Sharp UN552V-TMX9P Installation Instructions for the

Sharp UN552V-TMX9P Manual

Get Sharp UN552V-TMX9P PDF manuals and user guides View all Sharp UN552V-TMX9P manuals
Add to My Manuals
Save this manual to your list of manuals

Sharp UN552V-TMX9P manual content summary:

  • Sharp UN552V-TMX9P | Installation Instructions for the - Page 1
    Parts List o (9) UN552S , UN552VS, UN552, UN552V Displays o (9) Onsite Service Warranties (ONSITEMN-3Y-17) o (9) Peerless Pullout Wall Mounts (DS-VW775) this video wall solution is anchored to must be strong enough to support the displays and the installation must be in accordance with any local
  • Sharp UN552V-TMX9P | Installation Instructions for the - Page 2
    , Inc. QIG-TMX9P-552SVSV UN552S-TMX9P, UN552VS-TMX9P, UN552-TMX9P, UN552V-TMX9P Rev 1.1 1. For mounting information, please refer to Installation Instructions provided by Peerless Industries, Inc. inside the box of the DS-VW775. 2. Connect the NEC display using the provided DisplayPort cables
  • Sharp UN552V-TMX9P | Installation Instructions for the - Page 3
    NEC Display Solutions of America, Inc. QIG-TMX9P-552SVSV UN552S-TMX9P, UN552VS-TMX9P, UN552-TMX9P, UN552V-TMX9P Rev 1.1 4. Screw the IR Receiver (KT-RC3) directly to the outside of the video wall and plug it directly into the IR In terminal of Display 1 as shown below. 5. Power up all of the
  • Sharp UN552V-TMX9P | Installation Instructions for the - Page 4
    NEC Display Solutions of America, Inc. QIG-TMX9P-552SVSV UN552S-TMX9P, UN552VS-TMX9P, UN552-TMX9P, UN552V-TMX9P Rev 1.1 If the control setup is as pictured below, each display does not need a unique IP address assigned to still control each individual monitor. Note that a unique IP address is
  • Sharp UN552V-TMX9P | Installation Instructions for the - Page 5
    NEC Display Solutions of America, Inc. QIG-TMX9P-552SVSV UN552S-TMX9P, UN552VS-TMX9P, UN552-TMX9P, UN552V-TMX9P Rev 1.1 7. If display 1 is connected to a network or LAN is going into display 1, like the picture below, each display will need a unique IP address to ensure that communication can
  • Sharp UN552V-TMX9P | Installation Instructions for the - Page 6
    automatically switch each display to the DisplayPort input. If the source is inputted into display 1 via HDMI, DVI or the OPTION input, it will manually have to be changed. If a source is connected into display 1 and everything is daisy chained properly, each display should be showing the same image
  • Sharp UN552V-TMX9P | Installation Instructions for the - Page 7
    NEC Display Solutions of America, Inc. QIG-TMX9P-552SVSV UN552S-TMX9P, UN552VS-TMX9P, UN552-TMX9P, UN552V-TMX9P Rev 1.1 Note that there is a limitation if High-bandwidth Digital Content Protection (HDCP) is utilized. If inputting HDCP protected content through the HDMI, DP, DVI, or OPTION
  • Sharp UN552V-TMX9P | Installation Instructions for the - Page 8
    NEC Display Solutions of America, Inc. QIG-TMX9P-552SVSV UN552S-TMX9P, UN552VS-TMX9P, UN552-TMX9P, UN552V-TMX9P Rev 1.1 If you are experiencing issues with this setup, please call our Technical Support number at (800) 632-4662 8
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
NEC Display Solutions of America, Inc.
QIG-TMX9P-552SVSV
UN552S-TMX9P, UN552VS-TMX9P, UN552-TMX9P, UN552V-TMX9P
Rev 1.1
Parts List
o
(9) UN552S , UN552VS, UN552, UN552V Displays
o
(9) Onsite Service Warranties (ONSITEMN-3Y-17)
o
(9) Peerless Pullout Wall Mounts (DS-VW775)
o
(1) Peerless Wall Mount Spacer (DS-VWRS090)
o
(1) 25ft Cat5e Patch Cable
o
(1) IR/Remote Control Kit (KT-RC3)
o
(2) SurgeX 6-Port Power Conditioners
o
(1) Display Wall Calibrator Kit (KT-LFD-CC2)
NOTES:
o
Any walls that this video wall solution is anchored to must be strong enough to support the displays and the
installation must be in accordance with any local building codes.
All mounting apparatuses must make secure
contact to wooden studs.
o
Please read entire document before starting installation