Sharp XL-UH242 XL-UH242 Operation Manual - Page 33

Enhancing your system XL-UH242 SUBWOOFER PRE-OUT The connection cord is not included. Purchase a commercially available cord as shown below. VIDEO/AUX IN RIGHT LEFT SPEAKERS RATED SPEAKER IMPEDANCE: 6 OHMS MIN. AC INPUT RIGHT LEFT ANTENNA FM GND AM 75 OHMS VIDEO/AUX IN RIGHT LEFT SPEAKERS LIGHT-UP LEFT RIGHT Listening to the playback sounds from VCR, DVD, etc. 1 Use a connection cord to connect the VCR, DVD, etc. to the VIDEO/AUX IN jacks. When using video equipment, connect the audio output to this unit and the video output to a television. 2 Press the ON/STAND-BY button to turn the power on. 3 Press the VIDEO/AUX/USB button. 4 Play the connected equipment. Note: To prevent noise interference, place the unit away from the television. Advanced Features TUNER CD (BAND) Headphones Before plugging in or unplugging the headphones, reduce the volume. Be sure your headphones have a 1/8" (3.5 mm) diameter plug and impedance between 16 and 50 ohms. The recommended impedance is 32 ohms. Plugging in the headphones disconnects the speakers automatically. Adjust the volume using the VOLUME control. Auto power on function: When you press any of the following buttons, the unit turns on. VIDEO/AUX/USB button (main unit and remote control): The unit turns on and the "USB" or "AUX" function is activated. / button on the main unit: The unit turns on and playback of the last function starts (CD,TUNER,VIDEO/AUX/USB). 33