34 Controlling the Monitor with a PC (LAN 39 Settings to connect to a LAN 39 Controlling with a PC 41 "Advanced operation" Command-based control.........44 Troubleshooting 45 Specifications 47 Mounting Precautions (For SHARP dealers and service engineers 53 Supplied Components
  • Sharp PN-U423 | Operation Manual - Page 9
    ( ) A commercially available anti-theft lock can be connected. The anti-theft hole is compatible with the Kensington MicroSaver Security System. Caution • Consult your SHARP dealer for attachment/detachment of optional parts. • When lifting or moving the monitor, do not hold by the speakers. 9E
  • Sharp PN-U423 | Operation Manual - Page 10
    Part Names nRemote control unit 1 2 7 3 8 4 9 10 5 11 6 1. Signal transmitter 2. POWER button (See page 16.) 3. MUTE button (See page 18.) 4. VOL +/- buttons (See page 18.) BRIGHT +/- buttons (See page 18.) Cursor control ( / / / ) buttons 5. DISPLAY button (See page 18.) 6. MODE
  • Sharp PN-U423 | Operation Manual - Page 11
    connecting/ disconnecting cables. Also, read the manual of the equipment to be connected. • output terminals may cause malfunctions and the other problems. • Do not use any cable that this monitor by connecting the playback device to the monitor's audio input, and connecting the monitor's audio
  • Sharp PN-U423 | Operation Manual - Page 12
    RS-232C output terminal 12. RS-232C input terminal • You can control the monitor from a PC by connecting a commercially available RS-232 straight cable between these terminals and the PC. • PN-U553/PN-U473/PN-U423 monitors can be connected together in a daisy chain connection. 13. LAN terminal • You
  • Sharp PN-U423 | Operation Manual - Page 13
    Connecting the Power Cord Caution • Use only the power cord supplied with the monitor. 1. Turn off the main power switch. 2. Plug the power cord (supplied) into the AC input terminal. 3. Plug the power cord (supplied) into the AC power
  • Sharp PN-U423 | Operation Manual - Page 14
    [PN-U553] [PN-U473] Binding Cables The cables connected to the terminals on the rear of the monitor can be fastened with the cable clamp. Attach the cable clamp into the cable clamp attachment on the rear of the monitor and fasten the cables. Cable clamp Cable clamp attachment Cable [PN-U423] E
  • Sharp PN-U423 | Operation Manual - Page 15
    .4 feet (5 m) at an angle of approx 10° from the center to the top/ bottom/right/left of the remote control sensor. 2. See the instructions in the compartment and put in the supplied batteries (R-6 ("AA" size) x 2) with their plus (+) and minus (-) sides oriented correctly. 3. Close the cover. TIPS
  • Sharp PN-U423 | Operation Manual - Page 16
    at least 5 seconds. • For a complete electrical disconnection, pull out the main plug. Status Green lit Orange lit Green flashing Power LED Status of the monitor Power on Power off (Standby mode) Input signal waiting mode Caution • When switching the main power switch or the POWER button off and
  • Sharp PN-U423 | Operation Manual - Page 17
    nDate/time setting • If the time has not been set, such as when the monitor is first turned on, set the date and time in DATE/TIME SETTING of the SETUP menu. remains off for about 1 week.* (*Approximate time. The actual time varies depending on the state of the monitor.) Turning Power On/Off 17 E
  • Sharp PN-U423 | Operation Manual - Page 18
    this button, the screen size changes in the following order: (See page 19.) WIDE → NORMAL → CUSTOM → Dot by Dot →WIDE... 9. DISPLAY Displays monitor information (Input mode, Audio). The display disappears automatically after about 5 seconds. 10. MODE (Color mode selection) Each time you press this
  • Sharp PN-U423 | Operation Manual - Page 19
    with CUSTOM ZOOM in the SCREEN menu. TIPS • Using this monitor's screen-size switching or dual-screen display functions to compress or case select the optimal screen size using the screen-size switching function of this monitor. With some software, there may be noise or distortion at the edges of
  • Sharp PN-U423 | Operation Manual - Page 20
    be selected appear in gray. (e.g. Function not supported by the current input signal) 4. Press or to adjust the setting. SCREEN PICTURE PICTURE BRIGHT 31 CONTRAST 60 AUDIO BLACK LEVEL 50 SETUP TINT COLORS MONITOR SHARPNESS 50 COLOR ADJUSTMENT MULTI/PIP ADVANCED OTHERS RESET
  • Sharp PN-U423 | Operation Manual - Page 21
    signals changes. For images with black edges, etc., depending on the signal, adjustment may not be possible. In this case select OFF. (Perform manual adjustment of the screen.) CLOCK (D-SUB) Adjusts frequency for sampling clock for applicable video. Adjust when there is flickering in the form of
  • Sharp PN-U423 | Operation Manual - Page 22
    hue. Selecting - changes the color towards green, and selecting + changes it towards magenta. COLORS (HDMI/COMPONENT/VIDEO) Adjusts the color intensity. SHARPNESS Adjusts the sharpness of the image. COLOR ADJUSTMENT COLOR MODE Changes the color mode on the screen. The color mode on the screen can
  • Sharp PN-U423 | Operation Manual - Page 23
    used to input audio signals in each input mode. COMMUNICATION SETTING RS-232C/LAN SELECT Selects the method with which to control the monitor from the computer. LAN SETUP Configures the settings to control the monitor from the computer via LAN. (See page 39.) ID No. SET Assigns ID numbers to
  • Sharp PN-U423 | Operation Manual - Page 24
    mode is reduced. Note, however that, more power will be consumed in standby mode. When LOW POWER is selected, current consumption is reduced while the monitor is in standby mode. Note, however, that the startup time from standby mode becomes longer. If set to LOW POWER, RS-232C commands cannot be
  • Sharp PN-U423 | Operation Manual - Page 25
    Menu Items nOTHERS SCREEN MOTION Residual images can be reduced by moving the entire screen vertically and horizontally. Set the time (operating interval) until the screen moves. POWER MANAGEMENT POWER MANAGEMENT determines whether or not to switch modes from no signal to the input signal standby
  • Sharp PN-U423 | Operation Manual - Page 26
    cases, dual-screen display is turned off: - The power is turned off - Input signal waiting mode is entered Horizontal direction: 3 monitors Vertical direction: 2 monitors Setting procedure Set using MULTI in the MULTI/PIP menu. 1. Set ENLARGE to ON. 2. Select ADVANCED (ENLARGE). 3. Set the number
  • Sharp PN-U423 | Operation Manual - Page 27
    Menu Items nSCHEDULE You can set the time to switch the monitor on and off. Set this function with SCHEDULE in the SETUP menu. (See page 23.) SCHEDULE D-SUB (1) XXXX / XX / XX XX XX : XX : XX (2) ON - : - (3)
  • Sharp PN-U423 | Operation Manual - Page 28
    Computer]. 3. Double-click [Adj_uty.exe]. The adjustment pattern will appear. Adjust the screen automatically or manually. 4. When adjustment is finished, press the [Esc] on the computer's keyboard to quit the . (This is due to the specifications of the input signal and is not a malfunction.) E 28
  • Sharp PN-U423 | Operation Manual - Page 29
    then press . ENTER After initialization, turn the main power switch off and then back on. ADJUSTMENT LOCK You can disable operations on the monitor and the remote control unit that use buttons. OFF ���Enables operation. ON Disables all operations other than turning power on/off and FUNCTION. OSD
  • Sharp PN-U423 | Operation Manual - Page 30
    mode selection/adjustment or can check the status of a specific monitor. TIPS • To control the monitor via RS-232C, set RS-232C/ LAN SELECT (commercially available) nDaisy chain connection... Advanced operation PN-U553/PN-U473/PN-U423 monitors can be connected together in a daisy chain connection
  • Sharp PN-U423 | Operation Manual - Page 31
    the "One-to-one connection with a PC" section. nID numbers You can assign a unique ID number to each monitor (see page 23). This allows you to control a particular monitor in a daisy chain of monitors. You can assign ID numbers either from the menu screen or from the PC using RS-232 cable. [Example
  • Sharp PN-U423 | Operation Manual - Page 32
    ID number: 2 to 20.* WAIT OK 002 IDLK0000 ← Canceling fixed ID number setting WAIT ← Canceling IDLK OK 002 ← Cancelation complete VOLM0010 The volume of the monitor with ID number: OK 001 ← 1 (the one directly connected to the PC) is set to 10. (IDLK is canceled.) * The IDLK command remains
  • Sharp PN-U423 | Operation Manual - Page 33
    . If you want to determine that a value has been returned by a specific set, assign ID numbers to each monitor in advance. When some monitors do not return their responses, the probable cause is that the monitors could not receive the command or command processing is not complete. Do not send
  • Sharp PN-U423 | Operation Manual - Page 34
    Controlling the Monitor with a PC (RS-232C) RS-232C command table How to read the command table Command: Direction: Parameter: Reply: * : Command field (See page 30.) W When the "
  • Sharp PN-U423 | Operation Manual - Page 35
    Controlling the Monitor with a PC (RS-232C) PICTURE menu Function BRIGHT CONTRAST BLACK LEVEL TINT (HDMI, COMPONENT, VIDEO) COLORS (HDMI, COMPONENT, VIDEO) SHARPNESS COLOR ADJUSTMENT COLOR MODE WHITE THRU BALANCE PRESET Command Direction VLMP WR CONT WR BLVL WR TINT WR COLR WR
  • Sharp PN-U423 | Operation Manual - Page 36
    for the command immediately after this command. 0 Clears the ID number if one has been designated. ID NO. SETTING IDLK W (SUBSEQUENT) 1-26 Sets a monitor ID number. This ID number is effective for the next and all subsequent commands after this command. 0 Clears the ID number if one has
  • Sharp PN-U423 | Operation Manual - Page 37
    14 1-2 Reply Control/Response contents * 0-1 0: OFF, 1: ON 11-55 1 x 1 (OFF) to 5 x 5 ("m x n" is expressed as "mn", where m and n are the numbers of monitors specified for the longest direction and the shortest direction respectively.) 11-55 Specifies values in the order of IMAGE POSITION IN
  • Sharp PN-U423 | Operation Manual - Page 38
    STCA W 0 R Reply Control/Response contents * 0-31 ○ 0-1 0: OFF, 1: ON - 0 Internal temperature normal 1 Internal temperature abnormal has occurred and the monitor is in standby mode 2 Internal temperature abnormal occurred (To delete the information of temperature abnormal, turn off the
  • Sharp PN-U423 | Operation Manual - Page 39
    You cannot use RS-232C and LAN control simultaneously. ■ To set on the monitor Set RS-232C/LAN SELECT of COMMUNICATION SETTING on the SETUP menu to LAN, obtain an address automatically, change this setting to ON. To set the address manually, set this to OFF. IP ADDRESS If the DHCP CLIENT is set to
  • Sharp PN-U423 | Operation Manual - Page 40
    and then reboot the PC. LAN terminal PC To LAN terminal LAN cable (commercially available, crossover) (2) Specifying the PC's IP address To configure the monitor's LAN settings, you must temporarily change the settings on the PC. This explanation is based on Windows 7. 1. Log on to the PC with an
  • Sharp PN-U423 | Operation Manual - Page 41
    the LAN to control the monitor. 1. Launch Internet Explorer on the PC. 2. In the "Address" box, type "http://" followed by your monitor's IP address followed by an address automatically, change this setting to ON. To set the address manually, set this to OFF. IP ADDRESS If the DHCP CLIENT is set
  • Sharp PN-U423 | Operation Manual - Page 42
    a PC (LAN) ■ PC operation 1 2 3 4 5 For details on each item, see below. SCREEN PICTURE INPUT SOURCE AUDIO VOLUME SETUP SCHEDULE LAN SETUP MONITOR MULTI/PIP OTHERS SNMP FUNCTION Page 21 Page 22 Page 18 Page 23 Page 18 Page 23 Page 27 Page 43 Page 24 Page 24
  • Sharp PN-U423 | Operation Manual - Page 43
    obtain an address automatically, change this setting to ON. To set the address manually, set this to OFF. IP ADDRESS If the DHCP CLIENT is set to Specify the time (in minutes) to elapse before automatically disconnecting this monitor from the network. Specify in minutes from 1 to 65535. A value
  • Sharp PN-U423 | Operation Manual - Page 44
    other appropriate applications. In order to use this function, enable a connection to the monitor through Internet Explorer. Read the manual for the terminal software for detailed instructions. (1) Connect the PC to the monitor. 1. Specify the IP address and data port number and connect the PC to
  • Sharp PN-U423 | Operation Manual - Page 45
    If you are experiencing any problem with your display, before calling for service, please review the following troubleshooting tips. There is no picture or sound. • Is the power cord disconnected? (See page 13.) • Is the main power switch off? (See page 16.) • Is the monitor in standby mode (the
  • Sharp PN-U423 | Operation Manual - Page 46
    Troubleshooting The Power LED is flashing in red and green alternately. • When the internal temperature of the monitor rises excessively, the brightness of the backlight decreases automatically in order to prevent high-temperature-related problems. When this occurs, the Power LED flashes red and
  • Sharp PN-U423 | Operation Manual - Page 47
    Specifications nProduct Specifications Model PN-U553 PN-U473 PN-U423 LCD component 55" Class [54-5/8 inch 47" Class [46-15/16 ( *2 Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such cases, please check the temperature
  • Sharp PN-U423 | Operation Manual - Page 48
    Specifications nDimensional Drawings Note that the values shown are approximate values. [PN-U553] 1 49-3/16 [1250] [26] Opening width (47-11/16 [1212]) VESA holes * 7-7/8 [200] 7-7/8 [200] Unit: inch [mm] Opening height (26-7/8 [683]) 7-7/8 [200] 28-3/8 [721] 2-1/4 [57] [PN-U473] 1-1/16
  • Sharp PN-U423 | Operation Manual - Page 49
    ON Display Active OFF No display Power consumption* 130 W 130 W 115 W 4.5 W 4.5 W 4.5 W * Values of the PN-U553, PN-U473, and PN-U423 in that order from the top. nDDC (plug and play) The monitor supports the VESA DDC (Display Data Channel) standard. DDC is a signal standard for plug and play
  • Sharp PN-U423 | Operation Manual - Page 50
    Specifications nCompatible signal timing (PC) Screen resolution VESA 640 × 480 800 × 600 848 × 480 1024 × 768 Wide US TEXT 9kHz 48.1kHz 46.9kHz 31.0kHz 48.4kHz 56.5kHz 60.0kHz 67.5kHz 47.8kHz 60.3kHz 49.7kHz 60.0kHz 64.0kHz 80.0kHz 47.7kHz 65.3kHz 55.9kHz 75.0kHz 65.3kHz 74.0kHz 44.7kHz 66.
  • Sharp PN-U423 | Operation Manual - Page 51
    nDVI-D input terminal pins (DVI-D 24 pin) Specifications nHDMI input terminal pins (HDMITM Connector) No. Function 1 TMDS data 2- 2 TMDS data 2+ 3 TMDS data 2/4 shield 4 N.C. 5 N.C. 6 DDC clock 7 DDC data 8 N.C. 9 TMDS data 1- 10 TMDS data 1+ 11
  • Sharp PN-U423 | Operation Manual - Page 52
    Specifications nDVI-D output terminal pins (DVI-D 24 pin) nRS-232C output terminal pins (D-sub 9 pin) No. Function 1 TMDS data 2- 2 TMDS data 2+ 3 TMDS data 2/4 shield 4 N.C. 5 N.C. 6 DDC clock 7
  • Sharp PN-U423 | Operation Manual - Page 53
    Mounting Precautions (For SHARP dealers and service engineers) • When installing, removing or moving the monitor, ensure that this is carried out by at least 2 people. • Be sure to use a wall-mount bracket designed or designated for mounting the monitor. • This monitor is designed to be installed
  • Sharp PN-U423 | Operation Manual - Page 54
    PN-U553U473U423 Mu EN13G(1)
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
PN-U553
PN-U473
PN-U423
LCD MONITOR
OPERATION MANUAL