Sharp XG-E3500U XG-E3500U Operation Manual
Sharp XG-E3500U Manual
 |
View all Sharp XG-E3500U manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp XG-E3500U manual content summary:
- Sharp XG-E3500U | XG-E3500U Operation Manual - Page 1
No.: XG-E3500U Serial No.: Important Information There are two important reasons for prompt warranty registration of your new SHARP LCD Projector, using the REGISTRATION CARD packed with the projector. 1) WARRANTY This is to assure that you immediately receive the full benefit of the parts, service - Sharp XG-E3500U | XG-E3500U Operation Manual - Page 2
basic rules for its installation, use and servicing. For your own protection and reliable usage of your LCD Projector, please be sure to read these "Important Safeguards" carefully before use. 1) Read Instructions - All the safety and operating instructions should be read before the product is - Sharp XG-E3500U | XG-E3500U Operation Manual - Page 3
need for service. 19) Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by CFR SUBCHAPTER J" SHARP ELECTRONICS CORPORATION SHARP PLAZA, MAHWAH, NEW JERSEY 07430 TEL : 1-800-BE-SHARP U.S.A. ONLY REMOTE CONTROL MODEL NO. : - Sharp XG-E3500U | XG-E3500U Operation Manual - Page 4
be sure to take your projector to the nearest Authorized Sharp Industrial LCD Products Dealer or Service Center to have the lamp replaced. Outstanding Features Allows easy projection of large screen, full-color computer and video images. • Can be projected directly onto a video screen or white wall - Sharp XG-E3500U | XG-E3500U Operation Manual - Page 5
Controls FRONT VIEW Speakers ON/OFF POWER POWER ON/OFF button Remote sensor POWER indicator Cooling fan (Exhaust vent) Carrying handle LAMP TEMP. LAMP REPLACEMENT indicator TEMPERATURE WARNING indicator Lamp cage cover (Natural ventilation) Cooling fan (Intake vent) Cautions: • The exhaust - Sharp XG-E3500U | XG-E3500U Operation Manual - Page 6
instrument. • Do not expose the remote control to shocks, liquids or high humidity. The remote control may not operate normally if exposed to direct sunlight or other intense light sources. Should this happen, reposition the light source or the LCD ADJ. label Projector. When you change the setting - Sharp XG-E3500U | XG-E3500U Operation Manual - Page 7
TEL : 1-800-BE-SHARP U.S.A. ONLY REMOTE CONTROL MODEL NO. : RRMCG1392CESA DC6V (1.5VX4PCS.) MADE IN JAPAN FABRIQUÉ AU JAPON Using the optional cable with the remote control • When the remote control cannot be used due to the range or positioning of the projector (rear projection, etc.), connect - Sharp XG-E3500U | XG-E3500U Operation Manual - Page 8
MAIN POWER switch of remote control LEFT-CLICK button LCD PROJECTOR • First, connect the units as shown above, and turn the projector power on. • SUBCHAPTER J" SHARP ELECTRONICS CORPORATION SHARP PLAZA, MAHWAH, NEW JERSEY 07430 TEL : 1-800-BE-SHARP U.S.A. ONLY REMOTE CONTROL MODEL NO. : - Sharp XG-E3500U | XG-E3500U Operation Manual - Page 9
projector placement. • See pages 10, 12 and 13 for details on projector setup. SIDE VIEW Zoom Ceiling setting Lens Shift Invert Image 2 ON/OFF POWER LAMP button on the remote control or on the projector is pressed, the until the picture on the screen is sharp. • The focus pattern appears on - Sharp XG-E3500U | XG-E3500U Operation Manual - Page 10
XG-E3500U with a picture size of 100 inches (254 cm). Move the projector forward or back if the edges of the image are distorted. Height of Projector m This projector shift position (High mount setup) Lower lens shift position (Desktop setup) • Ceiling Mount When the projector is in the inverted - Sharp XG-E3500U | XG-E3500U Operation Manual - Page 11
Using the Image Invert/Reverse Function s This projector is equipped with an image invert/reverse function. The projected image can be inverted or reversed by using the MENU button and the ADJUSTMENT / and / - Sharp XG-E3500U | XG-E3500U Operation Manual - Page 12
servicing and to maintain high image quality, SHARP recommends that this projector be installed in an area free from humidity, dust and cigarette smoke. When the projector is subjected to these environments, the lens and filter must be cleaned more often. Periodically the filter should be replaced - Sharp XG-E3500U | XG-E3500U Operation Manual - Page 13
ON OFF ¬ ON OFF ¬ TEMP. LAMP POWER ON/OFF POWER LAMP TEMP. ON/OFF Terminal Cover • When the projector is ceiling mounted, attach the terminal cover (supplied) to hide the connecting cables. • Use the terminal cover to hide the connecting cables when the projector is used on a desktop or high - Sharp XG-E3500U | XG-E3500U Operation Manual - Page 14
to approximately 5° from the horizontal. • When adjustments are made with the adjusters, the picture may become distorted, depending on the relative positions of the projector and the screen. • After adjusting, in some cases, all of the adjuster legs may not be resting on the table. To prevent the - Sharp XG-E3500U | XG-E3500U Operation Manual - Page 15
or DVD Player or to view on a separate monitor, make the following connections. • Always turn off the LCD Projector while connecting to video equipment, in order to protect both the projector and the equipment being connected. Used when the AV equipment to be connected has an SVIDEO output terminal - Sharp XG-E3500U | XG-E3500U Operation Manual - Page 16
can be checked. See pages 34 and 35 for details. • By connecting the projector mouse terminal to your personal computer's mouse terminal, using the supplied mouse control cables, you can use the remote control in place of the computer's mouse. Refer to page 8 for details. Notes: • The wireless - Sharp XG-E3500U | XG-E3500U Operation Manual - Page 17
RGB 1 input connector and the supplied RGB cable for Plug & Play. 1 Side view of the projector 1. Connecting to an IBM-PC (VGA, SVGA, INPUT1 COMPUTER RGB OUTPUT RGB mode cannot be changed even if the switches on the adaptor are reset. • The supplied adaptor is only for use with H-SYNC and - Sharp XG-E3500U | XG-E3500U Operation Manual - Page 18
the projector. 5 INPUT1 COMPUTER RGB OUTPUT Direct connection or External IBM-PC monitor Optional Macintosh adaptor cable U.S.A. or video input signal. To split the composite video signal, use a video distribution amplifier. This is available from your local dealer. The computer RGB output - Sharp XG-E3500U | XG-E3500U Operation Manual - Page 19
enable 5 BNC computer input. • Before connecting, be sure to turn both the projector and the equipment off. • Connect the R, G/G-SYNC, B, H/C-SYNC and V-SYNC cables to the correct input terminals on the projector and an RGB switcher (sold separately) connected to the computer, or connect a 5 BNC-VGA - Sharp XG-E3500U | XG-E3500U Operation Manual - Page 20
PORCH c dot VIDEO PERIOD d dot -projector for display on an (800 × 600) LCD LCD) mode. If this occurs, turn off the LCD display on the notebook computer and output the display data in "CRT only" mode. Details on how to change display modes can be found in your notebook computer's operation manual - Sharp XG-E3500U | XG-E3500U Operation Manual - Page 21
LCD pixels, causing flickering, vertical stripes, or contrast irregularities in portions of the screen. Should this occur, use the ADJUSTMENT / buttons for HORIZONTAL (LEFT/RIGHT) and VERTICAL (UP/DOWN) position adjustments to adjust for the optimum picture. RGB OFF] RESET MEMORY projector video - Sharp XG-E3500U | XG-E3500U Operation Manual - Page 22
+ MODE [OFF] RESET MEMORY SELECT :SEL. ENTER : N E X T MENU : E N D Computer Mode Memory Adjustments • The projector has been preset with SETTING." Then press the ENTER button to go to the RGB INPUT adjustment menu screen. (If you do not want as a user mode. See page 21 for details on - Sharp XG-E3500U | XG-E3500U Operation Manual - Page 23
/Maintenance Indicators" for details. ON/OFF When the power is on, the LAMP Notes: REPLACEMENT indicator flashes • When the POWER indicator is not lit, the remote control cannot be used to operate the projector. to show the operating condition of • If the power is turned on immediately after - Sharp XG-E3500U | XG-E3500U Operation Manual - Page 24
ADJUSTMENT / buttons to highlight SYSTEM yellow. Then press the ENTER button to display the SYSTEM. 4) Press the ADJUSTMENT / buttons to highlight yellow the video system desired yellow. Then press the ENTER button to set the system. Notes: • In AUTO mode, "PAL," "SECAM", "NTSC 4.43" or "NTSC 3.58 - Sharp XG-E3500U | XG-E3500U Operation Manual - Page 25
for 90 seconds, then the power will turn off, and the projector will return to STANDBY mode. The power can be turned on again either from the projector or remote control. When the power is turned on, the POWER indicator and LAMP REPLACEMENT indicator light green. Note: • When the MAIN POWER is off - Sharp XG-E3500U | XG-E3500U Operation Manual - Page 26
on the projector and the remote control. • The adjustments can be memorized in RGB 1, RGB 2 or VIDEO separately. • SHARPNESS For less sharpness For more sharpness RESET All RGB Video Adjustment items are returned to the factory preset settings. Note: To reset all adjustment items, select RESET - Sharp XG-E3500U | XG-E3500U Operation Manual - Page 27
it to suit your own preference with the ADJUSTMENT buttons on the projector or the remote control. • You can adjust the BALANCE, TREBLE and BASS. • To return to the factory preset mode, press the ADJUSTMENT / buttons to select "RESET", then press the ENTER button. • Press the MENU button to select - Sharp XG-E3500U | XG-E3500U Operation Manual - Page 28
Functions on the Projector On-Screen Display SYSTEM SETUP RESOLUTION HOR FREQ VERT FREQ LAMP USAGE REMOTE MOUSE DC 5V OUTPUT 800@600 3 7 . 9 KHz 6 0 Hz 1234H [AT] M. PWR :SEL. :ADJ. MENU : E N D SYSTEM SETUP RESOLUTION HOR FREQ VERT FREQ LAMP USAGE REMOTE MOUSE DC 5V OUTPUT 800@600 3 7 . 9 - Sharp XG-E3500U | XG-E3500U Operation Manual - Page 29
LCD Projector BLACK SCREEN On-Screen Display IMAGE ADJ. BLK SCRN DISP [ON] I N PBULT ADCI SKP LSA CY REE[ ONF F ] REVERSE [OFF] INVERT [OFF] :SEL. :ADJ. MENU : E N D Using the Black Screen Function s This projector SCREEN button on the projector or the remote control to display the - Sharp XG-E3500U | XG-E3500U Operation Manual - Page 30
projector is equipped with a Blue Screen function that will turn the screen blue when the video input terminal is not connected to anything, or the video Displays that appear during input select ("RGB 1,024 @ 768, 75 Hz," if the INPUT CHECK button on the remote control is pressed. • Press the MENU - Sharp XG-E3500U | XG-E3500U Operation Manual - Page 31
the filter more often when the projector is used in a dusty or smoky location. s Have your nearest Authorized Sharp Industrial LCD Products Dealer or Service Center exchange the filter (PFILD0082CEZZ) when it is no longer possible to clean it. Cleaning and Replacing the Filter 1 Turn OFF the MAIN - Sharp XG-E3500U | XG-E3500U Operation Manual - Page 32
in yellow on the screen to alert you that it is time to replace the lamp. At this point, take your projector to the nearest Authorized Sharp Industrial LCD Products Dealer or Service Center to have the lamp replaced. Note: The lamp usage time can be checked with the On-Screen display. (See page 28 - Sharp XG-E3500U | XG-E3500U Operation Manual - Page 33
. Vertical sync signal 7. Earth (green/sync on green) 15. Reserve input 3 Analog RGB 2 Signal Input : 5 BNC Computer Input Analog R Video input (red) G/G sync Video input (green/sync on green) B Video input (blue) H/C sync Horizontal sync signal, Mac C-sync signal V Vertical sync signal - Sharp XG-E3500U | XG-E3500U Operation Manual - Page 34
0DH) Problem response liquid crystal projector VIDEO 2 RGB 1 RGB 2 INPUT CHECK ENGLISH DEUTSCH ESPANOL NEDERLANDS FRANCAIS ITALIANO SVENSKA JAPANESE AUTO PAL SECAM NTSC 4.43 NTSC 3.58 PICTURE (-30 ~ +30) BRIGHT (-30 ~ +30) COLOR (-30 ~ +30) TINT (-30 ~ +30) SHARPNESS (-30 ~ +30) VIDEO 1 DISPLAY RESET - Sharp XG-E3500U | XG-E3500U Operation Manual - Page 35
REVERSE ON INVERT OFF INVERT ON DISPLAY BLACK SCREEN DISPLAY OFF BLACK SCREEN DISPLAY ON REMOTE MOUSE AT REMOTE MOUSE 98 WHEN LAMP IS ON WHEN MAIN POWER IS ON MEMORY RELEASE MEMORY SELECTION (1 ~ 7) Notes: • RGB INPUT ADJUSTMENT can only be set in the displayed computer mode. • The "מ30 ϳ ם30 - Sharp XG-E3500U | XG-E3500U Operation Manual - Page 36
00 10 1 101 0 Note: • To operate the MOUSE, L-CLICK and R-CLICK functions through the wired remote control input, connect the cable from the wired remote control (supplied) terminal on the projector to the remote control. The codes for these functions are complex and are, therefore, not listed here - Sharp XG-E3500U | XG-E3500U Operation Manual - Page 37
Pointer of Remote Control Dimensions (W × D × H) Weight Supplied accessories Replacement parts LCD Projector XG-E3500U PAL/SECAM/NTSC 3.58/NTSC 4.43 LCD panel × 3, RGB optical shutter method Panel size: 1.8 Љ (27.6 [H] × 36.9 [W] mm) Display method: Translucent TN liquid crystal panel Drive - Sharp XG-E3500U | XG-E3500U Operation Manual - Page 38
Dimensions Rear View Top View 23.0Љ(585) 14.8Љ(377) 13.2Љ(335) 0.2Љ(4) Side View 3.5Љ(89) ø1.8Љ(ø45) 1.8Љ(46) 3.7Љ(95) 14.0Љ(355) 0.2Љ(6) ø4.7Љ(ø120) 6.5Љ(165.5) (Lens housed) 7.0Љ(176.8) (Lens extended) 8.2Љ(208) 11.7Љ(296) 4.8Љ(121.1) (Lens at upper shift) 3.8Љ(96.9) (Lens at lower
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
 |
 |
E-1
Dear SHARP Customer
Welcome to the SHARP Family. We are pleased that you are now the owner of a SHARP Color
LCD Projector built for outstanding quality, reliability and performance.
Every SHARP Color LCD Projector is adjusted for a proper picture and has passed through the
most stringent quality control tests at the factory. We have prepared this OPERATION MANUAL
so that you have the ability to adjust the picture and color to your personal viewing preference.
We sincerely hope that you will be satisfied with the quality and performance of your Color LCD
Projector for many years to come.
Please read the instructions carefully, and keep them handy for future reference.
IMPORTANT
For your assistance in reporting the loss or
theft of your Color LCD Projector, please
record the Serial Number located on the rear
of the projector and retain this information.
Important Information
There are two important reasons for prompt warranty registration of your new SHARP LCD
Projector, using the REGISTRATION CARD packed with the projector.
1) WARRANTY
This is to assure that you immediately receive the full benefit of the parts, service and labor
warranty applicable to your purchase.
2) CONSUMER PRODUCT SAFETY ACT
To ensure that you will promptly receive any safety notification of inspection, modification, or
recall that SHARP may be required to give under the 1972 Consumer Product Safety Act,
PLEASE READ CAREFULLY THE IMPORTANT “LIMITED WARRANTY” CLAUSE.
U.S.A. ONLY
WARNING:
High brightness light source, do not stare into the beam of light, or view directly.
Be especially careful that children do not stare directly into the beam of light.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS PRODUCT TO RAIN OR MOISTURE.
Model No.: XG-E3500U
Serial No.:
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk or electric
shock to persons.
The exclamation point within a triangle is
intended to alert the user to the presence of
important operating and maintenance
(servicing) instructions in the literature
accompanying the product.
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.