Sharp XG-P25X XG-P25X Operation Manual - Page 77

Specifications - bqc / 1

Page 77 highlights

Specifications Product type LCD Projector Model XG-P25X Video system PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC 4.43 DTV 480I/480P/580I/580P/720P/1035I/1080I Display method LCD panel ‫ ן‬3, RGB optical shutter method LCD panel Panel size: 1.3Љ (33mm) (20.0 [H] ‫ ן‬26.6 [W] mm) Display method: Translucent TN liquid crystal panel Drive method: TFT (Thin Film Transistor) Active Matrix panel No. of dots: 786,432 dots (1,024 [H] ‫ ן‬768 [V]) Standard Lens 1-1.3 ‫ ן‬zoom lens, F1.7-2.4, f = 49.2-63.8 mm Projection lamp AC 270 W lamp Video input signal RCA Connector (INPUT 4): VIDEO, composite video, 1.0 Vp-p, sync negative, 75 Ω terminated RCA Connector: AUDIO, 0.5 Vrms more than 22 kΩ (stereo) S-video input signal 4-pin Mini DIN connector (INPUT 5) Y (luminance signal): 1.0 Vp-p, sync negative, 75 Ω terminated C (chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated Component input signal BNC Connector (INPUT 2) Y: 1.0 Vp-p, sync negative, 75 Ω terminated PB: 0.7 Vp-p, 75 Ω terminated PR: 0.7 Vp-p, 75 Ω terminated Horizontal resolution 520 TV lines (S-video input), 750 TV lines (DTV 720P input, STRETCH mode) RGB input signal 15-PIN MINI D-SUB CONNECTOR (INPUT 1), 5 BNC CONNECTOR (INPUT 2): RGB separate/composite sync/sync on green type analog input: 0-0.7 Vp-p, positive, 75 Ω terminated DVI CONNECTOR (29-PIN) (INPUT 3), RGB (DIGITAL), 250-1,000 mV, 50 Ω HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative) or composite sync (Apple only) VERTICAL SYNC. SIGNAL: Same as above STEREO MINIJACK: AUDIO, 0.5 Vrms, more than 22 kΩ (stereo) Pixel clock 12-230 MHz Vertical frequency 43-200 Hz Horizontal frequency 15-126 kHz Computer control signal 9-pin D-sub connector (RS-232C Input Port/Output Port) Speaker system 1 49⁄64Љ (4.5 cm) round ‫ ן‬2 2 W ‫ ם‬2 W (stereo) Rated voltage AC 100-240 V Input current 3.9 A Rated frequency 50/60 Hz Power consumption 380 W Heat dissipation 1,430 BTU/hour Operating temperature 41°F to 104°F (‫ם‬5°C to ‫ם‬40°C) Storage temperature ‫מ‬4°F to 140°F (‫מ‬20°C to ‫ם‬60°C) Cabinet Plastic Dimensions (approx.) 12 9⁄16Љ (W) ‫ ן‬6 3⁄32Љ (H) ‫ ן‬16 21⁄32Љ (D) (319.0 ‫ ן‬155.0 ‫ ן‬423.0 mm) (main body only) 12 11⁄32Љ (W) ‫ ן‬7 27⁄64Љ (H) ‫ ן‬17 17⁄32Љ (D) (322.5 ‫ ן‬188.5 ‫ ן‬445.0 mm) (including standard lens, adjustment feet and projecting parts) Weight (approx.) 21.4 lbs. (9.7 kg) Supplied accessories Remote control, Two R-6 batteries, Power cord, RGB cable (9Ј 10Љ, 3 m), Computer audio cable (9Ј 10Љ, 3 m), Three BNC-RCA adaptors, Extra air filter, Lens cap, CD-ROM, LCD projector operation manual, Quick reference guides, ID number seal Replacement parts Lamp unit (Lamp/cage module) (BQC-XGP25X//1), Remote control (RRMCGA048WJSA), Two R-6 batteries ("AA" size, UM/SUM-3, HP-7 or similar), Power cord for U.S., Canada etc. (QACCDA010WJPZ), Power cord for Europe, except U.K. (QACCV4002CEZZ), Power cord for U.K., Hong Kong and Singapore (QACCB5024CENA), Power cord for Australia, New Zealand and Oceania (QACCL3022CEZZ), RGB cable (QCNWGA012WJPZ), Computer audio cable (QCNWGA013WJPZ), BNC-RCA adaptors (QPLGJ0107GEZZ), Air filter (PFILD0080CEZZ), Lens cap (PCAPH1056CESA), CD-ROM (UDSKAA004WJZZ, UDSKAA005WJZZ), LCD projector operation manual (TINS-A133WJZZ), Quick reference guides, Sharp Advanced Presentation Software installation guide (TINS-A139WJZZ), ID number seal (TLABZ0781CEZZ) This SHARP projector uses LCD (Liquid Crystal Display) panels. These very sophisticated panels contain 786,432 pixels (‫ ן‬RGB) TFTs (Thin Film Transistors). As with any high technology electronic equipment such as large screen TVs, video systems and video cameras, there are certain acceptable tolerances that the equipment must conform to. This unit has some inactive TFTs within acceptable tolerances which may result in illuminated or inactive dots on the picture screen. This will not affect the picture quality or the life expectancy of the unit. Specifications are subject to change without notice. Appendix XG-P25X/CD (E)-h 74 02.3.19, 7:14 PM E-74

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80

E-74
Appendix
Specifications
Product type
Model
Video system
Display method
LCD panel
Standard Lens
Projection lamp
Video input signal
S-video input signal
Component input signal
Horizontal resolution
RGB input signal
Pixel clock
Vertical frequency
Horizontal frequency
Computer control signal
Speaker system
Rated voltage
Input current
Rated frequency
Power consumption
Heat dissipation
Operating temperature
Storage temperature
Cabinet
Dimensions (approx.)
Weight (approx.)
Supplied accessories
Replacement parts
LCD Projector
XG-P25X
PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC 4.43
DTV 480
I
/480P/580
I
/580P/720P/1035
I
/1080
I
LCD panel
±
3, RGB optical shutter method
Panel size: 1.3
·
(33mm) (20.0 [H]
±
26.6 [W] mm)
Display method: Translucent TN liquid crystal panel
Drive method: TFT (Thin Film Transistor) Active Matrix panel
No. of dots: 786,432 dots (1,024 [H]
±
768 [V])
1–1.3
±
zoom lens, F1.7–2.4, f = 49.2–63.8 mm
AC 270 W lamp
RCA Connector (INPUT 4): VIDEO, composite video, 1.0 Vp-p, sync negative, 75
terminated
RCA Connector: AUDIO, 0.5 Vrms more than 22 k
(stereo)
4-pin Mini DIN connector (INPUT 5)
Y (luminance signal): 1.0 Vp-p, sync negative, 75
terminated
C (chrominance signal): Burst 0.286 Vp-p, 75
terminated
BNC Connector (INPUT 2)
Y: 1.0 Vp-p, sync negative, 75
terminated
P
B
: 0.7 Vp-p, 75
terminated
P
R
: 0.7 Vp-p, 75
terminated
520 TV lines (S-video input), 750 TV lines (DTV 720P input, STRETCH mode)
15-
PIN MINI
D-
SUB CONNECTOR
(INPUT 1), 5 BNC
CONNECTOR
(INPUT 2):
RGB separate/composite sync/sync on green type analog input: 0–0.7 Vp-p, positive,
75
terminated
DVI
CONNECTOR
(29-
PIN
) (INPUT 3), RGB (DIGITAL), 250–1,000 mV, 50
H
ORIZONTAL SYNC
.
SIGNAL
: TTL level (positive/negative) or composite sync (Apple only)
V
ERTICAL SYNC
.
SIGNAL
: Same as above
S
TEREO
M
INIJACK
: AUDIO, 0.5 Vrms, more than 22 k
(stereo)
12–230 MHz
43–200 Hz
15–126 kHz
9-pin D-sub connector (RS-232C Input Port/Output Port)
1
49
64
·
(4.5 cm) round
±
2
2 W
³
2 W (stereo)
AC 100–240 V
3.9 A
50/60 Hz
380 W
1,430 BTU/hour
41°F to 104°F (
³
5°C to
³
40°C)
²
4°F to 140°F (
²
20°C to
³
60°C)
Plastic
12
9
16
·
(W)
±
6
3
32
·
(H)
±
16
21
32
·
(D) (319.0
±
155.0
±
423.0 mm) (main body only)
12
11
32
·
(W)
±
7
27
64
·
(H)
±
17
17
32
·
(D) (322.5
±
188.5
±
445.0 mm) (including standard
lens, adjustment feet and projecting parts)
21.4 lbs. (9.7 kg)
Remote control, Two R-6 batteries, Power cord, RGB cable (9
10
·
, 3 m), Computer audio
cable (9
10
·
, 3 m), Three BNC-RCA adaptors, Extra air filter, Lens cap, CD-ROM, LCD
projector operation manual, Quick reference guides, ID number seal
Lamp unit (Lamp/cage module) (BQC-XGP25X//1), Remote control (RRMCGA048WJSA),
Two R-6 batteries (“AA” size, UM/SUM-3, HP-7 or similar), Power cord for U.S., Canada
etc. (QACCDA010WJPZ), Power cord for Europe, except U.K. (QACCV4002CEZZ), Power
cord for U.K., Hong Kong and Singapore (QACCB5024CENA), Power cord for Australia,
New Zealand and Oceania (QACCL3022CEZZ), RGB cable (QCNWGA012WJPZ),
Computer audio cable (QCNWGA013WJPZ), BNC-RCA adaptors (QPLGJ0107GEZZ), Air
filter (PFILD0080CEZZ), Lens cap (PCAPH1056CESA), CD-ROM (UDSKAA004WJZZ,
UDSKAA005WJZZ), LCD projector operation manual (TINS-A133WJZZ), Quick reference
guides, Sharp Advanced Presentation Software installation guide (TINS-A139WJZZ), ID
number seal (TLABZ0781CEZZ)
This SHARP projector uses LCD (Liquid Crystal Display) panels. These
very sophisticated panels contain 786,432 pixels (
±
RGB) TFTs (Thin
Film Transistors). As with any high technology electronic equipment
such as large screen TVs, video systems and video cameras, there
are certain acceptable tolerances that the equipment must conform
to.
This unit has some inactive TFTs within acceptable tolerances which
may result in illuminated or inactive dots on the picture screen. This
will not affect the picture quality or the life expectancy of the unit.
Specifications are subject to change without notice.
XG-P25X/CD (E)-h
02.3.19, 7:14 PM
74