Sharp XG-P25X XG-P25X Operation Manual - Page 25
Power ON/OFF - lamp light red
View all Sharp XG-P25X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Setup & Connections Power ON/OFF Projector Remote control POWER Press POWER ON. • The blinking green LAMP REPLACEMENT indicator shows that the lamp is warming up. Wait until the indicator stops blinking before operating the projector. • If the power is turned off and then immediately turned on again, it may take a short while before the lamp turns on. • After the projector is unpacked and turned on for the first time, a slight odor may be emitted from the exhaust vent. This odor will soon disappear with use. When the power is on, the LAMP REPLACEMENT indicator lights, indicating the status of the lamp. Green: Lamp is ready. Green blinking: Warming up. Red: Change the lamp. LAMP REPLACEMENT indicator On-screen Display Press POWER OFF. Press POWER OFF again while the message is displayed to turn off the power. • If you accidentally pressed POWER OFF and do not want to turn off the power, wait until the power off screen disappears. • When the power is turned off, the POWER indicator will light up red and the cooling fan will run for about 90 seconds. The projector will then enter standby mode. • Wait until the cooling fan stops before disconnecting the power cord. • The power can be turned on again by pressing POWER ON. When the power is turned on, the POWER indicator and the LAMP REPLACEMENT indicator light green. • The POWER indicator flashes if the bottom filter cover is not securely installed. WARNING: The cooling fan in this projector continues to run for about 90 seconds after the projector is turned off. During normal operation, when turning the power off always use the POWER OFF button on the projector or on the remote control. Ensure the cooling fan has stopped before disconnecting the power cord. DURING NORMAL OPERATION, NEVER TURN THE PROJECTOR OFF BY DISCONNECTING THE POWER CORD. FAILURE TO OBSERVE THIS WILL RESULT IN PREMATURE LAMP FAILURE. XG-P25X/CD (E)-b 22 02.3.19, 7:04 PM E-22