Sharp VLAH150U Operation Manual - Page 18
Powering the VIEWCAM from, an AC Outlet - camcorder
UPC - 074000352735
View all Sharp VLAH150U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Preparation Preparation Powering the VIEWCAM from an AC Outlet Caution: • The supplied AC adapter is specially designed for use with this VIEWCAM, and should not be used as a power supply for other camcorders. Cautions: • BEFORE REMOVING THE DC PLUG, ALWAYS STOP THE TAPE AND TURN THE POWER OFF. If you remove the DC plug during recording or playback, the tape will remain wound around the video head drum, potentially causing damage to the tape. • Remove the DC plug from the VIEWCAM if you will not use the VIEWCAM for a long period of time. • When removing the plugs, grasp the plug, not the cable. Note: • Close the terminal cover after use. Power switch 1 Insert the AC plug of the AC adapter into a power outlet. 2 Make sure that the Power switch is set to OFF. 3 Open the terminal cover and insert the DC plug of the AC adapter into the DC IN jack on the VIEWCAM. Terminal cover DC IN jack To power outlet 4 Hold down the Lock button and slide the Power switch to CAMERA or VCR. Lock button 9