Sharp XG-P10XU XGP10XU Operation Manual - Page 53
RS-232C Port Specifications - projector problems
View all Sharp XG-P10XU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
RS-232C Port Specifications PC control A computer can be used to control the projector by connecting an RS-232C cable (null modem, cross type, sold separately) to the projector. (See page 14 for connection.) Communication conditions Set the serial port settings of the computer to match that of the table. Signal format: Conforms to RS-232C standard. Baud rate: 9,600 bps Data length: 8 bits Parity bit: NON Stop bit: 1 bit Flow control: None Basic format Commands from the computer are sent in the following order: command, parameter, and return code. After the projector processes the command from the computer, it sends a response code to the computer. Command format C1 C2 C3 C4 P1 P2 P3 P4 Return code (0DH) Command 4-digits Response code format Normal response Parameter 4-digits O K Return code (0DH) Problem response (communication error or incorrect command) E R R Return code (0DH) When more than one code is being sent, send each command only after the OK response code for the previous command from the projector is verified. • When using the computer control function of the projector, the projector operating status cannot be read to the computer. Therefore, confirm the status by transmitting the display commands for each adjustment menu and checking the status with the On-screen Display. If the projector receives a command other than a menu display command, it will execute the command without displaying the On-screen Display. Commands EXAMPLE • When "BRIGHT" of INPUT 1 IMAGE ADJUSTMENT is set to מ10. Computer RABR _מ1 0 → ← Projector OK CONTROL ITEM POWER SETTING INPUT SWITCHING INPUT CHECK VOLUME ADJUSTMENT LENS ADJUSTMENT COMMAND PARAMETER C1 C2 C3 C4 P1 P2 P3 P4 CONTROL CONTENTS P O W R _ _ _ 0 POWER OFF (STANDBY) P O W R _ _ _ 1 POWER ON I R G B _ _ _ 1 INPUT1 I R G B _ _ _ 2 INPUT2 I V E D _ _ _ 1 INPUT3 (VIDEO) I C H K _ _ _ 0 INPUT CHECK V O L A _ _ * * VOLUME (00 - 60) M U T E _ _ _ 0 MUTE OFF M U T E _ _ _ 1 MUTE ON L N F O _ * * * LENS FOCUS (מ30 - ם30) L N Z O _ * * * LENS ZOOM (מ30 - ם30) K EY S * * * * KEYSTONE (מ127 - ם127) L N D S _ * * * DIGITAL SHIFT (מ96 - ם96) CONTROL ITEM COMMAND PARAMETER C1 C2 C3 C4 P1 P2 P3 P4 CONTROL CONTENTS INPUT 1 SIGNAL TYPE I A S I _ _ _ 1 RGB SELECTION I A S I _ _ _ 2 COMPONENT INPUT 1 I/P CONVERSION R A I P _ _ _ 0 INTERLACED R A I P _ _ _ 1 PROGRESSIVE R A C T _ _ * * COLOR TEMPERATURE (מ3 - ם3) R A P I _ * * * CONTRAST (מ30 - ם30) R A B R _ * * * BRIGHT (מ30 - ם30) INPUT 1 IMAGE ADJUSTMENT R A R D _ * * * RED (מ30 - ם30) R A B E _ * * * BLUE (מ30 - ם30) R A C O _ * * * COLOR (מ30 - ם30) R A T I _ * * * TINT (מ30 - ם30) R A S H _ * * * SHARPNESS (מ30 - ם30) R A R E _ _ _ 0 INPUT 1 DISPLAY R A R E _ _ _ 1 RESET E-52 Appendix