Sharp XG-P25X XG-P25X Operation Manual - Page 23
Watching Video Images
View all Sharp XG-P25X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Setup & Connections Watching Video Images Connecting to a VCR, laser disc player and other audiovisual equipment using the standard video Input S-video cable (sold separately) To S-video output terminal Example Video cable (sold separately) 1 To video output terminal VCR or Laser disc player 2 Audio cable (sold separately) To audio output terminals 1 Connect the yellow RCA connectors to the corresponding yellow VIDEO INPUT 4 terminal on the projector and the Video output terminal on the video source. 2 To use the built-in audio system, connect the red and white RCA connectors to the corresponding red and white AUDIO INPUT 4/5 terminals on the projector and the Audio output terminals on the video source. The S-VIDEO INPUT 5 terminal uses a video signal system in which the picture is separated into a color and a luminance signal to realize a higher-quality image. • For higher quality video, you may use the S-VIDEO INPUT 5 terminal on the projector. S-video cable is sold separately. • If your video equipment does not have an S-video output terminal, use a composite video cable. CAUTION • Always turn off the projector before connecting to video equipment, in order to protect both the projector and the equipment being connected. XG-P25X/CD (E)-b 20 02.3.19, 7:04 PM E-20