Sharp PN-V601 PN-V601 Operation Manual
Sharp PN-V601 Manual
 |
UPC - 074000047068
View all Sharp PN-V601 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp PN-V601 manual content summary:
- Sharp PN-V601 | PN-V601 Operation Manual - Page 1
PN-V601 LCD MONITOR OPERATION GUIDE - Sharp PN-V601 | PN-V601 Operation Manual - Page 2
procedure 17 Setting of the GAMMA user data 20 RS-232C command table 21 Controlling the Monitor with a PC (LAN 28 Settings to connect to a LAN 28 Controlling with a PC 30 Troubleshooting 36 Specifications 37 This guide contains instructions regarding operation, settings, and similar details - Sharp PN-V601 | PN-V601 Operation Manual - Page 3
When the PN-ZB02 (optional) is attached 25. PC/AV DVI-D input terminal 26. PC/AV DVI-D output terminal 27. LAN terminal 28. External speaker terminals 29. Audio 1 input terminals 30. Audio 2 input terminals 31. PC RGB input terminals 32. AV component input terminals 33. AV video input terminal 34 - Sharp PN-V601 | PN-V601 Operation Manual - Page 4
nRemote control unit (Supplied with the PN-ZR01 (optional)) 1 2 8 3 9 4 5 10 11 6 12 7 1. Signal transmitter 2. POWER button 3. MUTE button 4. VOL +/Cursor control ( ) button 5. BRIGHT -/Cursor control ( ) button 6. DISPLAY button 7. MODE button 8. INPUT button 9. MENU button 10. BRIGHT - Sharp PN-V601 | PN-V601 Operation Manual - Page 5
specifically noted. 1. INPUT (Input mode selection) The menu is displayed. Press or mode, and press to enter. to select the input Input mode PC D-SUB PC HDMI AV HDMI Video PC D-sub input terminal PC/AV HDMI input terminal*1 PC/AV HDMI input terminal*1 Audio Audio input terminal *2 When the PN - Sharp PN-V601 | PN-V601 Operation Manual - Page 6
Displays the dots of the input signals as the corresponding dots on the screen. TIPS • Using this monitor's screen-size switching or dual-screen display mode. • When dual-screen display is selected, the screen size cannot be changed. • The appearance of the original video may change if you select a - Sharp PN-V601 | PN-V601 Operation Manual - Page 7
ITEM, and press or to select to perform this action or not. OFF For all monitors, only power, input mode selection, and product information display operations will be recognized. ON For all monitors, all operations will be recognized. After returning to the normal screen with procedure 3, when - Sharp PN-V601 | PN-V601 Operation Manual - Page 8
selected (highlighted) 4 Screen resolution of input signal, and other data. TIPS • Items that cannot be selected appear in gray. (e.g. Function not supported by the current input signal) nMenu Items The displayed menu items vary depending on whether or not the PN-ZB02 (optional) is attached - Sharp PN-V601 | PN-V601 Operation Manual - Page 9
entire brightness of the video signals. TINT Adjusts the hue. Selecting + changes the color towards green, and selecting - changes it towards magenta. COLORS Adjusts the color intensity. SHARPNESS Adjusts the sharpness of the image. ADVANCED (AV input) You can adjust more specifically. (See page 15 - Sharp PN-V601 | PN-V601 Operation Manual - Page 10
. POWER ON DELAY You can delay the screen display after the monitor is turned on. The period can be set up to 60 seconds in units of one second. When this the video signal input from the AV HDMI input terminal. HDMI RGB INPUT RANGE Sets the type of HDMI signals when using the AV HDMI input mode. - Sharp PN-V601 | PN-V601 Operation Manual - Page 11
scan display POWER MANAGEMENT POWER MANAGEMENT determines whether or not to switch modes from no signal to the input signal standby mode. COLOR SYSTEM (AV S-VIDEO/AV VIDEO) Select the color system of the AV equipment which is connected to AV S-video and AV video input terminal. (AUTO / PAL / PAL-60 - Sharp PN-V601 | PN-V601 Operation Manual - Page 12
the position of the sub screen in PbyP2 mode. AUTO OFF Sets the display method when no signals for the sub screen are input in PIP, PbyP, or PbyP2 mode. MANUAL....... Displays a main screen and a black sub screen. AUTO Displays the main screen as a full screen. TIPS • When WHITE BALANCE is set to - Sharp PN-V601 | PN-V601 Operation Manual - Page 13
direction: 2 monitors nZOOM2 SPECIAL SETTING If you connect a laptop computer with any of the following screen resolutions and black bands appear around the screen, set ZOOM2 SPECIAL SETTING of INPUT SIGNAL on the OPTION menu to ON and then select ZOOM2 in the SIZE setting. This displays the area - Sharp PN-V601 | PN-V601 Operation Manual - Page 14
cannot be set. 1366x768 V: 60 Hz H: 47.7 kHz OK...[MENU monitor on at the specified time. OFF : Switches the monitor off at the specified time and puts the monitor INPUT Specifies the input mode at power-on. When not specifying, the screen at the previous power-off appears. Input modes displayed - Sharp PN-V601 | PN-V601 Operation Manual - Page 15
digital compression. 3D-Y/C (AV VIDEO) Specify whether to perform 3-dimension or manually. display mode on the computer you are using is 65,000 colors, the color levels in the color pattern may appear differently or grayscale may appear to be colored. (This is due to the specifications of the input - Sharp PN-V601 | PN-V601 Operation Manual - Page 16
NETWORK, MAIL, SERVICE & SUPPORT, and SNMP (See page 10, and pages 32 to 35.) ADJUSTMENT LOCK You can disable operations on the monitor and the remote when the PN-ZB02 (optional) is attached) Specifies whether to allow control via RS-232C or LAN (see pages 17 and 28). OSD DISPLAY Hides/shows - Sharp PN-V601 | PN-V601 Operation Manual - Page 17
monitor (see page 18), you can make input mode selection/adjustment or can check the status of a specific monitor. Precautions when the PN-ZB02 (optional) is attached • To control the monitor : VOLM 30 When inputting a negative value, specify a numerical value in three digits. Example: AUTR-009 - Sharp PN-V601 | PN-V601 Operation Manual - Page 18
in the "One-to-one connection with a PC" section. nID numbers You can assign a unique ID number to each monitor (see page 10). This allows you to control a particular monitor in a daisy chain of monitors. You can assign ID numbers either from the menu screen (using the remote control) or from the PC - Sharp PN-V601 | PN-V601 Operation Manual - Page 19
: (After executing IDLK0002) IDCK0000 ← (Parameter has no meaning.) Returned response. The ID ID : 001 IDLK : 002 ← number is also displayed on the monitor screen. IDCK000 + ← Repeater control. (If a command is used with repeater control, ID WAIT designation using IDSL or IDLK ID : 001 - Sharp PN-V601 | PN-V601 Operation Manual - Page 20
command. The value to be returned is not the value stored in the monitor, but the value in the temporary memory for display. (These values are the same when the user data save command (UGSV) above has been sent.) TIPS • The user data is not initialized by RESET of the PICTURE menu. To initialize - Sharp PN-V601 | PN-V601 Operation Manual - Page 21
AV HDMI is selected for HDMI of INPUT SELECT. 1 PC DVI-D ○○ 2 PC D-SUB 3 AV COMPONENT 4 AV VIDEO 6 PC RGB 7 AV DVI-D ●○○ 8 AV S-VIDEO 9 AV HDMI 10 PC HDMI SCREEN menu Auto CLOCK Function Command Direction ASNC W CLCK WR PHASE positioning size RESOLUTION RESET PHSE WR Position of HPOS - Sharp PN-V601 | PN-V601 Operation Manual - Page 22
/Response contents When the input mode is PC D-SUB, PC RGB. 0-60 0-127 on PC D-SUB, PC RGB. 0-60 0-127 on PC D-SUB, PC RGB. 0-60 0-60 0-24 0-2 0: OFF, 1: LOW, 2: HIGH 0-2 0: OFF, 1: LOW, 2: HIGH 0-1 0: OFF, 1: ON 0-1 0: OFF, 1: ON (When the input mode is AV VIDEO) -10-10 R Y G C B M Resets the - Sharp PN-V601 | PN-V601 Operation Manual - Page 23
subsequent commands after this command. Clears the ID number if one has been designated. Displays monitor's own ID number and the selected ID number on the screen. 0: 9600bps, 1: 19200bps, 2: 38400bps 0: OFF, 1: ON, 2: ON: DISPLAY 0-99 0-99 ○○○ 0-30 1-100 0-30 1-100 ○○○ 1-31 1-31 23 - Sharp PN-V601 | PN-V601 Operation Manual - Page 24
the Monitor with a PC (RS-232C) OPTION menu Function Date/time setting SCHEDULE INPUT SELECT AUDIO SELECT DVI BNC HDMI PC DVI-D PC D-SUB PC HDMI PC RGB AV DVI-D AV HDMI INPUT RESOLUTION (PC) AV COMPONENT AV S-VIDEO AV VIDEO RESOLUTION CHECK PIXEL SETTING (PC D-SUB, PC RGB) INPUT RESOLUTION - Sharp PN-V601 | PN-V601 Operation Manual - Page 25
contents 0-1 0: OFF, 1: ON 0-4 0: OFF, 1: 2 x 2, 2: 3 x 3, 3: 4 x 4, 4: 5 x 5 11-55 1 x 1 (OFF) to 5 x 5 ("m x n" is expressed as "mn", where m and n are the numbers of monitors specified for the longest direction and the shortest direction respectively.) 11-55 Specifies values in the order of - Sharp PN-V601 | PN-V601 Operation Manual - Page 26
Controlling the Monitor with a PC (RS-232C) PIP/PbyP menu Function VIDEO 9 AV HDMI 10 PC HDMI 1-2 1: MAIN, 2: SUB 0-1 0: POS1, 1: POS2 0-2 0: POS1, 1: POS2, 2: POS3 0-1 0: MANUAL, 1: AUTO Initialization/Functional Restriction Setting (FUNCTION) menu Function ALL RESET ADJUSTMENT LOCK OSD DISPLAY - Sharp PN-V601 | PN-V601 Operation Manual - Page 27
cc: 00-FF 1-16 xxxx ··· xxxx 1-16 (xxxx: 32 pieces) 1-16 xxxx: 0000-1023 0 0 aa: Block number xxxx: 32 pieces of user data cc: Checksum (ASCII data) of the block number and user data xxxx: User data of 32 pieces Initialize the user data. Save the user data in the monitor. *2 *1 (A) (B) ○○○ 27 E - Sharp PN-V601 | PN-V601 Operation Manual - Page 28
PN-ZB02 (optional) is attached, your monitor can be connected to a LAN allowing you to control it from a PC on the LAN. You can also configure the monitor to send e-mail notification when it has a problem change this setting to ON. To set the address manually, set this to OFF. IP ADDRESS If the DHCP - Sharp PN-V601 | PN-V601 Operation Manual - Page 29
the power ON to the monitor. 2. Set RS-232C/LAN SELECT on the SETUP menu to LAN. PC operation 3. Launch Internet Explorer, in the "Address" box type "http://192.168.150.2/" and press the Enter key. You will be prompted to enter a user name and password. 4. Leave the user name and password boxes - Sharp PN-V601 | PN-V601 Operation Manual - Page 30
for details on each setting. • If you click [Refresh] before the screen finishes updating the current display, the "Server Busy Error" will appear. Wait for a moment before operating your monitor again. • You cannot operate the monitor while it is warming up. • If "DHCP CLIENT" is set to "ON", press - Sharp PN-V601 | PN-V601 Operation Manual - Page 31
LAN) ■ ADJUSTMENT You can adjust these settings which are also available on the monitor's menu. • SCREEN (See page 9.) • PICTURE (See Page 9.) • CONTROL You can control the operations corresponding to the buttons (POWER INPUT SIZE ) on the remote control unit. (See page 5.) TIPS • In standby - Sharp PN-V601 | PN-V601 Operation Manual - Page 32
to "ON". To set the address manually, set this to "OFF". IP monitor. After entering a user name and password, click [Apply]. ACCEPT IP ADDRESS You can limit access to this monitor by registering IP addresses of PCs that should have access. To limit access, specify the option "From only specific - Sharp PN-V601 | PN-V601 Operation Manual - Page 33
a value from 1025 to 65535. INSTALLATION INFORMATION (NAME/LOCATION) Specify the information to display for this monitor in the Internet Explorer window. TIPS • The MONITOR NAME can be up to 16 alphanumeric characters or symbols. • Enter up to 50 characters in the NAME field in the INSTALLATION - Sharp PN-V601 | PN-V601 Operation Manual - Page 34
a PC (LAN) ■ MAIL (RECIPIENT) This screen allows you to specify the recipients of the e-mail sent periodically or when the monitor has an error. ■ MAIL (PERIODICAL) When PERIODICAL for CONDITION of MAIL (RECIPIENT) is checked, set the date and time to send the mail. RECIPIENT E-MAIL - Sharp PN-V601 | PN-V601 Operation Manual - Page 35
letters and symbols can be used for the community name, user name and password. ■ SERVICE & SUPPORT (URL INFORMATION) You can display a specific URL in the URL INFORMATION field on the INFORMATION screen when an error occurs in the monitor. (See page 31.) SNMP SETTING Set whether to enable or - Sharp PN-V601 | PN-V601 Operation Manual - Page 36
problem with your display, before calling for service, please review the following troubleshooting tips. There is no picture or sound. • Is the power cord disconnected? • Is the main power switch off? • Is the monitor in standby mode (the power LED illuminating in orange)? • Make sure correct input - Sharp PN-V601 | PN-V601 Operation Manual - Page 37
Specifications nPN-V601 Product Specifications Model PN-V601 LCD component 60" Class [60 inch (152.4cm) diagonal] TFT LCD Max. resolution (pixels) 1366 x 768 Max. colors Approx. 16.77 M colors Pixel pitch 0.973 mm (H) × 0.973 mm (V) Viewing angle 176° right/left/up/down (contrast ratio - Sharp PN-V601 | PN-V601 Operation Manual - Page 38
PN-ZR01 (optional), or PN-ZB02 (optional) is not connected. *2 When AUTO INPUT CHANGE is set to OFF. DMPM: Digital Monitor Power Management DMPM Monitor ON Active OFF Screen Display No display Power consumption*1 480 W 1.6 W*2 nDDC (plug and play) The monitor supports the VESA DDC (Display - Sharp PN-V601 | PN-V601 Operation Manual - Page 39
Specifications nCompatible signal timing (PC) Screen resolution VESA 640 × 480 Hsync 31.5kHz 37.9kHz Vsync 60Hz 72Hz Dot frequency 25.175MHz 31.5MHz Digital DVI*2 HDMI Yes Yes Yes Yes Analog (D-SUB/RGB*2) Yes Yes 37.5kHz 75Hz 31.5MHz Yes 800 × 600 35.1kHz 56Hz 36.0MHz - 37. - Sharp PN-V601 | PN-V601 Operation Manual - Page 40
Specifications nCompatible signal timing (AV) Screen resolution 1920 × 1080p*1 1920 × 1080i*1 1280 × 720p 720 × 576p 720 × 480p 640 × 480p(VGA) Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes *1 Displays a reduced image, except in Dot by Dot. In Dot by Dot, the image will be cut down - Sharp PN-V601 | PN-V601 Operation Manual - Page 41
(DVI-D 24 pin) Specifications nPC/AV HDMI input terminal pins (HDMITM Connector video signal input 9 +5V 2 Green video signal input 10 GND 3 Blue video signal input 11 N.C. 4 N.C. 12 DDC data 5 GND 13 Hsync signal input 6 GND for red video signal 14 Vsync signal input 7 GND for green video - Sharp PN-V601 | PN-V601 Operation Manual - Page 42
PN-V601 G EN10G(1)
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
 |
 |
PN-V601
LCD MONITOR
OPERATION GUIDE