Sharp VL-WD650U VLWD450U|VLWD650U Operation Manual

Sharp VL-WD650U Manual

Sharp VL-WD650U manual content summary:

  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 1
    References Preparation LIQUID CRYSTAL DISPLAY CAMCORDER MODEL VL-WD450U VL-WD650U OPERATION MANUAL Basic Operations Useful Features Advanced Features SmartMedia Card Features ;;;;;; Please read this operation manual carefully before using the VIEWCAM. Important For assistance in reporting
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 2
    Thank you for purchasing this camcorder from SHARP. The camcorder will enhance your home video enjoyment and allow you to capture those special moments. Please read this operation manual to familiarize yourself with the camcorder's features, so that you will get the most out of it. The video
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 3
    SHARP that this unit be used in full compliance with the copyright laws of the United States and that prior permission be obtained from copyright owners whenever necessary. NOTE The camcorder's LCD panel is a very high technology product with more than 61,000 (VL-WD450U)/close to 90,000 (VL-WD650U
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 4
    . This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 11. Power Sources-This product should be operated only from the type of power source indicated on the marking label
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 5
    normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other 21. Safety Check-Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 6
    Quick Operation Guide Please consult this operation manual further for details on these and other functions of your camcorder. Charging the Battery Pack 1 Connect the supplied power cord to the AC power socket on the AC adapter/ battery charger, and insert the AC plug
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 7
    Inserting a Mini DV Cassette 1 Attach the power source to the camcorder, then slide the cassette compartment door release and open the cassette compartment door. Inserting a SmartMedia Card 1 Make sure that the power switch is set to
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 8
    Quick Operation Guide Easy Camera Recording on Tape 1 Make sure that a cassette is Press the LCD monitor OPEN release button (1), and open the LCD monitor to a 90° angle to the camcorder body (2). LCD monitor OPEN release button 90 Lock button 5 Press the REC START/STOP button to begin recording
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 9
    and set the Power switch to CAMERA. 1 Press the LCD monitor OPEN release button (1), and open the LCD monitor to a 90° angle to the camcorder body (2). LCD monitor OPEN release button 90 Lock button 5 Press the STILL button to begin recording. AUTO CARD 2 Adjust the LCD monitor to an angle
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 10
    microphone RMICC0098TAZZ Windscreen *1 The part numbers for the AC adapter/battery charger and battery pack supplied with this camcorder are valid only in the U.S. and Latin America. If this camcorder was purchased outside of these areas, the part numbers may be different. Please refer to the part
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 11
    BT-L441n Zoom microphone VR-5MCN Note: The listed model names are for U.S. accessories. For optional and additional accessories, contact your local dealer, call the Sharp Accessories and Supply Center at 1-800-642-2122, or visit
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 12
    . • Some small, portable tripods may be difficult to attach and may not be sturdy enough to support your camcorder. Be sure to use only a strong, stable tripod. • When using your camcorder in a cold environment, the LCD monitor screen often appears less bright immediately after the power is turned
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 13
    Battery Power Display 22 Playback Tape Playback 23 Volume Control 23 Watching the Playback on a TV 24 Video Search 25 Still 25 Selecting the Camcorder Mode 26 Using the Controls 27 Selecting the User Mode 28 Using the Menu Screens 29 Camera Recording Recording in LP (Long Play Recording
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 14
    the Remote Control 43 Playback Playback Functions with the Remote Control ......... 45 Using the Time Code 46 Camera Recording Manual Focus 47 Setting the Shutter Speed 49 Manual Exposure 51 White Balance Lock 52 Digital Picture Effects 53 Scene Menu (Program AE 54 Using the Zoom Microphone
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 15
    82 Print Order 83 Transferring the Data on a SmartMedia Card to a Computer 85 Appendix Useful Information 86 Demonstration Mode 93 Before Requesting Service 94 Specifications 96 • Guía de operación rápida en español 97 • Visualizaciones en pantalla en español 101 • Affichages sur écran en
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 16
    Operation References OOpepraetironaRteifoernencReseferences Part Names For details on the use of each part, refer to the page number indicated in brackets. Left view GAMMA/BRIGHTER button [pp. 33, 34, 61] W/B (White Balance) button [p. 52]/ IR (Infrared) LIGHT button [p. 35] SUPER CAT'S EYE
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 17
    Operation References Left view Viewfinder [p. 18] Zoom microphone mounting hole [p. 55] LCD monitor [p. 19] LCD monitor OPEN release button [p. 19] Lithium battery compartment door [p. 13] Diopter adjustment [p. 18] Power source PUSH release button [pp. 10, 11] Power source mounting surface [
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 18
    Operation References Operation References Right view S-VIDEO socket [pp. 24, 65, 66] STILL button [pp. 39, 40, 61, 74] Power Zoom Wide angle/ Telephoto control [p. 21]/ VOLume control [p. 23] VIDEO jack [pp. 24, 65, 66] AUDIO L jack [pp. 24, 65, 66] AUDIO R jack [pp. 24, 65, 66] Shoulder strap
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 19
    (Letting the Subject Monitor the Shot) • To focus on an off-centered subject. - See page 47 (Manual Focus) • To turn off the confirmation sounds which are made when you operate the camcorder. - See page 56 (Setting the Confirmation Sounds) • To enlarge any part of the picture during playback. - See
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 20
    the page number indicated. TAPE-CAMERA mode AUTO pp. 20, 28 p. 31 p. 20 MANUAL SE T MAN. FOCUS SHUT. SPE ED E XPOSURE P I C. EFFECT SCE NE MENU F. WI ND SOUND D I SPLAY p. 37 p. 36 p. 39 p. 40 p. 56 p. 56 p. 16 MANUAL SE T MAN. FOCUS SHUT. SPE ED E XPOSURE P I C. EFFECT SCE NE MENU FADE QK. RE
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 21
    74 AUTO p. 22 CARD p. 74 NORMA L p. 75 10 90 Easy mode (p. 28) ME NU SE L F T I ME R RE C MODE SOUND D I SPLAY p. 76 p. 75 p. 56 p. 16 MANUAL SE T MAN. FOCUS SHUT. SPE ED E XPOSURE P I C. EFFECT SCE NE MENU SE L F T I MER DIS CAMERA SE T RE C MODE SNAP EFF. DG T L ZOOM OTHERS REMOT E F ORMA
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 22
    10 seconds after this warning appears, the camcorder automatically turns off. The video heads are clogged and should be cleaned (see page 92). The fluorescent lamp behind the LCD monitor is close to the end of its service life. Call your local authorized Sharp dealer to have it replaced. When the
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 23
    page 80). MEMORY CARD READ ERROR The selected image cannot be read by this camcorder. Format the card to use it with this camcorder (see page 77). CANNOT STORE DAT A The SmartMedia card cannot record any data due to a problem with the card or data on the card. Replace the SmartMedia card (see
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 24
    guide the battery into the groove. Pressing the battery (2), slide it in the direction of the arrow (3) until it locks into place. • The CHARGE indicator lights up. Charging time and maximum continuous recording and playback times in TAPE modes Model Battery pack Charging time VL-WD450U VL-WD650U
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 25
    card, rendering it unreadable and unwritable. • Remove the battery pack from the camcorder if you will not use the camcorder for a long period of time. • Use only SHARP model BT-L221 or BT-L441 battery packs with this camcorder. Use of other batteries may present a risk of fire or explosion. 10
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 26
    outlet. • The POWER indicator on the AC adapter lights up, and the camcorder is supplied power. DC OUT jack POWER indicator To power outlet 3 Align side of the DC cable connecting plate with the q mark on the camcorder (1), and slide the connecting plate down completely until it locks into place
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 27
    cassette holder except when pressing the W mark to close it. • Do not tilt the camcorder or hold it upside down when you are inserting or removing a cassette. It may the insertion procedure. • Do not attempt to pick up the camcorder by the cassette compartment door. Notes: • If the battery power
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 28
    up the battery using a pointed object, and take it out. Note: • Replace the battery with a new CR2025 lithium battery when the time indicator of the camcorder starts to fall behind the correct time. 2 Open the lithium battery compartment door using the tip of a ballpoint pen or other pointed object
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 29
    Preparation Selecting the Language for the On-screen Display This camcorder allows you to choose from among English, French or Spanish for the onscreen display language. Note: • The operation procedures in the following sections of this operation manual are based on the use of on-screen displays in
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 30
    Preparation Setting the Area, Date and Time Example: Setting the date to June 2, 2002 (JUN. 2. 2002) and the time to 10:30 am (10:30 AM) in New York. Notes: • Before performing the procedure below, make sure that the lithium battery has been installed (see page 13). • If you are in an area that
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 31
    Preparation 9 Press d or y to select "2002" (year), and then press r. SE TT I NG JUN. 2. 2002 1 2 : 0 0 AM 10 Press d or y to select "10 AM" (hour), and then press r. SE T T I NG JUN. 2. 2002 1 0 : 0 0 AM 11 Press d or y to select "30" (minute), and then press e. • The internal clock now
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 32
    the grip strap and the hand strap flap. Caution: • Do not swing the camcorder by the hand strap. Using the Lens Cap Attach the strap of the lens cap the way. Note: • Always replace the lens cap on the lens when the camcorder is not in use. Attaching the Shoulder Strap 1 Remove the battery pack. 2
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 33
    excessive force when moving the viewfinder. • Do not pick up the camcorder by the viewfinder. Power switch 1 Lift up the viewfinder. Note: • You can raise the viewfinder to aim the camcorder better depending on your position. 2 Hold down the Lock button and set the
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 34
    easy viewing on the on-screen picture. • The LCD monitor rotates 270° vertically. 180 90 Note: • You can also fold the LCD monitor into the camcorder with the screen facing out for watching playback on the monitor. Cautions: • Do not use excessive force when moving the LCD monitor. • Do not try
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 35
    If "MANUAL" is displayed at this time, press the AUTO ON/OFF button to set the camcorder to camcorder will make a confirmation sound when it is left in Recording Standby mode for about 4 minutes.) Maximum continuous recording and actual recording times in TAPECAMERA mode Model VL-WD450U VL-WD650U
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 36
    angle Put your right hand through the hand strap, and Tele- place your left hand under the camcorder for photo support. Zooming out (when you want to show the surroundings) To zoom in Push the Power Zoom control to the T (telephoto) side to get a close-up
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 37
    in TAPE-CAMERA mode, press the MENU/DISPLAY button until the remaining recording time indicator appears. Remaining Battery Power Display When using the camcorder with the battery pack as the power source, you can turn on and off the remaining battery power indicator by pressing the MENU/DISPLAY
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 38
    with the screen facing in. You cannot monitor the sound through the speaker when watching the playback in the viewfinder. Volume Control When the camcorder is in TAPE-VCR mode, push the Volume control to the L or + side to increase (1) or decrease (2) the volume. The volume level indicator will
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 39
    as you normally do to see the signal from the VCR. (See the operation manuals of your TV and VCR.) 4 Set the Power switch on the camcorder to VCR, and begin playback (see page 23). Jack cover 2 Connect the camcorder to your TV (or VCR) with the supplied audio/video cable, as shown
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 40
    search. This is not a malfunction. To return to normal playback, press y again. Notes: • The sound is off in Still mode. • To protect the tape, the camcorder automatically returns to normal playback if it is left in Still mode for more than 5 minutes. Basic Operations 25
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 41
    switch to CAMERA. 2 Hold down the Lock button and set the Power switch to VCR. Lock button Lock button Caution: • Do not change the camcorder mode by operating the Media Selection switch during recording or playback, as this may cause damage to the tape or SmartMedia card. Useful Features 26
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 42
    Features Using the Controls The following controls on the camcorder can be used to select and operate the various the power on, hold down the Lock button and set the Power switch to CAMERA or VCR. Menu screen MANUAL SE T MAN. FOCUS SHUT. SPE ED E XPOSURE P I C. EFFECT SCE NE MENU FADE QK. RE
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 43
    the User Mode This camcorder features three user modes for the camera recording functions. The selectable items on the menu screen are different depending on the user mode. User mode Auto mode (AUTO): Lets you adjust all menu settings except manual settings. Manual mode (MANUAL): Lets you adjust all
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 44
    or VCR. Lock button 3 Press the MENU/DISPLAY button until the menu screen appears. MANUAL SE T MAN. FOCUS SHUT. SPE ED E XPOSURE P I C. EFFECT SC E Press the MENU/DISPLAY button. Notes: • Certain menu items are common among Camcorder modes. If the REMOTE menu item, for example, is set to "OFF"
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 45
    recording time with the same picture quality as that in SP (Standard Play Recording) mode. 1 Set the camcorder to TAPE-CAMERA mode. 2 Press the MENU/DISPLAY button until the menu screen appears. MANUAL SE T MAN. FOCUS SHUT. SPE ED E XPOSURE P I C. EFFECT SC E NE MENU FADE QK. RE TURN DIS 3 Select
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 46
    audio recording, select the 16-bit audio recording mode. 1 Set the camcorder to TAPE-CAMERA mode. 2 Press the MENU/DISPLAY button until the menu T, then press r on the Operation button. Select "DIS" (1), then press r (2). MANUAL SE T MAN. FOCUS SHUT. SPE ED E XPOSURE P I C. EFFECT SCE NE MENU
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 47
    is enlarged digitally, the picture quality decreases when higher digital zoom settings are used. 1 Set the camcorder to TAPE-CAMERA or CARD-CAMERA mode. 2 Press the MENU/DISPLAY button until the menu screen appears. MANUAL SE T MAN. FOCUS SHUT. SPE ED E XPOSURE P I C. EFFECT SCE NE MENU FADE QK. RE
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 48
    Useful Features Camera Recording Gamma Brightness Compensation When the subject is backlit, the image will appear dark if it is recorded normally. The gamma brightness compensation function improves the picture by increasing the brightness of the subject while leaving the brighter portion of the
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 49
    is displayed. • When the ` indicator is displayed, a residual image may appear behind a subject that exhibits a lot of movement. • Fine brightness adjustment is possible using the manual exposure function (see page 51). AUTO GAMMA L I GHT Useful Features 34
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 50
    may not be able to focus correctly when using Night Recording. In such cases, use the manual focus function to obtain proper focus (see page 47). • Infrared light emitted from the camcorder illumines an area up to about 10 feet (3 m) away. • The following functions do not work when using Night
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 51
    r on the Operation button. Select "QK. RETURN" (1), then press r (2). MANUAL SE T MAN. FOCUS SHUT. SPE ED E XPOSURE P I C. EFFECT SCE the end of the last recorded scene, "FINISHED" is displayed, and the camcorder enters Recording Standby mode. 5 Press the MENU/DISPLAY button to turn off the
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 52
    scenery. Fade in FADE Fade out Setting Fade Mode 1 Set the camcorder to TAPE-CAMERA mode. 2 Press the MENU/DISPLAY button until the Select T, then press r on the Operation button. Select "FADE" (1), then press r (2). MANUAL SE T MAN. FOCUS SHUT. SPE ED E XPOSURE P I C. EFFECT SCE NE MENU
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 53
    and bottom portions masked. To return to normal screen Select "OFF" in step 4 above. Notes: • You can only use the wide screen function when the camcorder is in TAPE-CAMERA mode. • Each frame picture will not be displayed in Wide Screen mode when a still recording effect is set during Wide Screen
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 54
    SPEED 16 : 9 To pause recording Press the REC START/STOP button. To cancel the still image In SNAP mode, press the STILL button while the camcorder is in Recording Standby mode. In STILL mode, press the STILL button. Notes: • Still Recording can also be used during recording by pressing the STILL
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 55
    using a 16-frame picture. Selecting a still recording effect 1 Set the camcorder to TAPE-CAMERA or CARD-CAMERA mode. 2 Press the MENU/DISPLAY button in TAPECAMERA mode In SNAP mode, press the STILL button while the camcorder is in Recording Standby mode. In STILL mode, press the STILL button
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 56
    Useful Features Camera Recording Using P-IN-P mode 1 Perform the steps in "Selecting a still recording effect" to select "P-IN-P" (see page 40). 2 In Recording Standby mode, press the STILL button. • An inset image of the subject is displayed. AUTO • To change the position of the inset image, press
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 57
    vertically so that the screen faces the other way and the subject can monitor the shot while you are recording with the viewfinder. If the camcorder is steadied, you can record yourself in the scene by watching yourself on the LCD monitor. The supplied remote control is useful for such occasions
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 58
    out until a subject comes into the frame. • Auto Focus may not work in the situations described on page 47. In these situations, use the manual focus function. Use the supplied remote control to operate the camcorder from a distance, such as when you want to record yourself in a scene, or when the
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 59
    rotate it 180° vertically (2). 180 90 2 Set the Media Selection switch on the camcorder to TAPE or CARD. 3 Set the Power switch on the camcorder to CAMERA or VCR. 4 Aim the remote control at the remote sensor of the camcorder, and press the control buttons for operation. REW button [pp. 23, 78
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 60
    button (f). To view slow playback in reverse, press the j button. To return to normal playback, press the PLAY button (t). Note: • To protect the tape, the camcorder automatically returns to normal playback if it is left in Slow mode for more than 10 minutes. Useful Features 45
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 61
    Using the Time Code The time code shows the hour, minute and second of recording, and the frame number (1 frame = approx. 1/30 sec.). This is automatically recorded along with the subject when you are recording on the tape. You can display the time code on the screen as an accurate counter in both
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 62
    Auto Focus may not be able to focus on the subject in the situations shown below. In such situations, set the camcorder to Manual Focus mode and focus manually. Subject is too dark. Lack of contrast, e.g. snow scene. Fast-moving subject. Background is too bright. Subject has horizontal stripes
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 63
    (1.8 m). Set the zoom control to wide angle, and then try refocusing. • If the lens is dirty or fogged, the camcorder may not be able to correctly focus. • When "MF" is displayed, you can manually adjust the focus by pressing d or y, even if the focus setting screen is not displayed. • When you want
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 64
    on the subject or situation, you may want to set the shutter speed manually to create a high-quality picture. 1 Set the camcorder to TAPE-CAMERA or CARD-CAMERA mode. 2 Press the AUTO ON/OFF button to select Manual mode. 3 Press the MENU/DISPLAY button until the menu screen appears. 4 Select T, then
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 65
    shutter speed setting cannot be used with Night Recording. • When you want to cancel all manual settings and return to Auto mode, press the AUTO ON/OFF button. Tips on Using the Manual Shutter Speed • Fast shutter speeds can be used with the still recording function (see page 39) to record higher
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 66
    bright against background. • Decrease the exposure level to allow less light through the lens. 1 Set the camcorder to TAPE-CAMERA or CARD-CAMERA mode. 2 Press the AUTO ON/OFF button to select Manual mode. 3 Press the MENU/DISPLAY button until the menu screen appears. 4 Select T, then press r on the
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 67
    -up images of small objects Note: • White Balance Lock cannot be set when the camcorder is in Easy mode or the SUPER CAT'S EYE switch is set to ON. W/B the white balance may shift. Reset the white balance. • Do not move the camcorder while "W/B LOCK" is flashing in step 4. • If "W/B LOCK" does not
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 68
    blacks and whites of the image are reversed and colors of the image are inverted. 1 Set the camcorder to TAPE-CAMERA or CARD-CAMERA mode. 2 Press the MENU/DISPLAY button until the menu screen appears. MANUAL SE T MAN. FOCUS SHUT. SPE ED E XPOSURE P I C. EFFECT SC E NE MENU FADE QK. RE TURN DIS
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 69
    and the surrounding twilight. PARTY: When the illumination is from a spotlight or candles. 1 Set the camcorder to TAPE-CAMERA or CARD-CAMERA mode. 2 Press the MENU/DISPLAY button until the menu screen appears. MANUAL SE T MAN. FOCUS SHUT. SPE ED E XPOSURE P I C. EFFECT SC E NE MENU FADE QK. RE TURN
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 70
    record only sounds at a distance. Mounting the Zoom Microphone 1 Align the mounting pin of the zoom microphone with the mounting hole on the camcorder, and slide the zoom microphone in the direction of the arrow until it locks into place. Mounting hole Selecting Zoom Microphone Mode Select a Zoom
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 71
    Windbreak The windbreak function allows you to reduce annoying noise from strong winds when recording. 1 Set the camcorder to TAPE-CAMERA mode. 2 Press the MENU/DISPLAY button until the menu screen appears. 3 Select U, then press r on the Opera- tion button. Select "WIND" (1), then
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 72
    Advanced Features Camera Recording World Clock The world clock function allows you to easily adjust the clock to the local time when you use the camcorder while travelling anywhere around the world. • Set the area, date and time for your home time zone if they have not already been set (see
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 73
    Area Table Area number Area name Countries or areas* 1 LONDON England, Morocco, GMT (Greenwich mean time) 2 PARIS Austria, France, Germany, Italy, Netherlands, Spain, Sweden, Switzerland, Portugal, CST (Continental Standard Time), Tunisia 3 CAIRO Egypt, Finland, Greece, Turkey 4 MOSCOW
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 74
    below to advance the clock of the camcorder one hour to daylight saving time. 1 Set the camcorder to TAPE-CAMERA or CARD-CAMERA 0 0 2 1 0 : 3 0 AM 2 Press the MENU/DISPLAY button until the menu screen appears. MANUAL SE T MAN. FOCUS SHUT. SPE ED E XPOSURE P I C. EFFECT SCE NE MENU FADE QK. RE TURN
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 75
    Advanced Features Playback Playback Zoom The playback zoom function allows you to magnify the playback picture up to 10 times its original size and to shift the magnified picture by using the remote control (see pages 43 and 44 for use of the remote control). ZOOM buttons To cancel Playback Zoom
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 76
    Advanced Features Playback Gamma Playback Multiple Strobe Playback The gamma playback function improves the playback picture in TAPE-VCR mode by increasing the brightness of the subject while leaving the brighter portions of the image unaffected. GAMMA/BRIGHTER button During playback in TAPE-VCR
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 77
    Playback Effects Playback effects can be used to create an interesting scene transition between a still image and the following image during playback in TAPE-VCR mode. Type of Playback Effects OVERLAP: A still image fades out as the next image fades in, replacing the previous image. The two scenes
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 78
    Advanced Features Playback Picture Effect Playback These picture effects let you play back images with a more dramatic effect. Type of Picture Effects B/W: The picture is displayed in black-andwhite. SEPIA: The picture is displayed in sepia color similar to that of an old photograph. MOSAIC*: The
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 79
    on the viewfinder when adjusting the "VF BRIGHT". 5 Press e, then press the MENU/ DISPLAY button to turn off the menu screen. AUTO: The camcorder automatically switches between "NORMAL" and "BRIGHT" depending on the ambient lighting. This mode is only available in TAPE-CAMERA or CARD-CAMERA mode
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 80
    S-video cable for the video connection. (The yellow video plug does not need to be connected to the VCR.) To stop editing Press d on the camcorder and press the Stop button on the VCR. Notes: • Some of the transitions between edited sequences may be slightly off. • There may be picture noise
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 81
    1 and 2 above, and press the TAPE REC START/ STOP button, then press the PAUSE/STILL button (g). • If "NO SIGNAL" is displayed on the camcorder screen, check that the S-video cable or audio/ video cable is properly connected. To stop recording To S-video output socket Press d on the Operation
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 82
    if the DV cable is properly connected and you are playing back the source media from the video equipment, set the Power switch on the camcorder to OFF and then back to VCR, or disconnect the DV cable and connect it again. • If a digital video recording with a copyright protection signal is
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 83
    Audio Dubbing Feature You can add narration to recordings made with this camcorder, while preserving the original audio and video recordings. Microphone for Audio Dubbing You can use the built-in stereo microphone to record narration. Built-in
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 84
    cannot be used with record- ings made in LP mode. • It is recommended that you use Audio Dubbing only with recordings made with this camcorder. Use of recordings made with other digital video equipment may result in poor audio quality. • Audio dubbing will automatically pause if the original audio
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 85
    Selecting the Audio Playback Mode You can select any of the following audio playback modes. Audio 1+2 • 12-bit recording in stereo (Audio 1 and Audio 2 channels) • 16-bit recording in stereo (left and right channels) Audio 1 • 12-bit recording in stereo (Audio 1 channel only) • 16-bit recording in
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 86
    the camcorder to a Personal Computer 1 Turn off the PC. 2 Connect the camcorder as shown below. • Before connecting the camcorder to ROM" drive icon. 5 Double click on the "Setup.exe" file. 6 Follow the instructions as they appear on the PC monitor until the installation is complete. 7 Restart the
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 87
    click on the "Acroread" folder. 5 Double click on the desired language version. 6 Follow the instructions as they appear on the PC monitor until the installation is complete. 7 Restart the PC. Opening the PDF Manual 1 Insert the CD-ROM of the Video Capture Software into the CD-ROM drive. 2 Double
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 88
    will go. Notes: • The supplied SmartMedia card is preformatted for immediate use. • Be sure not to apply pressure to the card slot cover, as the camcorder may not record the still image properly. SmartMedia Card Features Chipped corner Contact area 73
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 89
    returns to white when recording completes. STILL button Power Zoom control AUTO CARD 10 90 Power switch 1 Insert a SmartMedia card into the camcorder. 2 Remove the lens cap, and lift up the viewfinder. 3 Set the Media Selection switch to CARD. Notes: • Recording under insufficient lighting may
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 90
    SmartMedia Card Features Camera Recording Selecting the Picture Resolution The picture quality of still images recorded on the SmartMedia card depends on the resolution setting. Select the appropriate setting to match the purpose of recording. Type of resolution settings NORMAL: Records images with
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 91
    . 1 In CARD-CAMERA mode, press the MENU/DISPLAY button until the menu screen appears. MANUAL SE T MAN. FOCUS CARD SHUT. SPE ED E XPOSURE P I C. EFFECT SC 10 90 Notes: • When recording with the self-timer, stabilize the camcorder in the horizontal plane by attaching it to a tripod, etc. •
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 92
    outlet for the power supply. 1 Insert a SmartMedia card to be format- ted into the camcorder. 2 Set the camcorder to CARD-CAMERA mode. 3 Press the MENU/DISPLAY button until the menu screen appears. MANUAL SE T MAN. FOCUS CARD SHUT. SPE ED E XPOSURE P I C. EFFECT SCE NE MENU SE L F T I MER
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 93
    SmartMedia Card Features Playback Card Playback It is possible to play back and view still images recorded on a SmartMedia card on the LCD monitor. Media Selection switch Power switch 4 Press e or r on the Operation button to move the selection frame to the desired image. • Each time you press e
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 94
    in step 2, the recorded images will be displayed in full-screen one after another in order of recording. SL I DE SHOW CARD 1 Set the camcorder to CARD-VCR mode. 2 Press e or r to select the image from which you want to begin slide show playback. CANCEL [ BUT TON] 1 2 3 4 5 6 After playing
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 95
    Delete-protection It is possible to prevent your important images recorded on the SmartMedia card from being accidentally erased. 1 In CARD-VCR mode, press the MENU/ DISPLAY button until the menu screen appears. 2 Select S, then press r on the Operation button. Select "PROTECT" (1), then press r
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 96
    SmartMedia Card Features Playback Deleting One Stored Image You can delete unwanted images to free up memory of a SmartMedia card for new images. 4 Press y to set the image. • To cancel deletion, press d. DEL E T E Note: • Deleted images cannot be restored. Check whether or not you want the
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 97
    Deleting All Stored Images You can delete all images stored on a SmartMedia card in one operation. Notes: • Deleted images cannot be restored. Check whether or not you want the images before performing the procedure below. • If you want to keep some images on the SmartMedia card, first delete-
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 98
    the future, it will be possible to easily print still images using the DPOF feature when you use a DPOF-compatible printer or visit a shop with a service for printing DPOF images. Notes: • It is possible to print an image even if no print order has been assigned. • You cannot assign a print
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 99
    6 Press y to set the print order, then press d. • The M indicator appears. • If you want to assign another print order, repeat steps 4 to 6. Print order indicator 1 2 3 Assigning Print Order to All Images 1 Perform steps 1 and 2 in "Assigning Print Order to an Image". 2 Press d or y (1) to
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 100
    card adapter. Image Folders and File Names Still images recorded using the camcorder are stored on a SmartMedia card as shown below. DCIM Folder of still card to a PC card adapter. • For details, see the operation manuals of the computer, floppy disk adapter, and PC card adapter. DVC00001.JPG DVC00002
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 101
    the picture quality may suffer. Adequate lighting is also essential for correct white balance. Brightness (Lux) Situation (Lux) Position the subject in Focus manually when you the center. need to position the subject off center (see pages 47 and 48). • Avoid backlit subjects. For the best
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 102
    times the color resolution of conventional VCRs (based on Sharp models). Clear images with virtually no distracting color contamination cassette and the larger DV cassette used for extended playback and recording. This camcorder only operates with Mini DV cassettes. DV cassettes cannot be used. Be
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 103
    Mini DV cassette to the "SAVE" position. Precautions when using a Mini DV cassette • Be sure to use only Mini DV cassettes with the i mark. • This camcorder can record and play back using Mini DV cassettes with cassette memory, but it cannot record or play back this memory. • To record in LP
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 104
    ™ Card Contact area Index area Write-protect area SHARP Index labels Write-protect seals Contact area • The a write-protect seal is affixed to the card. • Always format cards on this camcorder. This camcorder may not recognize the data on cards formatted on your computer. Write-protect seals •
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 105
    camcorder power is turned off. If you are not going to use your camcorder immediately, remove the battery pack (see page 10). Note: • Use only SHARP is not a malfunction. • The battery pack has a limited service life. If the period of use becomes noticeably shorter with a normal charge, the battery
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 106
    How to prevent trouble due to dew formation. When using the camcorder in a place where dew formation is likely to occur, allow the camcorder and the video nearest SHARP service center or your dealer for further advice. Plastic bag 1 Be sure to tightly seal the plastic bag containing the camcorder.
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 107
    screen. Contact the nearest SHARP service center or your dealer for further advice. Cleaning • Many plastic parts are used in the camcorder casing. Do not however, may cause damage to the video heads. Please read the instructions accompanying the cleaning tape carefully before using it. • The fast
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 108
    in English. Watching the Demonstration 1 Remove the Mini DV cassette from the camcorder (see page 12), and set the SUPER CAT'S EYE switch to OFF. to CAMERA. Lock button 3 Press the MENU/DISPLAY button until the menu screen appears. MANUAL SE T MAN. FOCUS SHUT. SPE ED E XPOSURE P I C. EFFECT SCE NE
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 109
    service, please check the following troubleshooting table. Power Symptom Possible cause Suggested solution No power. Power source is not properly connected. Connect power source properly (pp. 10, 11). Battery pack is not charged. Charge battery pack sufficiently (p. 9). Dew in camcorder
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 110
    desired point (p. 23). Video noise in image. Dirty video heads. Call for service (p. 96), or use a commercially available video head cleaning tape (p. 92). Old pack is not charged. Charge battery pack sufficiently (p. 9). Camcorder is recording. Stop tape and try again (p. 20). Viewfinder
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 111
    Specifications Camcorder Signal viewfinder in Full Auto mode with zoom motor off) 4.8 W (VL-WD450U)/5.1 W (VL-WD650U) (during camera recording using the LCD monitor in Full Auto without notice. SERVICE INFORMATION (For the U.S.) For the location of the nearest Sharp Authorized Service, or to obtain
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 112
    GGuuía ídae odpeeracoiónpreápridaacenióesnpañroál pida en español Carga de la batería 1 Conecte el cable de alimentación suministrado al zócalo de alimentación de CA del adaptador de CA/cargador de baterías, y enchufe la clavija de CA en una toma de corriente. Conexión de la alimentación
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 113
    Inserción de un minivideocasete DV Inserción de una tarjeta SmartMedia 1 Coloque la fuente de alimentación en la 1 Asegúrese de que el interruptor de videocámara, y luego deslice el control alimentación esté en OFF. de abertura de la puerta del compartimento del videocasete y abra la 2 Abra el
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 114
    Guía de operación rápida en español Grabación fácil con la videocámara en una cinta 1 Asegúrese de que se encuentre insertado un casete. 2 Quite la tapa del objetivo y levante el visor. 3 Ponga el conmutador selector de medio en TAPE. 4 Mantenga pulsado el botón de bloqueo y ponga el interruptor de
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 115
    Grabación con tarjeta Reproducción de tarjeta 1 Asegúrese de que se encuentre insertado una tarjeta SmartMedia. 2 Quite la tapa del objetivo y levante el visor. 3 Ponga el conmutador selector de medio en CARD. 1 Pulse el botón de abertura del monitor LCD (OPEN) (1) y abra el monitor LCD de manera
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 116
    VOni-sscureeanlDizisaplacyisoinnOethser Leanngupagae ntalla en español Cuando se selecciona "ESPAÑOL" como idioma de la visualización en pantalla aparecen las siguientes visualizaciones indicadas a continuación. Modo TAPE-CAMERA AU TOM. AJ UST E MAN. E NFO. MANU. VEL. OBTURA EXPOS I C I ÓN E F .
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 117
    Modo CARD-CAMERA AU TOM. AJ UST E MAN. TARJ E NFO. MANU. TARJ VEL. OBTURA EXPOS I C I ÓN E F . IMAGE N MENÚ E SCE. AUTOD I SPA. 10 90 DIS AU TOM. NORMA L TARJ 10 90 Modo fácil (FÁCIL) ME N Ú AUTOD I SPA. MODO GRABA SON I DO V I SUAL I . Modo CARD-VCR 1 2 3 4 5 6 AJUST E REPRO
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 118
    AOnf-sfcirceehnaDigspelasys isn uOtrheér Lcanrgaunageen français Les affichages sur écran suivants apparaissent lorsque "FRANÇAIS" est sélectionné pour la langue de l'affichage. Mode TAPE-CAMERA AUTO RE GL . MANUE L FOCUS MAN. V I T. OBTUR EXPOS I T I ON MENU I MAGE MENU SCENE F ONDU RE TOUR DIS
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 119
    Mode CARD-CAMERA AUTO REGL. MANUE L CARTE FOCUS MAN. CARTE V I T. OBTUR EXPOS I T I ON MENU I MAGE MENU SCENE RE TARDAT. 10 90 DIS AUTO NORMA L CARTE 10 90 Mode facile (FACILE) ME NU RE TARDAT. MODE ENREG SON AFF I CHAGE Mode CARD-VCR 1 2 3 4 5 6 REGLE. LECT PRES. D I APO
  • Sharp VL-WD650U | VLWD450U|VLWD650U Operation Manual - Page 120
    on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or Product Model Number & Description: VL-WD450U/VL-WD650U Camcorder (Be sure to have this information available when you need service for your Product.) Warranty
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120

LIQUID CRYSTAL DISPLAY CAMCORDER
OPERATION MANUAL
MODEL
VL
-
WD450U
VL
-
WD650U
Important
Model No.:
Serial No.:
Please read this operation manual
carefully before using the VIEWCAM.
For assistance in reporting the theft or
loss of
this product, record on the line
below the
model number and serial number which
are located on the bottom of the unit.
Please retain this information.
• See page 93 for use of Demo mode.
• The images of the VIEWCAM in this
operation manual are based upon the
VL-WD450U.
Appendix
Preparation
Useful Features
Operation References
Basic Operations
Advanced Features
SmartMedia Card
Features