Sharp PN-V601A Operation Manual

Sharp PN-V601A Manual

Get Sharp PN-V601A PDF manuals and user guides View all Sharp PN-V601A manuals
Add to My Manuals
Save this manual to your list of manuals

Sharp PN-V601A manual content summary:

  • Sharp PN-V601A | Operation Manual - Page 1
    PN-V601A LCD MONITOR OPERATION MANUAL
  • Sharp PN-V601A | Operation Manual - Page 2
    28 Controlling with a PC 30 Troubleshooting 36 Specifications 37 This guide contains instructions regarding operation, settings, and similar details. For instructions regarding connection and installation, refer to the included Operation Manual. Manual Scope - Microsoft, Windows and Internet
  • Sharp PN-V601A | Operation Manual - Page 3
    24 When the PN-ZB02 (optional) is attached 25 26 27 28 29 30 31 3334 32 9 8 76 54 32 Caution • Consult your SHARP dealer for attachment/detachment that future expanded functionality will be provided. 24. Control kit terminal When the PN-ZB02 (optional) is attached 25. PC/AV DVI-D input terminal 26.
  • Sharp PN-V601A | Operation Manual - Page 4
    Part Names nRemote control unit (Supplied with the PN-ZR01 (optional)) 1 2 8 3 9 4 5 10 11 6 12 7 1. Signal transmitter 2. POWER button ) button 12. SIZE button nRemote control sensor box (Supplied with the PN-ZR01 (optional)) 1 2 4 1. Brightness sensor 2. Remote control sensor 3.
  • Sharp PN-V601A | Operation Manual - Page 5
    the same functions. Rear side buttons Remote control unit buttons This manual assumes that this product will be used with the remote control unit terminal*1 PC/AV HDMI input terminal*1 Audio Audio input terminal *2 When the PN-ZB02 (optional) is attached Input mode PC DVI-D PC HDMI Video PC/AV
  • Sharp PN-V601A | Operation Manual - Page 6
    Basic Operation nSwitching the screen size Even when the screen size is changed, the display may remain the same depending on the input signal. WIDE PC input Displays image so it fills the entire screen. ZOOM 1 AV input PC input AV input An image with a 4:3 aspect ratio is stretched to fill
  • Sharp PN-V601A | Operation Manual - Page 7
    Remote Control Mode With the remote control unit it's possible to perform operation of... • The primary monitor • Monitors with a specified ID No. • All primary/secondary monitors It's necessary to specify which type of operation will be performed in advance. 1. If using the remote control unit,
  • Sharp PN-V601A | Operation Manual - Page 8
    BLACK LEVEL 84 OPTION TINT 30 MULTI COLORS 30 PIP/PbyP SHARPNESS 12 1366x768 V: 60 Hz H: 47.7 kHz PC D-SUB OK···[MENU] For items (e.g. Function not supported by the current input signal) nMenu Items The displayed menu items vary depending on whether or not the PN-ZB02 (optional)
  • Sharp PN-V601A | Operation Manual - Page 9
    . TINT Adjusts the hue. Selecting + changes the color towards green, and selecting - changes it towards magenta. COLORS Adjusts the color intensity. SHARPNESS Adjusts the sharpness of the image. ADVANCED (AV input) You can adjust more specifically. (See page 15.) COLOR MODE Changes the color mode on
  • Sharp PN-V601A | Operation Manual - Page 10
    the menu screen. POWER ON DELAY You can delay the screen display after the monitor is turned on. The period can be set up to 60 seconds in units of one second. When this function is activated, the power LED flashes (at approx. 1 second interval) in orange. This function is disabled
  • Sharp PN-V601A | Operation Manual - Page 11
    video and AV video input terminal. (AUTO / PAL / PAL-60 / SECAM / NTSC3.58 / NTSC4.43) When AUTO is possible. In this case select OFF. (Perform manual adjustment of the screen.) AUTO INPUT CHANGE follows: PC D-SUB, PC HDMI and AV HDMI When the PN-ZB02 (optional) is attached: PC DVI-D, PC HDMI, PC
  • Sharp PN-V601A | Operation Manual - Page 12
    screen in PbyP2 mode. AUTO OFF Sets the display method when no signals for the sub screen are input in PIP, PbyP, or PbyP2 mode. MANUAL....... Displays a main screen and a black sub screen. AUTO Displays the main screen as a full screen. TIPS • When WHITE BALANCE is set to THRU, BLACK LEVEL
  • Sharp PN-V601A | Operation Manual - Page 13
    Menu Items nEnlarge • You can align several monitors and integrate them into a single large screen to display. • Up to five monitors can be aligned in both the horizontal and vertical directions. • Each monitor displays enlarged views of separated images. (Example) Horizontal direction: 2 monitors
  • Sharp PN-V601A | Operation Manual - Page 14
    time are specified. • Check regularly that the set date and time are correct. • When STANDBY MODE is LOW POWER, SCHEDULE cannot be set. 1366x768 V: 60 Hz H: 47.7 kHz OK...[MENU] TIPS • Up to 8 SCHEDULE items can be registered. • Setting the SCHEDULE flashes the power LED alternately in red and
  • Sharp PN-V601A | Operation Manual - Page 15
    In Windows XP, open [CD Drive] in [My Computer]. 3. Double-click [Adj_uty.exe]. The adjustment pattern will appear. Adjust the screen automatically or manually. 4. When adjustment is finished, press the [Esc] on the computer's keyboard to quit the adjustment program. 5. Eject the CD-ROM from the CD
  • Sharp PN-V601A | Operation Manual - Page 16
    SETUP, RS-232C/LAN SELECT, ID No. SET, BAUD RATE, NETWORK, MAIL, SERVICE & SUPPORT, and SNMP (See page 10, and pages 32 to 35.) ADJUSTMENT LOCK You MODE (not even power on/off). RS-232C (RS-232C/LAN when the PN-ZB02 (optional) is attached) Specifies whether to allow control via RS-232C or
  • Sharp PN-V601A | Operation Manual - Page 17
    numbers to each monitor (see page 18), you can make input mode selection/adjustment or can check the status of a specific monitor. Precautions when the PN-ZB02 (optional) is attached • To control the monitor via RS-232C, set RS-232C/LAN SELECT to RS-232C. • You cannot use RS-232C and
  • Sharp PN-V601A | Operation Manual - Page 18
    Controlling the Monitor with a PC (RS-232C) nResponse code format When a command has been executed correctly O K Return code (0DH, 0AH) A response is returned after a command is executed. * If an ID number has been assigned Space (20H) Return code (0DH, 0AH) O K SPC 0 0 1 ID number of
  • Sharp PN-V601A | Operation Manual - Page 19
    Controlling the Monitor with a PC (RS-232C) nCommands for ID control The command examples shown on this page assume the following connection and ID number set up. ID number: 1 ID number: 2 ID number: 3 ID number: 4 IDST A monitor receiving this command sets its own ID number in the parameter
  • Sharp PN-V601A | Operation Manual - Page 20
    Controlling the Monitor with a PC (RS-232C) nRepeater control This system has a function to allow setting of multiple monitors connected in a daisy chain using a single command. This function is called repeater control. You can use Repeater control function without assigning ID numbers. [Example]
  • Sharp PN-V601A | Operation Manual - Page 21
    indicates a command which cannot be used in power standby mode regardless of the STANDBY MODE setting. *2: PN-ZB02 (optional) limitations (A) When PN-ZB02 (optional) is not attached, (B) When PN-ZB02 (optional) is attached. ○ : The command can be used. - : Error (ERR) Power control/Input mode
  • Sharp PN-V601A | Operation Manual - Page 22
    RS-232C) PICTURE menu Function Auto CONTRAST BLACK LEVEL TINT COLORS SHARPNESS ADVANCED (When the input mode is AV.) FLESH TONE 3D CMSM CRST W CMVR WR CMVY CMVG CMVC CMVB CMVM CRST W BMOD WR CTMP WR Parameter 1 0-60 0-60 0-60 0-60 0-24 0-2 0-2 0-1 0-1 -10-10 1 -10-10 2 -10-10 3 0 2 3
  • Sharp PN-V601A | Operation Manual - Page 23
    to the PN-ZR01 only) WHEN DARK: AMBIENT BRIGHTNESS WHEN DARK: SCREEN BRIGHTNESS WHEN LIGHT: AMBIENT BRIGHTNESS WHEN LIGHT: SCREEN BRIGHTNESS IDCK W BAUD WR OPTS WR OPSD WR OPDD WR OPSL WR OPDL WR Parameter 0-100 0-100 0-4 0-20 10-990 5-20 0-1 14 1 2 3 4 5 6 0 1-60 0-1 0-1 0-1 0-2 Reply
  • Sharp PN-V601A | Operation Manual - Page 24
    (AV) COLOR SYSTEM AUDIO OUTPUT(RCA) AUDIO OUTPUT(RCA) When the PN-ZB02 (optional) is attached AUDIO LEVEL(STEREO MINI) SELF ADJUST AUTO OFF, 1: ON ○ 0-1 0-1 0: OFF, 1: ON ○ 0-5 0-5 0: AUTO, 1: PAL, 2: PAL-60, 3: SECAM, 4: NTSC3.58, 5: NTSC4.43 ○-○ 0-1 0-1 0: VARIABLE, 1: FIXED ○○ - 0-2
  • Sharp PN-V601A | Operation Manual - Page 25
    Controlling the Monitor with a PC (RS-232C) MULTI menu Function ENLARGE ENLARGE MODE Command Direction ENLG WR EMAG WR EMHV WR Parameter 0-1 0-4 11-55 IMAGE POSITION (M x N) EPHV WR IMAGE POSITION (2 x 2) EPOS WR IMAGE POSITION (3 x 3) EPOS WR IMAGE POSITION (4 x 4) EPOS WR IMAGE
  • Sharp PN-V601A | Operation Manual - Page 26
    VIDEO 6 PC RGB 7 AV DVI-D 8 AV S-VIDEO 9 AV HDMI 10 PC HDMI 1-2 1: MAIN, 2: SUB 0-1 0: POS1, 1: POS2 0-2 0: POS1, 1: POS2, 2: POS3 0-1 0: MANUAL, 1: AUTO Initialization/Functional Restriction Setting (FUNCTION) menu Function ALL RESET ADJUSTMENT LOCK OSD DISPLAY LED TEMPERATURE ALERT STATUS ALERT
  • Sharp PN-V601A | Operation Manual - Page 27
    Controlling the Monitor with a PC (RS-232C) Others Function SCREEN SIZE (PC) SCREEN SIZE (AV) VOLUME MUTE INFORMATION MODEL SERIAL NO BRIGHT TEMPERATURE SENSOR Command Direction WIDE WR WIDE WR VOLM WR MUTE WR INF1 R SRNO R VLMP WR DSTA R Parameter 1-5 1-5 0-31 0-1 0-31
  • Sharp PN-V601A | Operation Manual - Page 28
    PN-ZB02 (optional) is attached, your monitor can be connected to a LAN allowing you to control it from a PC on the LAN. You can also configure the monitor to send e-mail notification when it has a problem change this setting to ON. To set the address manually, set this to OFF. IP ADDRESS If the DHCP
  • Sharp PN-V601A | Operation Manual - Page 29
    Controlling the Monitor with a PC (LAN) ■ To set from a PC When the monitor is connected to a PC, LAN settings can be configured via PC. Set up process (1) Connect your monitor to a PC (2) Specify the PC's IP address (3) Configure the monitor's LAN settings (1) Connecting your monitor to a PC
  • Sharp PN-V601A | Operation Manual - Page 30
    . DHCP CLIENT If your LAN has a DHCP server and you wish to obtain an address automatically, change this setting to "ON". To set the address manually, set this to "OFF". IP ADDRESS If the DHCP CLIENT is set to "OFF", specify an IP address. SUBNET MASK If the DHCP CLIENT is
  • Sharp PN-V601A | Operation Manual - Page 31
    ■ INFORMATION Information about this monitor appears. Controlling the Monitor with a PC (LAN) ■ ADJUSTMENT You can adjust these settings which are also available on the monitor's menu. • SCREEN (See page 9.) • PICTURE (See Page 9.) • PICTURE (ADVANCED) (See Page 15.) • AUDIO (See page 10.) • SETUP
  • Sharp PN-V601A | Operation Manual - Page 32
    . DHCP CLIENT If your LAN has a DHCP server and you wish to obtain an address automatically, change this setting to "ON". To set the address manually, set this to "OFF". IP ADDRESS If the DHCP CLIENT is set to "OFF", specify an IP address. SUBNET MASK If the DHCP CLIENT is
  • Sharp PN-V601A | Operation Manual - Page 33
    ■ NETWORK (GENERAL) This screen allows you to specify the general LAN settings. Controlling the Monitor with a PC (LAN) ■ MAIL (ORIGINATOR) This screen allows you to configure the e-mail sent periodically or when the monitor has an error. The settings depend on the configuration of your LAN. Ask
  • Sharp PN-V601A | Operation Manual - Page 34
    Controlling the Monitor with a PC (LAN) ■ MAIL (RECIPIENT) This screen allows you to specify the recipients of the e-mail sent periodically or when the monitor has an error. ■ MAIL (PERIODICAL) When PERIODICAL for CONDITION of MAIL (RECIPIENT) is checked, set the date and time to send the mail.
  • Sharp PN-V601A | Operation Manual - Page 35
    SNMP is usable. (About 2 minutes) • Up to 16 alphanumeric letters and symbols can be used for the community name, user name and password. ■ SERVICE & SUPPORT (URL INFORMATION) You can display a specific URL in the URL INFORMATION field on the INFORMATION screen when an error occurs in the monitor
  • Sharp PN-V601A | Operation Manual - Page 36
    problem with your display, before calling for service, please review the following troubleshooting aligned? (See Operation manual.) • Are the batteries (See page 16.) • Is the PN-ZR01 remote control sensor box disconnected? has a problem. Turn off the monitor and request repair from your SHARP dealer.
  • Sharp PN-V601A | Operation Manual - Page 37
    Specifications nPN-V601A Product Specifications Model PN-V601A LCD component 60" Class [60 inch (152.4cm) diagonal] TFT LCD Max. *2 Does not support plug and play. *3 Temperature condition may change when using the display together with the optional equipments recommended by SHARP. In such
  • Sharp PN-V601A | Operation Manual - Page 38
    mounting method. SHARP recommends using M6 PN-ZB02 (optional) is not connected. *2 When AUTO INPUT CHANGE is set to OFF. DMPM: Digital Monitor Power Management DMPM Monitor ON Active OFF Screen Display No display Power consumption*1 480 W 1.6 W*2 nDDC (plug and play) The monitor supports
  • Sharp PN-V601A | Operation Manual - Page 39
    79.5MHz Yes 1280 × 800*1 1280 × 960*1 1280 × 1024*1 60.3kHz 49.7kHz 60.0kHz 64.0kHz 75Hz 102.25MHz Yes 60Hz 83.5MHz Yes 60Hz 108 the image will be cut down to panel size then displayed. *2 Available when the PN-ZB02 (optional) is attached. * All are compliant only with non-interlaced. *
  • Sharp PN-V601A | Operation Manual - Page 40
    a reduced image, except in Dot by Dot. In Dot by Dot, the image will be cut down to panel size then displayed. *2 Available when the PN-ZB02 (optional) is attached. E 40
  • Sharp PN-V601A | Operation Manual - Page 41
    nPC/AV DVI-D input terminal pins (DVI-D 24 pin) Specifications nPC/AV HDMI input terminal pins (HDMITM Connector) No. Function 1 TMDS data 2- 2 TMDS data 2+ 3 TMDS data 2/4 shield 4 N.C. 5 N.C. 6 DDC clock 7 DDC data 8 N.C. 9 TMDS data 1- 10 TMDS data 1+ 11 TMDS data 1/3 shield 12
  • Sharp PN-V601A | Operation Manual - Page 42
    PN-V601A G EN13J(1)
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
PN-V601A
LCD MONITOR
OPERATION
MANUAL