Sharp PN-Y325 Operation Manual

Sharp PN-Y325 Manual

Get Sharp PN-Y325 PDF manuals and user guides View all Sharp PN-Y325 manuals
Add to My Manuals
Save this manual to your list of manuals

Sharp PN-Y325 manual content summary:

  • Sharp PN-Y325 | Operation Manual - Page 1
    PN-Y325 LCD MONITOR OPERATION MANUAL
  • Sharp PN-Y325 | Operation Manual - Page 2
    IMPORTANT: To aid reporting in case of loss or theft, please record the product's model and serial numbers in the space provided. The numbers are located in the rear of the product. Model No.: Serial No.: U.S.A. ONLY
  • Sharp PN-Y325 | Operation Manual - Page 3
    user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: FCC Regulations and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of
  • Sharp PN-Y325 | Operation Manual - Page 4
    SHARP LCD product. To ensure safety and many years of trouble service life of your LCD product, please read the following precautions carefully before using the product. 1. Read instructions - All operating instructions must be read and understood before the product is operated. 2. Keep this manual
  • Sharp PN-Y325 | Operation Manual - Page 5
    spoil your clothing. In order to avoid these problems, make sure to observe the precautions below: • sides of the batteries according to the instructions in the compartment. • Do not mix support. • Not standing the monitors on cloth or other materials placed between the monitor and supporting
  • Sharp PN-Y325 | Operation Manual - Page 6
    Install in accordance with the manufacturer's instructions. 8) Do not install near any manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
  • Sharp PN-Y325 | Operation Manual - Page 7
    SAFETY INSTRUCTIONS - of the inside of the monitor from an authorized SHARP servicing dealer or service center. - Images cannot be rotated on this if it is broken or malfunctioning. Refer the servicing to the service representative. Manual Scope - Microsoft, Windows and Internet Explorer are
  • Sharp PN-Y325 | Operation Manual - Page 8
    wall requires special expertise and the work must be performed by an authorized SHARP dealer. You should never attempt to perform any of this work yourself a housing, or if the ambient temperature may be outside of the range of 32°F (0°C) to 104°F (40°C), install a fan or take other measures to keep
  • Sharp PN-Y325 | Operation Manual - Page 9
    32 PC connection 32 Communication conditions 32 Communication procedure 32 RS-232C command table 36 Controlling the Monitor with a PC (LAN 38 Settings to connect to a LAN 38 Command-based control 39 Troubleshooting 40 Specifications 42 Mounting Precautions (For SHARP dealers and service
  • Sharp PN-Y325 | Operation Manual - Page 10
    -theft hole ( ) A commercially available anti-theft lock can be connected. The anti-theft hole is compatible with the Kensington MicroSaver Security System. Caution • Consult your SHARP dealer for attachment/detachment of optional parts. E 10
  • Sharp PN-Y325 | Operation Manual - Page 11
    nRemote control unit 1 2 7 3 8 4 9 10 5 11 6 Part Names 1. Signal transmitter 2. POWER button (See page 17.) 3. MUTE button (See page 19.) 4. VOL +/- buttons (See page 19.) BRIGHT +/- buttons (See page 19.) Cursor control ( / / / ) buttons 5. DISPLAY/Red button (See page 19.) 6. MODE/
  • Sharp PN-Y325 | Operation Manual - Page 12
    connecting/ disconnecting cables. Also, read the manual of the equipment to be connected. terminals may cause malfunctions and the other problems. • Do not use any cable "db.info" in the root folder. Supported USB flash drives File System FAT32 Capacity Up to 32 GB (maximum file size 2 GB)
  • Sharp PN-Y325 | Operation Manual - Page 13
    device. • Outputting HDCP-encrypted video requires an external device which supports HDCP. • This terminal allows the daisy chain connection of up available RS-232 straight cable between these terminals and the PC. • PN-Y325 monitors can be connected together in a daisy chain connection. 11.
  • Sharp PN-Y325 | Operation Manual - Page 14
    Connecting the Power Cord Caution • Use only the power cord supplied with the monitor. 1. Turn off the main power switch. 2. Plug the power cord (supplied) into the AC input terminal. 3. Plug the power cord (supplied) into the AC power outlet. For power outlet 3 Power cord (Supplied) Main power
  • Sharp PN-Y325 | Operation Manual - Page 15
    Binding Cables The cables connected to the terminals on the rear of the monitor can be fastened with the cable clamp. Attach the cable clamp into the cable clamp attachment on the rear of the monitor and fasten the cables. Cable clamp Cable clamp attachment Cable Setting the USB flash drive cover
  • Sharp PN-Y325 | Operation Manual - Page 16
    .4 feet (5 m) at an angle of approx 10° from the center to the top/ bottom/right/left of the remote control sensor. 2. See the instructions in the compartment and put in the supplied batteries (R-6 ("AA" size) x 2) with their plus (+) and minus (-) sides oriented correctly. 3. Close the cover. TIPS
  • Sharp PN-Y325 | Operation Manual - Page 17
    Turning Power On/Off Caution • Turn on the monitor first before turning on the PC or playback device. Turning power on/off Press the POWER button to turn the power ON/OFF. Turning on the main power When the main power is turned on, the power LED lights. Wait until the screen is displayed. Main
  • Sharp PN-Y325 | Operation Manual - Page 18
    Turning Power On/Off nDate/time setting • If the time has not been set, such as when the monitor is first turned on, set the date and time in DATE/TIME SETTING of the SETUP menu. Be sure to set the date and time. TIPS • Set the time on a 24-hour basis. • The clock stops if the main power remains off
  • Sharp PN-Y325 | Operation Manual - Page 19
    Basic Operation 5. BRIGHT +/- (Brightness adjustment) Pressing or displays the BRIGHT menu when the 1 menu screen is not displayed. 2 3 4 5 6 7 9 8 10 1. INPUT (Input mode selection) The menu is displayed. Press or to select the input mode, and press ENTER to enter. * You can select the
  • Sharp PN-Y325 | Operation Manual - Page 20
    Basic Operation nSwitching the screen size Even when the screen size is changed, the display may remain the same depending on the input signal. NORMAL Displays image so it fills the screen without changing the aspect ratio of the input signals. WIDE Displays image so it fills the entire screen.
  • Sharp PN-Y325 | Operation Manual - Page 21
    cases it may not be possible to play the above files. • A maximum of 32 alphanumeric characters can be used for folder name and file name. A file name or folder a product failure or problem. • Operation is not assured when a non-supported format is used. The following types of problems may occur: -
  • Sharp PN-Y325 | Operation Manual - Page 22
    Playing the Files in a USB Flash Drive n Selecting files to be played 1. Insert the USB flash drive into a USB port on the monitor. (See page 12.) 2. Change an input mode to [USB]. (See page 19.) 3. Press . 4. Select an icon with or (4) (3) and press . ENTER (2) (1) (1) Folder Folders
  • Sharp PN-Y325 | Operation Manual - Page 23
    Playing the Files in a USB Flash Drive Operations during play n Image files Operation is possible using the buttons below. / DISPLAY ENTER : Play/Pause a slideshow. MODE : Rotate the display 90° clockwise. RETURN : End playback. n Video files Operation is possible using the buttons below
  • Sharp PN-Y325 | Operation Manual - Page 24
    Playing the Files in a USB Flash Drive n Settings during play Press MENU during playback. Configure the desired setting with , , , , and . ENTER Options "Settings when the file list is displayed" (See page 23.) or "Status" (only when playing video) appears. Picture and sound COLOR MODE Changes the
  • Sharp PN-Y325 | Operation Manual - Page 25
    Menu Items Displaying the menu screen nMenu screen display Video and audio adjustment and settings of various functions 1 2 are enabled. This section describes how to use the menu items. See pages 26 to 31 for details of each menu item. SCREEN PICTURE BRIGHT CONTRAST AUDIO BLACK LEVEL
  • Sharp PN-Y325 | Operation Manual - Page 26
    hue. Selecting - changes the color towards magenta, and selecting + changes it towards green. COLORS Adjusts the color intensity. SHARPNESS (HDMI[AV]/D-SUB[COMPONENT]/D-SUB[VIDEO]) Adjusts the sharpness of the image. COLOR ADJUSTMENT COLOR MODE Changes the color mode on the screen. The color mode on
  • Sharp PN-Y325 | Operation Manual - Page 27
    mode becomes longer. If set to LOW POWER, RS-232C commands cannot be used in standby mode and control via LAN is disabled. (See page 32, 38.) When set to LOW POWER, the monitor enters power standby mode rather than input signal standby mode when there is no input signal, and
  • Sharp PN-Y325 | Operation Manual - Page 28
    Menu Items POWER ON DELAY You can delay the screen display after the monitor is turned on. The period can be set up to 60 seconds in units of 1 second. When this function is activated, the power LED flashes (at approx. 1 second interval) in orange. AUTO INPUT CHANGE Specify whether to change inputs
  • Sharp PN-Y325 | Operation Manual - Page 29
    nEnlarge • You can align several monitors and integrate them into a single large screen to display. • Up to 5 monitors can be aligned in both the horizontal and vertical directions. • Each monitor displays enlarged views of separated images. (Example) Horizontal direction: 2 monitors Vertical
  • Sharp PN-Y325 | Operation Manual - Page 30
    Menu Items nSCHEDULE You can set the time to switch the motion on and off. A file in a USB flash drive can also be played at a specified time. Set "INPUT" in SCHEDULE to "USB", and create a play list. Set this function with SCHEDULE in the SETUP menu. (See page 27.) SCHEDULE 1 SCHEDULE 2 SCHEDULE
  • Sharp PN-Y325 | Operation Manual - Page 31
    's CD- ROM drive. 2. Open [CD Drive] in [Computer]. 3. Double-click [Adj_uty.exe]. The adjustment pattern will appear. Adjust the screen automatically or manually. TIPS • Up to 3 SCHEDULE items can be registered. • Setting the SCHEDULE flashes the power LED alternately in red and orange in standby
  • Sharp PN-Y325 | Operation Manual - Page 32
    space, ?) RS-232 straight cable (commercially available) nDaisy chain connection... Advanced operation PN-Y325 monitors can be connected together in a daisy chain connection. Connect with RS-232 straight example, ID number = 1). VOLM ? ← From PC to monitor. 30 001 ← From monitor to PC. E 32
  • Sharp PN-Y325 | Operation Manual - Page 33
    Controlling the Monitor with a PC (RS-232C) nResponse code format When a command has been executed correctly O K Return code (0DH, 0AH) A response is returned after a command is executed. * If an ID number has been assigned Space (20H) Return code (0DH, 0AH) O K SPC 0 0 1 ID number of
  • Sharp PN-Y325 | Operation Manual - Page 34
    Controlling the Monitor with a PC (RS-232C) nCommands for ID control The command examples shown on this page assume the following connection and ID SETTING. ID number: 1 ID number: 2 ID number: 3 ID number: 4 IDLK The parameter of this command sets the ID number of the monitor. The monitor is
  • Sharp PN-Y325 | Operation Manual - Page 35
    Controlling the Monitor with a PC (RS-232C) nRepeater control This system has a function to allow setting of multiple monitors connected in a daisy chain using a single command. This function is called repeater control. You can use Repeater control function without assigning ID numbers. [Example]
  • Sharp PN-Y325 | Operation Manual - Page 36
    indicated under "Reply" can be obtained by setting "????", " ?" or "???+" (repeater control) in the parameter field (see page 32). Parameter field (See page 32.) Response (Returned value) "○" indicates a command which can be used in power standby mode. "-" indicates a command which cannot be
  • Sharp PN-Y325 | Operation Manual - Page 37
    Controlling the Monitor with a PC (RS-232C) SETUP menu Function Command Direction Parameter Reply Control/Response contents * DATE/TIME SETTING DATE WR AABBCCDDEE AABBCCDDEE AA: Year, BB: Month, CC: Day, DD: Hour, EE: Minute ID SETTING ID NO.SETTING IDST W 0-25 Sets the monitor's ID
  • Sharp PN-Y325 | Operation Manual - Page 38
    DHCP CLIENT If your LAN has a DHCP server and you wish to obtain an address automatically, change this setting to ON. To set the address manually, set this to OFF. IP ADDRESS If the DHCP CLIENT is set to OFF, specify an IP address. SUBNET MASK If the DHCP CLIENT is
  • Sharp PN-Y325 | Operation Manual - Page 39
    software and other appropriate applications. Read the manual for the terminal software for detailed instructions. (1) Connect the PC to the monitor. same as those for RS232C. Refer to the communication procedure (see page 32) for operation. • Usable commands are provided in the RS-232C command
  • Sharp PN-Y325 | Operation Manual - Page 40
    If you are experiencing any problem with your display, before calling for service, please review the following troubleshooting tips. There is no picture properly. • Is the file in a supported format? (See page 21.) The following problems may occur if a non-supported format is used: - The file does
  • Sharp PN-Y325 | Operation Manual - Page 41
    brightness of the backlight decreases automatically in order to prevent high-temperature-related problems. When this occurs, the Power LED flashes red and green alternately. • monitor or around the vents. Remove dust if possible. Ask SHARP dealer about removing internal dust. Troubleshooting 41 E
  • Sharp PN-Y325 | Operation Manual - Page 42
    Specifications nProduct Specifications Model PN-Y325 LCD component 32" Class [31-9/16 inch (80.1cm) diagonal] TFT LCD may change when using the monitor together with the optional equipments recommended by SHARP. In such cases, please check the temperature condition specified by the optional
  • Sharp PN-Y325 | Operation Manual - Page 43
    height (15-9/16 [396]) 1-7/8 [48] When mounting the monitor, be sure to use a wall-mount bracket that complies with the VESA-compatible mounting method. SHARP recommends using M6 screws and tighten the screws. Note that screw hole depth of the monitor is 3/8 inch (10 mm). Loose mounting may cause
  • Sharp PN-Y325 | Operation Manual - Page 44
    between monitors and computers. Information about resolution and other parameters is exchanged between the two. This function can be used if the computer supports DDC and it has been configured to detect plug-and-play monitors. There are several types of DDC, depending on the communication method
  • Sharp PN-Y325 | Operation Manual - Page 45
    Specifications nCompatible signal timing (PC) Screen resolution Hsync Vsync Dot frequency Digital DVI-D HDMI Analog (D-SUB) VESA 640 × 480 31.5kHz 60Hz 25.175MHz Yes Yes Yes 37.9kHz 72Hz 31.5MHz Yes Yes Yes 37.5kHz 75Hz 31.5MHz Yes Yes Yes 800 × 600 35.1kHz 56Hz 36.
  • Sharp PN-Y325 | Operation Manual - Page 46
    Specifications nDVI-D input terminal pins (DVI-D 24 pin) nHDMI input terminal pins (HDMITM Connector) No. Function 1 TMDS data 2- 2 TMDS data 2+ 3 TMDS data 2/4 shield 4 N.C. 5 N.C. 6 DDC clock 7 DDC data 8 N.C. 9 TMDS data 1- 10 TMDS data 1+ 11 TMDS data 1/3 shield 12 N.C. No.
  • Sharp PN-Y325 | Operation Manual - Page 47
    nDVI-D output terminal pins (DVI-D 24 pin) Specifications nRS-232C output terminal pins (D-sub 9 pin) No. Function 1 TMDS data 2- 2 TMDS data 2+ 3 TMDS data 2/4 shield 4 N.C. 5 N.C. 6 DDC clock 7 DDC data 8 N.C. 9 TMDS data 1- 10 TMDS data 1+ 11 TMDS data 1/3 shield 12 N.C. No.
  • Sharp PN-Y325 | Operation Manual - Page 48
    Mounting Precautions (For SHARP dealers and service engineers) • Be sure to use a wall-mount bracket designed or designated for mounting the monitor. • This monitor is designed to be installed on a concrete wall
  • Sharp PN-Y325 | Operation Manual - Page 49
    PN-Y325 Mu EN14G(3)
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
PN-Y325
LCD MONITOR
OPERATION MANUAL