Sharp XG-P10XU XGP10XU Operation Manual - Page 27

Picture Adjustments Projector Remote control 1, 4 2, 3 (GUI) On-screen Display (COMPUTER/RGB input in INPUT 1 or 2 mode) 1 2 Adjusting the Picture You can adjust the projector's picture to your preferences with the following picture settings. Description of Adjustment Items Selected item Contrast Bright Color Tint Sharp Red Blue Reset ß button © button For less contrast For more contrast For less brightness For more brightness For less color intensity For more color intensity Skin tones become purplish Skin tones become greenish For less sharpness For more sharpness For weaker red For stronger red For weaker blue For stronger blue All image adjustment items are returned to the factory preset settings. • "Color", "Tint" and "Sharp" do not appear for COMPUTER/ RGB input in INPUT 1 or 2 mode. (Slide the MOUSE/ADJUSTMENT switch MOUSE ADJ. on the remote control to the ADJ. position.) 1 Press MENU. Menu bar and "Picture" menu screen appear. GUI operation guide is also displayed. 2 Press ∂/ƒ to select a specific adjustment item. 3 Press ß/© to move the mark of the selected adjustment item to the desired setting. 4 To exit from the GUI, press MENU. • To reset all adjustment items, select "Reset" on the "Picture" menu screen and press ENTER. • The adjustments can be stored separately in the "INPUT 1", "INPUT 2" and "INPUT 3 (VIDEO)" modes. • Depending on the type of signal received, "Sharp" may not be adjustable for COMPONENT input in INPUT 1 or 2 mode. Operation E-26