Sharp VL-AH130U VLAH130U Operation Manual
Sharp VL-AH130U Manual
 |
View all Sharp VL-AH130U manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp VL-AH130U manual content summary:
- Sharp VL-AH130U | VLAH130U Operation Manual - Page 1
Summary Preparation LIQUID CRYSTAL DISPLAY CAMCORDER MODEL VL-AH130U OPERATION MANUAL Basic Operations Camera Recording Basic Operations Playback Useful Features Advanced Features NTSC Please read this operation manual carefully before using the VIEWCAM. Important For assistance in reporting - Sharp VL-AH130U | VLAH130U Operation Manual - Page 2
Thank you for purchasing this VIEWCAM from SHARP. The VIEWCAM will enhance your home video enjoyment and allow you to capture those special moments. Please read this operation manual to familiarize yourself with the VIEWCAM's features, so that you will get the most out of it. The video techniques - Sharp VL-AH130U | VLAH130U Operation Manual - Page 3
used in accordance with the instructions, may cause harmful interference to has already been recorded, the audio track of the new VIEWCAM recording may not come out if the tape is played STANDARD" position. COPYRIGHT WARNING: It is the intent of SHARP that this unit be used in full compliance with the - Sharp VL-AH130U | VLAH130U Operation Manual - Page 4
. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 11. Power Sources-This product should be operated only from the type of power source indicated on the marking label - Sharp VL-AH130U | VLAH130U Operation Manual - Page 5
normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other 21. Safety Check-Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine - Sharp VL-AH130U | VLAH130U Operation Manual - Page 6
. • Some small, portable tripods may be difficult to attach and may not be sturdy enough to support your VIEWCAM. Be sure to use only a strong, stable tripod. • When using your VIEWCAM in a cold environment, the LCD monitor screen often appears less bright immediately after the power is turned - Sharp VL-AH130U | VLAH130U Operation Manual - Page 7
a Hi8 tape in normal 8 mm format, set the menu item to "OFF" on the (MENU 1) screen (Camera mode) before recording. (See page 25 for operation of the menu screen.) The VIEWCAM is equipped with a large LCD monitor screen that allows you to record scenes while comfortably holding the camcorder - Sharp VL-AH130U | VLAH130U Operation Manual - Page 8
AA battery for remote control ן2 * Note: The part numbers for the AC adapter and battery pack supplied with this VIEWCAM are valid only in the U.S. and Latin America. If this VIEWCAM was purchased outside of these areas, the part numbers may be different. Please refer to the part numbers printed - Sharp VL-AH130U | VLAH130U Operation Manual - Page 9
BT-H32 Sun hood VR-60BFN Accessory shoe adapter VR-30ADN Tripod adapter for 180° recording VR-33FAN Note: The listed model names are for U.S. accessories. For optional and additional accessories, contact your local dealer, call the Sharp Accessories and Supply Center at 1-800-642-2122, or visit - Sharp VL-AH130U | VLAH130U Operation Manual - Page 10
Names 3 Quick Reference Index 5 Warning Indicators 6 Preparation Inserting and Removing the Battery Pack 7 Charging the Battery Pack 8 Powering the VIEWCAM from an AC Outlet........... 9 Inserting and Removing a Cassette 10 Installing the Lithium Memory Battery 11 Selecting the Language for - Sharp VL-AH130U | VLAH130U Operation Manual - Page 11
Hood 32 Self Recording 33 Setting the VIEWCAM to Full Auto Mode 35 Program Search Manual Exposure 46 Picture/Backlight Adjustments 47 Gamma Playback 48 Turning Off the LCD Monitor Backlight 48 Editing 49 References Useful Information 50 Demonstration Mode 54 Before Requesting Service - Sharp VL-AH130U | VLAH130U Operation Manual - Page 12
Operation Summary Operation Summary Part Names For details on the use of each part, refer to the page number indicated in the brackets. Front view Zoom lens Microphone Terminal cover AUDIO/VIDEO jack [pp. 22, 49] Speaker DC IN jack [pp. 8, 9] When the cassette compartment door is open Lens - Sharp VL-AH130U | VLAH130U Operation Manual - Page 13
Operation Summary Rear view RECord START/STOP button [p. 18] LCD monitor screen Power Zoom Wide angle/ Telephoto control [p. 19] VOLume control [p. 21] Remote sensor [p. 39] CHARGE indicator [p. 8] Shoulder strap loop [p. 17] FADE button [p. 27] MENU button [p. 24] Hand strap [p. 17] - Sharp VL-AH130U | VLAH130U Operation Manual - Page 14
Index This index lists some example uses of the VIEWCAM's features. • To record with a Hi8 tape in normal 8 mm format. -See page vi record a backlit subject. -See page 30 (Gamma Brightness Compensation) or page 46 (Manual Exposure) • To record in a dark or poorly-illuminated location. -See page 31 - Sharp VL-AH130U | VLAH130U Operation Manual - Page 15
charged battery pack (see page 7). The video heads are clogged and should be cleaned (see page 51). There is no video cassette in the VIEWCAM. Insert a cassette (see page 10). The erasure protect tab on the video cassette has been slid to the record-protect position, preventing recording (see - Sharp VL-AH130U | VLAH130U Operation Manual - Page 16
faces down. The battery pack may fall out. • Do not expose the battery compartment door to strong force, as it may come off. • Use only SHARP model BT-H22 or BT-H32 battery packs with this VIEWCAM. Use of other batteries may present a risk of fire or explosion. 7 - Sharp VL-AH130U | VLAH130U Operation Manual - Page 17
3 hr. 10 min. approx. 3 hr. 10 min. 1 Insert the battery pack into the VIEWCAM (see page 7). Make sure that the Power switch is set to OFF. • The battery pack on using the battery pack. Terminal cover Caution: • Charge only SHARP model BT-H22 or BT-H32 battery packs. Other types of battery packs - Sharp VL-AH130U | VLAH130U Operation Manual - Page 18
from an AC Outlet Caution: • The supplied AC adapter is specially designed for use with this VIEWCAM, and should not be used as a power supply for other camcorders. Cautions: • BEFORE REMOVING THE DC PLUG, ALWAYS STOP THE TAPE AND TURN THE POWER OFF. If you remove the DC plug during recording - Sharp VL-AH130U | VLAH130U Operation Manual - Page 19
holder except when pressing the PUSH mark to close it. • Do not tilt the VIEWCAM or hold it upside down when you are inserting or removing a cassette. It may , repeat the insertion procedure. • Do not attempt to pick up the VIEWCAM by the cassette compartment door. Notes: • If the battery power is - Sharp VL-AH130U | VLAH130U Operation Manual - Page 20
compartment door by pressing the center until it clicks into place. Cassette compartment door release Note: The cassette holder will extend and open when the VIEWCAM is connected to a power source. Be sure to close the cassette holder before proceeding to the next step (see page 10). 2 Pull out the - Sharp VL-AH130U | VLAH130U Operation Manual - Page 21
language. Power switch MENU button Operation buttons Setting the Language When using the VIEWCAM for the first time, select the desired language for the on-screen display procedures in the following sections of this operation manual are based on the use of on-screen displays in English. 12 - Sharp VL-AH130U | VLAH130U Operation Manual - Page 22
Preparation English On-screen Displays The following on-screen displays appear when "ENGLISH" is selected as the on-screen display language (see page 12). Camera Mode Preparation PIC GAMA QK EFF E F F REW COUNTER FOCUS WH I T E EXPO BA L. SURE T I - RE- SCENE T L E TURN 1 6 9 MENU VCR - Sharp VL-AH130U | VLAH130U Operation Manual - Page 23
Preparation French On-screen Displays The following on-screen displays appear when "FRANÇAIS" is selected as the onscreen display language (see page 12). Camera Mode ME NU IMAGE EFF. REVU GAMM RAP. COMP T EUR FOCUS BAL. EXPO BL ANC S I T . T I - RE- ME NU TRE TOUR 1 6 9 S C ENE VCR Mode - Sharp VL-AH130U | VLAH130U Operation Manual - Page 24
Preparation Preparation Spanish On-screen Displays The following on-screen displays appear when "ESPAÑOL" is selected as the onscreen display language (see page 12). Camera Mode EF. IMA. EF. REV. GAM. RA P. CONT AD. ENFOQUE BAL. EXBCO PO. T I - RE- MENU TULO TOR. 16 9 ESCE. VCR Mode MENU - Sharp VL-AH130U | VLAH130U Operation Manual - Page 25
Setting the Date and Time Example: Setting the date to June 2, 2001 (JUN. 2. 2001) and the time to 10:30 am (10:30 AM). Note: • Check that the lithium memory battery has been installed before setting the date and time. Power switch MENU button DISPLAY button 1 Hold down the Lock button and slide - Sharp VL-AH130U | VLAH130U Operation Manual - Page 26
strap flap (W). Notes: • Always replace the lens cap on the lens when the VIEWCAM is not in use. • Attach the lens cap to the hand strap so it strap to the loop on the lens side. Caution: • Do not swing the VIEWCAM by the hand strap. Attaching and Removing the Lens Cap When attaching or removing - Sharp VL-AH130U | VLAH130U Operation Manual - Page 27
in Camera mode. • Battery power is consumed in Recording Standby mode. Turn off the power if you will not be recording again soon. • If the VIEWCAM is kept in Recording Standby mode for more than approximately 5 minutes, the power will automatically turn off to save battery power and to protect the - Sharp VL-AH130U | VLAH130U Operation Manual - Page 28
when you want to record over a crowd. Low Angle Put one knee on the ground for the best stability. Notes: • In hand-held recording, the VIEWCAM has to be steadied to prevent image shakes. For very stable recording, use a tripod. • Take care not to touch the microphone with your fingers during - Sharp VL-AH130U | VLAH130U Operation Manual - Page 29
before the tape reaches the end, an on-screen indicator displays the approximate remaining recording time. Remaining Battery Power Display When using the VIEWCAM with the battery pack as the power source, you can turn on and off the remaining battery power display by pressing the DISPLAY button - Sharp VL-AH130U | VLAH130U Operation Manual - Page 30
2 Press the REW (C) (or FF [B]) button to rewind (or fast forward) the tape to the desired point. REW P LAY FF STOP ST I LL While the VIEWCAM is in VCR mode, push the Volume control to the םor מside to increase (Q) or decrease (W) the volume to your preference. The volume level indicator - Sharp VL-AH130U | VLAH130U Operation Manual - Page 31
as you normally do to see the signal from the VCR. (See the operation manuals of your TV and VCR.) 4 Turn on the VIEWCAM in VCR mode, and begin tape playback (see page 21). Caution: • Make sure that the VIEWCAM, TV, VCR and other equipment to be connected have been turned off before - Sharp VL-AH130U | VLAH130U Operation Manual - Page 32
normal playback, press the PLAY button (D) on the remote control. Notes: • The sound is off during Still and Slow modes. • To protect the tape, the VIEWCAM automatically returns to normal playback if it is left in Still mode for more than 5 minutes or in Slow mode for more than 40 seconds - Sharp VL-AH130U | VLAH130U Operation Manual - Page 33
UUsesfuel fFuealturFeseatures Operations of the On-screen Controls Using the Control Buttons The following buttons on the VIEWCAM can be used to control the various functions, settings and on-screen displays. MENU button DISPLAY button Operation buttons MENU button Each time you press - Sharp VL-AH130U | VLAH130U Operation Manual - Page 34
Useful Features Adjusting the Menu Settings Follow the procedure below to adjust the desired menu settings. Camera mode 1 Hold down the Lock button and slide the Power switch to CAMERA. 2 Press the MENU button until appears. 5 Press the SET button (B) to select the desired setting. • Each time you - Sharp VL-AH130U | VLAH130U Operation Manual - Page 35
Recording the Date and Time Follow the procedure shown below to record the date and time, or the date only, along with the subject. Note: • Before performing the procedure below, make sure that the date and time have been correctly set (see page 16). 1 In Recording Standby mode, press the MENU - Sharp VL-AH130U | VLAH130U Operation Manual - Page 36
function allows you to gradually bring the image and sound in or out at the beginning or end of a scene to create a scene transition. This VIEWCAM features one normal and two animated fade modes. Type of Fade Modes NORMAL: The picture fades in from and out to white. HOLIDAY: The picture - Sharp VL-AH130U | VLAH130U Operation Manual - Page 37
START/STOP button at the point where you wish to stop recording. • The picture and sound fade out as the screen gradually turns white. The VIEWCAM then returns to Recording Standby mode. 2 Press the QK. REW button ( ). • The tape rewinds to the point of 5 seconds before the current tape position - Sharp VL-AH130U | VLAH130U Operation Manual - Page 38
scene. RE T UR N QU I CK RE TURN T I - RE- SCENE T L E TURN 1 6 9 MENU When the tape reaches the end of the last recorded scene, the VIEWCAM enters the Recording Standby mode. Notes: • To cancel the quick return function, press the RETURN button again in step 2. • If the cassette has been - Sharp VL-AH130U | VLAH130U Operation Manual - Page 39
Gamma Brightness Compensation When the subject is backlit, the image will be darkened if it is recorded normally. The gamma brightness compensation function improves the picture by increasing the brightness of the subject while leaving the brighter portions of the image unaffected. 1 Press the MENU - Sharp VL-AH130U | VLAH130U Operation Manual - Page 40
Press the GAMA EFF. button until "GAMMA" disappears. Notes: • The Gain-up mode will disengage and the indicator will disappear automatically if the VIEWCAM is moved to a bright location. • Some picture noise appears in Gain-up mode. The picture noise increases when the indicator is displayed. GAMA - Sharp VL-AH130U | VLAH130U Operation Manual - Page 41
a magnified image of a subject which is within approximately 5 feet (1.5 m) of the VIEWCAM, do not zoom in on it. Instead, zoom out all the way by pushing :9 button. Note: • You can only use the wide screen function when the VIEWCAM is in Camera mode. Notes: • When you are recording a macro shot, - Sharp VL-AH130U | VLAH130U Operation Manual - Page 42
sure to rotate the monitor, NOT the lens. If you hold the VIEWCAM upside down with the lens at the bottom, the subject will be recorded position. • In Self Recording mode, it is not possible to record using manual recording modes, change picture adjustments, display menus, record the date and time, - Sharp VL-AH130U | VLAH130U Operation Manual - Page 43
START ME S SAGE PRESS REC S TART FOR L E A V I NG YOUR ME S SAGE. At the end of the recording, the screen fades out, and the VIEWCAM returns to Recording Standby mode. Note: • When you want to stop recording before message recording stops automatically, press the REC STOP button (B). • To cancel - Sharp VL-AH130U | VLAH130U Operation Manual - Page 44
, record subjects in Full Auto mode. If "AUTO" is not displayed even when the DISPLAY button is pressed, perform the procedure below to set the VIEWCAM to Full Auto mode. 1 In Recording Standby mode, press the MENU button until appears. If "PIC. EFF." is not displayed above the D button, press this - Sharp VL-AH130U | VLAH130U Operation Manual - Page 45
Program Search The program search function automatically finds and plays back the beginning of a number of previously recorded scenes. Up to 10 different scenes can be found on one tape. Note: • This function does not work if no recording has been made since the cassette was loaded, if the cassette - Sharp VL-AH130U | VLAH130U Operation Manual - Page 46
Useful Features Tape Counter Feature The tape counter shows elapsed playback or recording time in hours, minutes and seconds. (The counter continues to count internally even while it is not being displayed.) This feature can be set and used in both VCR and Camera modes. Using the Counter VCR mode 1 - Sharp VL-AH130U | VLAH130U Operation Manual - Page 47
Using the Counter Memory Use the counter memory feature when you want to return to the beginning of a particular scene. The position where the counter was reset (0:00.00) is stored in memory to make it easier to return to that point on the tape. VCR mode 1 During playback, press the MENU button - Sharp VL-AH130U | VLAH130U Operation Manual - Page 48
remote sensor, as this may prevent the remote control from operating properly. • Be sure that there are no obstacles between the remote control and the VIEWCAM remote sensor. • The remote control cannot be used to move the pointer, or select or set any of the various functions on the monitor. • When - Sharp VL-AH130U | VLAH130U Operation Manual - Page 49
Advanced Features Digital Picture Effects These digital picture effects let you record the subject with a more dramatic effect. Type of Digital Picture Effects B/W EFF.: The picture is recorded in black- and-white. SEPA EFF.: The picture is recorded in sepia color similar to that of an old - Sharp VL-AH130U | VLAH130U Operation Manual - Page 50
mode that will create the best results for a specific type of shooting situation. Just select one of the four scene settings shown below. The VIEWCAM will automatically set the exposure, white balance, and shutter speed to produce the optimum picture quality for the selected situation. Type of Scene - Sharp VL-AH130U | VLAH130U Operation Manual - Page 51
Superimposing a Title Use the title feature to superimpose titles on your videos when recording. There are eight titles preset for your convenience which you can choose from. 1 In Recording Standby mode, press the MENU button until appears. T I - RE- SCENE T L E TURN 1 6 9 MENU 3 Press the ĭ or - Sharp VL-AH130U | VLAH130U Operation Manual - Page 52
Advanced Features Changing the Preset Titles You can make a new title of your own by changing any of the eight preset titles. The maximum number of title characters is fifteen. Example: Changing "WEDDING DAY" to "IN HAWAII". 1 Press the MENU button until appears, and then press the TITLE button - Sharp VL-AH130U | VLAH130U Operation Manual - Page 53
The Auto Focus may not be able to focus on the subject in the situations shown below. In such situations, set the VIEWCAM to Manual Focus mode and focus manually. 1 In Recording Standby mode, press the MENU button until appears. FOCUS WH I T E E XPO BAL. SURE 2 Press the FOCUS button (D) to set - Sharp VL-AH130U | VLAH130U Operation Manual - Page 54
white balance has been locked, white balance shifts may occur due to slight changes in illumination or depending on the subject. • Do not move the VIEWCAM while "WHITE BAL." is flashing in step 3. • If "WHITE BAL." does not stop flashing in step 3, press the WHITE BAL. button to cancel the locking - Sharp VL-AH130U | VLAH130U Operation Manual - Page 55
Exposure The VIEWCAM is preset to Auto Exposure mode, which automatically chooses the optimal aperture. When there is too much contrast in brightness between the subject and background, however, you may not be able to record a clear image. In this case, use the manual exposure function to correct - Sharp VL-AH130U | VLAH130U Operation Manual - Page 56
the EXIT button () to turn off the adjustment screen. Notes: • If you set the backlight ("BACKLIGHT") to "AUTO" in Camera mode and then set the VIEWCAM to VCR mode, the backlight mode automatically changes to "NORMAL". • When the color or tint is adjusted, the picture on the screen may differ from - Sharp VL-AH130U | VLAH130U Operation Manual - Page 57
Gamma Playback The gamma playback function improves the picture by increasing the brightness of the subject while leaving the brighter portions of the image unaffected. 1 During playback, press the MENU button until appears. GAMA COUEFF. NTER SEARCH Turning Off the LCD Monitor Backlight The LCD - Sharp VL-AH130U | VLAH130U Operation Manual - Page 58
having to connect it to an external TV or video monitor. Connect the VIEWCAM to a VCR with the supplied audio/video cable, as shown. Recording Yellow sequence to be cut. To stop editing Press the Stop buttons on the VIEWCAM and the VCR. Notes: • Some of the transitions between edited sequences may - Sharp VL-AH130U | VLAH130U Operation Manual - Page 59
. Adequate lighting is also essential for correct white balance. Brightness (Lux) Situation (Lux) Blue sky Position the subject in the center. Focus manually when you need to position the subject off center (see page 44). • Avoid backlit subjects. For the best picture, shoot with the light - Sharp VL-AH130U | VLAH130U Operation Manual - Page 60
VIEWCAM in a humid room. • How to prevent trouble due to dew formation. When using the VIEWCAM in a place where dew formation is likely to occur, allow the VIEWCAM SHARP service center or your dealer for further advice. Plastic bag Q Be sure to tightly seal the plastic bag containing the VIEWCAM. - Sharp VL-AH130U | VLAH130U Operation Manual - Page 61
uses a Ni-MH (nickel-metal hydride) type battery pack. Use only the SHARP BT-H22 or BT-H32 battery packs. They are designed specifically for use with this VIEWCAM. Battery pack life The battery pack has a limited service life. If the period of use becomes noticeably shorter with a normal charge, the - Sharp VL-AH130U | VLAH130U Operation Manual - Page 62
cover the opening. (A red mark will be exposed.) To record, slide the tab to open the opening. Cleaning • Many plastic parts are used in the VIEWCAM casing. Do not use thinner, benzene or other strong chemical cleaners. These may cause discoloration and damage to the casing. • Clean the casing with - Sharp VL-AH130U | VLAH130U Operation Manual - Page 63
DEMO MODE O F F L ANGUA GE MENU button Operation buttons Watching the Demonstration 1 Make sure that there is no video cassette in the VIEWCAM. • If a cassette is in the VIEWCAM, Demo mode does not work. Perform the procedure on page 10 to remove it. 2 Hold down the Lock button and slide the - Sharp VL-AH130U | VLAH130U Operation Manual - Page 64
service, please check the following troubleshooting table. Power Symptom Possible cause Suggested solution No power. Power source is not properly connected. Connect power source properly (pp. 7, 9). Battery pack is not charged. Charge battery pack sufficiently (p. 8). Dew in VIEWCAM Manual - Sharp VL-AH130U | VLAH130U Operation Manual - Page 65
desired point (p. 21). Video noise in image. Dirty video heads. Call for service (p. 57). Old or worn tape. Use a new cassette. Cassette will not (p. 49). Lens makes rattling Does not indicate a malfunction. sound when VIEWCAM is moved in VCR mode or with power off. -- Remote control does - Sharp VL-AH130U | VLAH130U Operation Manual - Page 66
Specifications VIEWCAM Signal System: NTSC standard Recording System: 2 rotary heads, helical scanning system Cassette: 8 mm video tape, MP type or Hi8 MP, to change without notice. SERVICE INFORMATION (For the U.S.) For the location of the nearest Sharp Authorized Service, or to obtain product - Sharp VL-AH130U | VLAH130U Operation Manual - Page 67
La batería podría caerse. • No exponga la puerta del compartimiento de la batería a una fuerza excesiva porque podría desprenderse. • Utilice solamente baterías SHARP modelo BT-H22 o BT-H32 con esta VIEWCAM. La utilización de otras baterías puede causar un riesgo de incendio o explosión. 58 - Sharp VL-AH130U | VLAH130U Operation Manual - Page 68
. Interruptor de alimentación Indicador CHARGE 1 Inserte la batería en la VIEWCAM (consulte la página 58). Asegúrese de que el interruptor de Notas: • Los procedimientos de operación de las secciones siguientes de este manual de operación se basan en el uso de visualizaciones en pantalla en ingl - Sharp VL-AH130U | VLAH130U Operation Manual - Page 69
los dedos en el portavideocasete. • No aplique fuerza al portavideocasete, excepto cuando presione la marca PUSH para cerrarlo. • No incline la VIEWCAM ni la tome al revés cuando inserte o extraiga un videocasete. Esto podría estropear la cinta. • Extraiga el videocasete si no piensa utilizar - Sharp VL-AH130U | VLAH130U Operation Manual - Page 70
con videocámara en el modo completamente automático Antes de empezar a grabar, realice las operaciones descritas en las páginas 58 a 60 para preparar su VIEWCAM para la grabación. Botón REC START/STOP Nota: • Cuando grabe al principio de una cinta, avance la cinta unos 15 segundos antes de empezar - Sharp VL-AH130U | VLAH130U Operation Manual - Page 71
Pulse el botón REW (C) (o FF [B]) para rebobinar (o avanzar rápidamente) la cinta hasta el punto deseado. REW P LAY FF STOP ST I LL Mientras la VIEWCAM está en el modo de vídeo, empuje el control de volumen hacia el lado ϩ o Ϫ para aumentar (Q) o disminuir (W) el volumen según sus preferencias. El - Sharp VL-AH130U | VLAH130U Operation Manual - Page 72
or otherwise. In no event shall Sharp be liable, or in any way Model Specific Section Your Product Model Number & Description: Warranty Period for this Product: Additional Item(s) Excluded from Warranty Coverage (if any): Where to Obtain Service: What to do to Obtain Service: VL-AH130U Camcorder
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
 |
 |
LIQUID CRYSTAL DISPLAY CAMCORDER
OPERATION MANUAL
MODEL
VL
-
AH130U
Important
Model No.:
Serial No.:
Please read this operation manual
carefully before using the VIEWCAM.
For assistance in reporting the theft or
loss of
this product, record on the line
below the
model number and serial number which
are located on the bottom of the unit.
Please retain this information.
•
See page 54 for use of Demo mode.
References
Preparation
Basic Operations
Playback
Useful Features
Operation Summary
Basic Operations
Camera Recording
Advanced Features
NTSC