Sharp XR-1XDM XR-1S , XR-1X Operation Manual
Sharp XR-1XDM Manual
 |
View all Sharp XR-1XDM manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp XR-1XDM manual content summary:
- Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 1
Introduction Quick Start Setup Connections MULTIMEDIA PROJECTOR MODEL XR-1X XR-1S OPERATION MANUAL (The picture shown above is of the XR-1S.) Basic Operation Useful Features Appendix - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 2
Projector, please record the Model and Serial Number located on the bottom of the projector incorporating a 5A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or plug to the mains lead, follow the instructions below: WARNING: THIS APPARATUS MUST BE EARTHED - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 3
- Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 4
, Italian, Dutch, Portuguese, Chinese (Traditional Chinese and Simplified Chinese) and Korean. Carefully read through the operation instructions before operating the projector. Die mitgelieferte CD-ROM enthält Bedienungsanleitungen in Englisch, Deutsch, Französisch, Schwedisch, Spanisch, Italienisch - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 5
operation manual carefully. Introduction ENGLISH There are two important reasons for prompt warranty registration of your new SHARP Projector, using the REGISTRATION CARD packed with the projector. 1. WARRANTY This is to assure that you immediately receive the full benefit of the parts, service - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 6
lithium battery in the remote control. Caution Concerning Lamp Replacement See "Replacing the Lamp" on page 55. LAMP REPLACEMENT WARNING BEFORE REMOVING THE SCREW, DISCONNECT POWER CORD. HOT SURFACE INSIDE. ALLOW 1 HOUR TO COOL BEFORE REPLACING THE LAMP. REPLACE WITH SAME SHARP LAMP UNIT MODEL AN - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 7
the same manner. This operation manual uses the XR-1S for the purpose of explanation. • In this operation manual, the illustration and the projector. Note .........Indicates additional information for setting up and operating the projector. For Future Reference Maintenance P. 52 Troubleshooting - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 8
and Projection Distance (XR-1S 20 Connections Connections 21 Samples of Cables for Connection .... 22 Connecting to a Computer 23 Connecting to Video Equipment ......... 24 Connecting the Power Cord 25 Using Basic Operation Turning the Projector On/Off 26 Turning the Projector on 26 Turning - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 9
Indicators 53 Regarding the Lamp 55 Lamp 55 Caution Concerning the Lamp 55 Replacing the Lamp 55 Removing and Installing the Lamp Unit 56 Resetting the Lamp Timer 57 Connecting Pin Assignments 58 Computer Compatibility Chart 59 Troubleshooting 60 For SHARP Assistance 62 Specifications - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 10
the manufacturer's instructions, and should use a mounting accessory recommended by the manufacturer. 9. Transportation A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. 10. Ventilation - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 11
way. f. When the product exhibits a distinct change in performance, this indicates a need for service. 19. Replacement Parts When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 12
of glass par- ticles if lamp ruptures. In case of lamp rupture, contact your nearest Sharp Authorized Projector Dealer or Service Center for a replacement. See "Replacing the Lamp" on page 55. AN-XR1LP Caution concerning the setup of the projector ■ For minimal servicing and to maintain high image - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 13
audio- visual equipment to the projector, make the connections AFTER unplugging the power cord of the projector from the AC outlet and turning off the equipment to be connected. ■ Please read the operation manuals of the projector and the equipment to be connected for instructions on how to make the - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 14
projector, even if you do not have this manual. To utilize these manuals .adobe.com). Accessing the PDF Manuals For Windows: 1 Insert the the "XR1" pdf file to access the projector manuals. For Macintosh: 1 Insert the CD-ROM XR1" pdf file to access the projector manuals. Note • If the desired pdf - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 15
region. Please check with your nearest Sharp Authorized Projector Dealer or Service Center. Carrying the Projector Using the Soft Case Tying the Cables Tie the cable using the supplied cable ties. Power cord RGB/USB cable Info • Be sure the projector has cooled down sufficiently before placing - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 16
Part Names and Functions Numbers in Z refer to the main pages in this operation manual where the topic is explained. Projector Top View Lamp indicator 54 ON/STANDBY button 26 For turning the power 54 on and putting the projector into standby mode. ENTER button 36 For setting items selected - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 17
INPUT 24 terminal 25 AC socket 25 Connect the supplied Power cord. Intake vent 52 52 Exhaust vent Kensington Security Standard connector 28 Rear adjustment foot Remote control 15 sensor Using the Kensington Lock • This projector has a Kensington Security Standard connector for use with - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 18
Part Names and Functions (Continued) Numbers in Z refer to the main pages in this operation manual where the topic is explained. ON/STANDBY button 26 For turning the power on and putting the projector level. Note • All the buttons on the remote control, except the MOUSE/Adjustment button, are made - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 19
or high temperature. • The remote control may malfunction under a fluorescent lamp. In this case, move the projector away from the fluorescent lamp. Front view 30° Remote control sensor 30° Remote control signal transmitters 30° 13n (4 m) Remote control Rear view Remote control sensor 30° 13n - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 20
_P. 18 2. Connect the projector to the computer and plug the power cord into the AC socket of the projector When connecting equipment other than the computer, see pages 24 and 25. _PP. 21-25 3. Press the ON/STANDBY button to turn the projector on On the projector On the remote control _P. 26 16 - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 21
message is displayed, to put the projector into standby mode. On the On-screen Display On the remote projector control • While the cooling fan is running, the Adjustment buttons blinks. (When "Guide LEDs" is set to "On". n page 48) • Unplug the power cord from the AC outlet after the cooling - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 22
. Close the curtains and dim the lights when setting up the screen in a sunny or bright room. Standard Setup (Front Projection) ■ Place the projector at the required distance from the screen according to the desired picture size. (See page 19.) Example of standard setup Side View Screen H Lens - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 23
Setup Screen Size and Projection Distance (XR-1X) NORMAL Mode (4:3) Picture (Screen) size Diag. (17Ј 5Љ) 132 cm (52Љ) 4.2 m(13Ј10Љ) 125 cm (49Љ) 4.0 m (13Ј 1Љ) 115 cm (45Љ) 3.7 m (12Ј 0Љ) 105 cm (41Љ) 3.3 m (11Ј 0Љ) 90 cm (35Љ) 2.9 m (9Ј 5Љ) 75 cm (29Љ) 2.4 m (7Ј10Љ) 50 cm (20Љ) 1.6 m (5Ј 3Љ) 37 - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 24
the Projector (Continued) Screen Size and Projection Distance (XR-1S) (80Љ) 115 cm (45Љ) 84Љ (213 cm) 186 cm (73Љ) 105 cm (41Љ) 72Љ (183 cm) 159 cm (63Љ) 90 cm ע41.5 cm (ע16 11/32Љ) ע31.1 cm (ע12 1/4Љ) ע27.6 cm (ע10 7/8Љ) ע22.0 cm (ע8 21/32Љ) ע20.8 cm (ע8 11/64Љ) ע19.1 cm - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 25
Connections INPUT Terminals and Connectable Main Equipment INPUT 1 terminal ■ Connecting the com- puter. (See page 23.) ■ Connecting video equipment with component output terminal (DVD player, DTV decoder, DVD recorder with hard disc, etc.). (See page 24.) INPUT 2 terminal Connecting video - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 26
of connection and cables, refer to the opeation manual of the connecting equipment. • You may need other cables or connectors not listed above. Equipment Computer Input Signal RGB video Cable RGB/USB cable (supplied) Terminal on the projector INPUT1 Audio-visual equipment ø3.5 mm stereo audio - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 27
the power cord of the projector from the AC outlet and turn off the devices to be connected. After making all connections, turn on the projector and mm stereo or mono audio cable (commercially available or available as Sharp service part QCNWGA038WJPZ) RGB/USB Cable * When using the ø3.5 mm mono - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 28
video signal and the video signal. If your audio-visual equipment has a component output terminal, use the COMPUTER/ COMPONENT terminal (INPUT1) on the projector for video connection. When using a 3 RCA (Component) to 15-pin D-sub cable To audio output terminal To component output (Y, CB/PB, CR/PR - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 29
available) Composite video cable (commercially available) Note • ø3.5 mm minijack to RCA audio cable (commercially available) is required for audio input. Connecting the Power Cord Plug the supplied power cord into the AC socket on the side of the projector. AC socket Connections 25 - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 30
(See pages 23, 24 and 25.) Also connect the power cord to the projector. (See page 25.) Press SON/STANDBY on the projector or AON/STANDBY on the remote control. • When the lamp is warming up, the Adjustment buttons blink in a clockwise direction. (When "Guide LEDs" is set to "On". n page 48) • When - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 31
Image Projection About the Setup Guide After turning on the projector, the Setup Guide screen appears to assist you with projector setup. Guidance items 1 FOCUS 2 HEIGHT ADJUST 3 ZOOM Adjust the projector by following the illuminated buttons or Setup Guide indicators. Press TENTER to turn off the - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 32
trapezoidal distortion. When you want to adjust the automatically corrected image, use the manual keystone correction. (See page 44.) 3 Adjusting the Screen Size You can adjust the screen size using the zoom knob on the projector. Rear adjustment foot Info • Do not apply too much pressure on the - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 33
the Auto Search buttons. (See page 47.) INPUT buttons AV MUTE button Volume buttons Adjusting the Volume Press K/L on the remote control or V/X on the projector to adjust the volume. Note • Pressing K/V will lower the volume. • Pressing L/X will raise the volume. On-screen Display Displaying the - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 34
600) XGA (1024 K 768) SXGA (1280 K 960) SXGA L (1400 K 1050) SXGA (1280 K 1024) 1280 K 720 NORMAL XR-1X XR-1S 1024 K 768 800 K 600 1024 K 768 J 800 K 600 J BORDER XR-1X XR-1S STRETCH XR-1X XR-1S 768 K 576 600 K 450 1024 K 576 800 K 450 768 K 576 J 600 K 450 J 1024 K 576 1024 K 576 - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 35
VIDEO • "STRETCH" is fixed when 540P, 720P or 1080I signals are entered. Input Signal DVD / Video Image type NORMAL Output screen image BORDER STRETCH 4:3 aspect ratio 480I, 480P, NTSC, PAL, SECAM Letter box Squeezed 16:9 image Squeezed 4:3 image 540P, 720P, 1080I (16:9) 16:9 aspect - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 36
Adjusting/Operating with the Remote Control Auto Sync (Auto Sync Adjustment) Auto Sync function works when detecting input signal after the projector turns on. Press FAUTO SYNC to manually adjust with Auto Sync function. Note • When the optimum image cannot be achieved with Auto Sync adjustment, - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 37
remote control as the computer mouse. To RGB output terminal To USB terminal Supplied accessory RGB/USB Cable To USB terminal To INPUT1 terminal Useful Features RGB/USB Cable 1 Connect the projector JR CLICK have common function when your computer supports only a one-click mouse, such as - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 38
- ADJ Page 43 Resize Page 43 Image Shift [XR-1X] [XR-1S] -96 +96 -75 +75 Page 43 Normal Border Stretch Keystone [XR-1X] -127 +127 [XR-1S] -100 +100 Page 44 Auto Keystone [On/Off] Page 44 OSD Display [On/Off] Page 44 Background Page 45 Setup Guide [On/Off] Page 45 Logo Blue None PRJ - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 39
47 Eco/Quiet Mode [On/Off] Page 47 Auto Search [On/Off] Page 47 Auto Power Off [On/Off] Page 48 Guide LEDs [On/Off] Page 48 System Sound [On/Off] Page 50 System Lock Page 49 Lamp Timer(Life) Page 50 Sub menu Old Code New Code Reconfirm Useful Features "Help" menu - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 40
achieve two functions, adjustment and setting. (For setting the menu items, see pages 38 and 39.) Operating with the projector When "PRJ - ADJ" - "Guide LEDs" is set to "On", the buttons used for menu adjustment on the projector light up. Example: When W, Y and the MENU/HELP button light up on the - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 41
3 Press P or R to select the item you want to adjust. • The selected item is highlighted. To adjust the projected image while watching it Press IENTER. • The selected single adjustment item (e.g. "Bright") appears instead of the menu. • When pressing P or R, the following item ("Red" after "Bright") - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 42
button RETURN button Menu Selections (Settings) Example: Setting "Background". •This operation can also be performed by using the buttons on the projector. 1 Press BMENU. • The "Picture" menu screen for the selected input mode is displayed. Example: "Picture" screen menu for INPUT 1 (RGB) mode - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 43
of the item displayed in the sub menu. 5 Press IENTER. Picture SCR - ADJ PRJ - ADJ Resize Image Shift Keystone Auto Keystone OSD Display Background Setup Guide PRJ Mode Language Normal 0 0 Off On On Front English SEL./ADJ. ENTER Help END Logo Blue None Picture SCR - ADJ PRJ - ADJ Resize - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 44
You can adjust the projector's picture to your preferences etc. Note • You can also press GPICTURE MODE on the remote control to select the picture mode. (See page 32.) Menu color intensity. For making skin tones purplish. For less sharpness. For more contrast. For more brightness. For stronger - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 45
Adjusting the ColorTemperature Emphasizing the Contrast Menu operation n Page 36 Q Example: "Picture" screen menu for INPUT 1 (RGB) mode Picture SCR - ADJ PRJ - ADJ Picture Mode Contrast Bright Red Blue CLR Temp Bright Boost sRGB Reset 0 0 0 0 7500K Standard Off Off Help SEL./ADJ. ENTER - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 46
SCR - ADJ PRJ - ADJ Help Picture Mode Contrast Bright Color Tint Sharp CLR Temp Bright Boost Progressive Reset SEL./ADJ. 0 0 0 0 0 video recording with the original encoded as is at 24 frames/second. The projector can convert this film source to progressive video at 60 frames/second with NTSC - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 47
- ADJ Resize Image Shift Keystone Auto Keystone OSD Display Background Setup Guide PRJ Mode Language Normal 0 0 Off On Logo On Front English the Resize mode, see pages 30 and 31. • You can also press HRESIZE on the remote control to set the resize mode. (See page 30.) O button Q button Note • - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 48
PRJ - ADJ Resize Image Shift Keystone Auto Keystone OSD Display Background Setup Guide PRJ Mode Language Normal 0 0 Off On Logo On Front English Help "Auto Keystone" and up to an angle of approximately ±15 degrees with the manual "Keystone". (when "Resize" is set to "Normal") • When the screen - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 49
Front English Help SEL./ADJ. ENTER END Description of Items Selectable items Logo Blue None Description Sharp logo screen Blue screen - You can set the Setup Guide screen during the projector startup. Menu operation n Page 38 Picture SCR - ADJ PRJ - ADJ Resize Image Shift Keystone Auto - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 50
- ADJ Resize Image Shift Keystone Auto Keystone OSD Display Background Setup Guide PRJ Mode Language Normal 0 0 Off On Logo On Front English rear of the screen or with a mirror Projecting with a mirror The projector can switch the on-screen display language among 11 languages. Menu operation n - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 51
"PRJ - ADJ" menu to enhance the usage for the projector. Eco/Quiet Mode Auto Search Function Menu operation n Page 38 Picture SCR - ADJ Eco/Quiet Mode Auto Search Auto Power Off Guide LEDs System Sound System Lock PRJ - ADJ On On On On On Help Lamp Timer(Life) SEL./ADJ. 0h ENTER 100% END - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 52
ADJ Eco/Quiet Mode Auto Search Auto Power Off Guide LEDs System Sound System Lock PRJ - ADJ On On On On On Help Lamp Timer(Life) 0h 100% SEL./ADJ. than 15 minutes, the projector will automatically enter standby mode. The Auto Power Off function will be disabled. Lamp Timer(Life) 0h 100% - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 53
you lose or forget your keycode, contact your nearest Sharp Authorized Projector Dealer or Service Center (see page 62). Even if the product warranty Auto Power Off Guide LEDs System Sound System Lock PRJ - ADJ On On On On On Help 2 Press the 4 buttons on the remote control or on the projector to - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 54
000 hours 5% Approx. 200 hours Approx. 150 hours Note • It is recommended that the lamp be changed when the remaining lamp life becomes 5%. For lamp replacement, contact your nearest Sharp Authorized Projector Dealer or Service Center. • The lamp life may vary depending on the usage condition. 50 - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 55
Note • You can adjust the items with check marks (✔). • Some items in the Help menu may not appear, depending on the projected image. • If the problem is not solved, refer to "Troubleshooting". (see pages 60 and 61) Useful Features 51 - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 56
Be sure to unplug the power cord before cleaning the projector. ■ The cabinet as well as the operation panel is made of plastic. Avoid using benzene or thinner, as these can damage the finish on the cabinet. ■ Do not use volatile agents such as insecticides on the projector. Do not attach rubber or - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 57
will change to (red), the lamp will automatically turn off and then the projector will automatically enter standby mode. At this time, the lamp indicator will illuminate in red. ■ If you try to turn on the projector a fourth time without replacing the lamp, the projector will not turn on. Appendix - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 58
Center (see page 62) for repair. • Disconnect the power cord from the AC outlet, and then connect it again. • Carefully replace the lamp. (See page 56.) • Take the projector to your nearest Sharp Authorized Projector Dealer or Service Center (see page 62) for repair. • Please exercise care when - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 59
the instructions described in this section. * If you wish, you may have the lamp replaced at your nearest Sharp Authorized Projector Dealer or Service Center. * If the new lamp does not light after replacement, take your projector to the nearest Sharp Authorized Projector Dealer or Service Center - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 60
STANDBY button 2 Disconnect the power cord. • Unplug the power cord from the AC socket. • Leave the lamp until it has fully cooled down (about 1 hour). AC socket 3 Remove the lamp unit cover. • Turn the projector over. Loosen the user service screw (1) that secures the lamp unit cover. Remove the - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 61
not turn on, even if the power cord is connected to the projector. Resetting the Lamp Timer Reset the lamp timer after replacing the lamp. User service screw (for lamp unit cover) Info • Make sure to reset the lamp timer only when replacing the lamp. If you reset the lamp timer and continue to use - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 62
Earth (Y) 8. Earth (blue) 8. Earth (PB) 9. Not connected 9. Not connected 1 5 10. GND 10. Not connected 6 10 11. Not connected 11. Not connected 12. Bi-directional data 12. Not connected 13. Horizontal name 1. SG GND 2. USB+ USB data+ 3. VCC USB power 34 4. USB- USB data- 58 - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 63
XR-1X: SXGA, SXGA+ XR-1S: XGA, SXGA, SXGA+ • Intelligent Compression and Expansion System resizing technology The following is a list of modes that conform to VESA. However, this projector supports in your notebook computer's operation manual. • When this projector receives 640K350 VESA format VGA - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 64
Troubleshooting Problem Check • Projector power cord is not plugged into the wall outlet. • Power to the external connected devices is off. • The selected input mode is wrong. • Cables incorrectly connected to the projector. • Remote control battery has run out. No picture and no sound • - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 65
turns off during projection The image sometimes • Cables incorrectly connected to the projector or the connected flickers. equipment works improperly. • If this happens frequently, replace the lamp. The lamp needs much • The lamp will eventually need to be changed. time to turn on. While the - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 66
If you encounter any problems during setup or operation of this projector, first refer to the "Troubleshooting" section on pages 60 and 61. If this operation manual does not answer your question, please contact the SHARP Service departments listed below. U.S.A. Sharp Electronics Corporation 1-888 - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 67
× 2, Soft case, Projector manual CD-ROM, Operation manual Replacement parts Lamp unit (Lamp/cage module) (AN-XR1LP), Remote control (RRMCGA256WJSA), Lithium battery, Power cord for U.S., Canada etc. (QACCDA029WJPZ), Power cord for Europe, except U.K. (QACCVA006WJPZ), Power cord for U.K., Hong Kong - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 68
Dimensions Units: inches (mm) 9 /47 64 (247) 4 13 16/ (122) 1 19 32/ (40.3) 1 9/64 (28.7) 1 27 64/ (36) 1 5/16 (33) 2 17 32/ (64) XR-1X XR-1S 6 /11 32 (161) 7 5/64 (179.5) 2 7/32 (56) 1 /15 16 (49) 2 /43 64 (67.5) 6 /11 32 (161) 7 5/64 (179.5) 2 7/32 (56) 1 /15 16 (49) 2 /43 64 ( - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 69
28 Red 40 Remote control 14 Remote control sensor 15 Replacing the lamp 55 Resize 43 RESIZE button 30 RETURN button 37 RGB/USB cable 23 SCR - ADJ 43 Screen Size and Projection Distance (XR-1S) ... 20 Screen Size and Projection Distance (XR-1X) ... 19 Setup Guide 27 Sharp 40 Soft case - Sharp XR-1XDM | XR-1S , XR-1X Operation Manual - Page 70
SHARP CORPORATION
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
 |
 |
Introduction
Quick Start
Setup
Connections
Basic
Operation
Useful
Features
Appendix
MULTIMEDIA PROJECTOR
MODEL
XR-1X
XR-1S
OPERATION MANUAL
(The picture shown above is of the XR-1S.)