Sharp R520KST R-428JK/JW Microwave Operation Manual - Page 12

SPECIAL FEATURES SENSOR COOK Sharp's Sensor is a semi-conductor device that detects the vapor (moisture and humidity) emitted from the food as it heats. The sensor adjusts the cooking times and power level for various foods and quantities. Using Sensor Settings: 1. After the oven is plugged in, wait 2 minutes before using Sensor Cook. 2. Be sure the exterior of the cooking container and the interior of the oven are dry. Wipe off any moisture with a dry cloth or paper towel. 3. The oven works with foods at normal storage temperature. For example, popcorn would be at room temperature. 4. Any Sensor Cook selection can be programmed with More or Less Time Adjustment. See page 16. 5. More or less food than the quantity listed in the chart should be cooked following the guidelines in any microwave cookbook. 6. During the first part of Sensor Cook, the food name will appear on the display. Do not open the oven door or touch STOP/CLEAR during this part of the cooking cycle. The measurement of vapor will be interrupted. If this occurs, an error message will appear. To continue cooking, touch the STOP/CLEAR pad and cook manually. When the sensor detects the vapor emitted from the food, the remainder of cooking time will appear. The door may be opened when remaining cooking time appears on the display. At this time, you may stir or season food, as desired. 7. If the sensor does not detect vapor properly when popping popcorn, the oven will turn off, and the correct time of day will be displayed. If the sensor does not detect vapor properly when cooking other foods, ERROR will be displayed, and the oven will turn off. 8. Check food temperature after cooking. If additional time is needed, continue to cook manually. 9. Each food has a cooking hint. Touch the CUSTOM HELP pad when the HELP indicator is lighted in the display. Covering Foods: Some foods work best when covered. Use the cover recommended in the Sensor Cook chart for these foods. 1. Casserole lid. 2. Plastic wrap: Use plastic wrap recommended for microwave cooking. Cover dish loosely; allow approximately 1/2 inch to remain uncovered to allow steam to escape. Plastic wrap should not touch food. 3. Wax paper: Cover dish completely; fold excess wrap under dish to secure. If dish is wider than paper, overlap two pieces at least one inch to cover. Be careful when removing any covering to allow steam to escape away from you. EXAMPLE: You can cook many foods by touching any Sensor pad and START/MINUTE PLUS. You don't need to calculate cooking time or power level. • Suppose you want to reheat canned chili. PROCEDURE Touch SENSOR REHEAT pad. SENSOR REHEAT When the sensor detects the vapor emitted from the food, the remainder of cooking time will appear. SENSOR COOK CHART FOOD AMOUNT PROCEDURE SENSOR REHEAT 4 - 36 oz Place in dish or casserole slightly larger than amount to be reheated. Flatten, if possible. Cover with lid, plastic wrap or wax paper. Use covers such as plastic wrap or lids with larger quantities of more dense foods such as stews. After reheating, stir well, if possible. Re-cover and allow to stand 2 to 3 minutes. Foods should be very hot. If not, continue to heat with variable power and time. BAKED POTATOES 1 - 6 med.* Pierce. Place on paper-towel-lined turntable. After cooking, remove from 1 - 8 med.** oven, wrap in aluminum foil and let stand 5 to 10 minutes. POPCORN 1 package Use only popcorn packaged for the microwave. Try several brands to 1.5 - 3.5 oz bag decide which you like. Do not try to pop unpopped kernels. NOTE: The symbol * is for model number R-428J only. The symbol ** is for model number R-520K and R-520J only. 10