Sharp XR-20X XR10S|XR10X|XR20S|XR20X Operation Manual
Sharp XR-20X - Notevision XGA DLP Projector Manual
 |
UPC - 074000364547
View all Sharp XR-20X manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp XR-20X manual content summary:
- Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 1
MULTIMEDIA PROJECTOR MODEL XR-20X/XR-20S XR-10X/XR-10S OPERATION MANUAL Introduction Quick Start Setup Connections Basic Operation Useful Features Appendix - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 2
projector and retain this information. • Before recycling the packaging, please ensure that you have checked the contents of the carton thoroughly against the list of "Supplied accessories" on page 10 plug to the mains lead, follow the instructions below: WARNING: THIS APPARATUS MUST BE EARTHED - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 3
iii - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 4
, Italian, Dutch, Portuguese, Chinese (Traditional Chinese and Simplified Chinese) and Korean. Carefully read through the operation instructions before operating the projector. Die mitgelieferte CD-ROM enthält Bedienungsanleitungen in Englisch, Deutsch, Französisch, Schwedisch, Spanisch, Italienisch - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 5
operation manual carefully. Introduction ENGLISH There are two important reasons for prompt warranty registration of your new SHARP Projector, using the REGISTRATION CARD packed with the projector. 1. WARRANTY This is to assure that you immediately receive the full benefit of the parts, service - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 6
not installed and used in accordance with the operation manual, may cause harmful interference to radio communications. Lamp Replacement See "Replacing the Lamp" on page 50. This SHARP projector uses a DMD panel. This very sophisticated panel contains 786,432 (XR20X/XR-10X) / 480,000 (XR-20S/XR-10S - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 7
. • In this operation manual, the illustration and the Contrast Bright Red Blue CLR Temp Bright Boost Lamp Setting Reset 0 0 0 0 7500K 1 projector. Note .........Indicates additional information for setting up and operating the projector. For Future Reference Maintenance P. 47 Troubleshooting - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 8
the Setup Guide 28 Adjusting the Projected Image 28 Switching the Input Mode 30 Adjusting the Volume 30 Displaying the Black Screen and Turning off the Sound Temporarily 30 Correcting Trapezoidal Distortion ........ 31 Resize Mode 32 Useful Features Operating with the Remote Control .... 34 - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 9
Lamp 50 Lamp 50 Caution Concerning the Lamp 50 Replacing the Lamp 50 Removing and Installing the Lamp Unit 51 Resetting the Lamp Timer 52 Connecting Pin Assignments 53 RS-232C Specifications and Command Settings 54 Computer Compatibility Chart 58 Troubleshooting 59 For SHARP Assistance - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 10
servicing. 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions The safety and operating instructions may cause the product and cart combination to overturn. 10. Ventilation Slots and openings in the cabinet are - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 11
instructions. Adjust only those controls that are covered by the operating instructions, as an improper adjustment of other controls 20. Safety Check Upon completion of any service or repairs to this product, ask the service amplifiers) that produce heat. • DLP\ (Digital Light Processing) and DMD - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 12
of glass par- ticles if lamp ruptures. In case of lamp rupture, contact your nearest Sharp Authorized Projector Dealer or Service Center for replacement. See "Replacing the Lamp" on page 50. Caution concerning the setup of the projector I For minimal servicing and to maintain high image quality - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 13
the AC outlet and turning off the equipment to be connected. I Please read the operation manuals of the projector and the equipment to be connected for instructions on how to make the connections. Using the projector in other countries I The power supply voltage and the shape of the plug may vary - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 14
(15 cm)) I Remote receiver I Lamp unit AN-C3CP2 AN-A1RS AN-MR2 AN-XR20LP (for XR-20X/XR-20S) AN-XR10LP (for XR-10X/XR-10S) Note • Some of the optional accessories may not be available depending on the region. Please check with your nearest Sharp Authorized Projector Dealer or Service Center. 10 - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 15
this operation manual where the topic is explained. Projector Top View Power indicator 27, 48 STANDBY/ON 27 button For turning the power on and putting the projector into standby For enlarging/ reducing the picture. 15 Remote control sensor Push both sides of the lens cap to attach or remove. 11 - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 16
pages in this operation manual where the topic RS-232C terminal Terminal for controlling the projector using a computer. 24 projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security System. Refer to the information that came with the system for instructions - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 17
the main pages in this operation manual where the topic is explained. STANDBY button 27 For putting the projector into the standby mode. KEYSTONE and [Page Up] keys on a computer keyboard when using the optional Remote Receiver (AN-MR2). BREAK TIMER 34 button For displaying the break time. - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 18
. • The batteries included with this projector may run down in a short period, depending on how they are kept. Be sure to replace them as soon as possible with new batteries. • Remove the batteries from the remote control if you will not be using the remote control for a long time. • Comply with - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 19
using the remote control • Ensure that you do not drop, expose to mois- ture or high temperature. • The remote control may malfunction under a fluorescent lamp. In this case, move the projector away from the fluorescent lamp. 30° Remote control signal transmitters 30° Remote control sensor 23n - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 20
_P. 18 2. Connect the projector to the computer and plug the power cord into the AC socket of the projector When connecting equipment other than the computer, see pages 24 and 25. _PP. 21-26 3. Remove the lens cap and turn the projector on On the projector On the remote control _P. 27 16 - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 21
, press TENTER to finish the Setup Guide. _P. 28 5. Turn the computer on 6. Select the INPUT mode Select the "INPUT 1" using the INPUT button on the projector or C INPUT 1 on the remote control. On the On the remote On-screen display (RGB) projector control • When pressing the INPUT button on - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 22
page 20 for additional information concerning "Screen Size and Projection Distance". Ceiling-mount Setup I It is recommended that you use the optional Sharp ceiling-mount bracket for this installation. Before mounting the projector, contact your nearest Sharp Authorized Projector Dealer or Service - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 23
Projection (PRJ) Mode The projector can use any of the 4 projection modes, shown in the diagram below. Select the mode most appropriate for the projection setting in use. (You can - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 24
Љ) מ35 cm (מ13 57/64Љ) מ32 cm (מ12 11/16Љ) מ28 cm (מ10 7/8Љ) מ23 cm (מ9 1/16Љ) מ15 cm (מ6 3/64Љ) ע52 cm (ע20 27/64Љ) ע47 cm (ע18 25/64Љ) ע42 cm (ע16 11/32Љ) ע31 cm (ע12 1/4Љ) ע28 cm (ע10 7/8Љ) ע22 cm (ע8 21/32Љ) ע21 cm (ע8 11/64Љ) ע19 cm (ע7 33/64 - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 25
video equipment with S-video output terminal (VCR, DVD player, etc.). (See page 24.) RS-232C terminal Connecting the computer to control the projector. (See page 26.) AUDIO OUTPUT terminal Connecting to an amplifier or other audio equipment with an audio cable (commercially available) (Shared - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 26
below. Equipment Input Signal Cable Terminal on the projector Computer RGB video RGB cable (supplied) INPUT1, 2 Audio-visual equipment ø3.5 mm stereo audio cable AUDIO INPUT Computer (commercially available or available as Sharp service part QCNWGA038WJPZ) audio Component video 3 RCA - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 27
may not be projected unless the computer's external output port is switched on. (e.g. Press "Fn" and "F5" keys simultaneously when using a SHARP notebook computer). Refer to the specific instructions in your computer's operation manual to enable your computer's external output port. Connections 23 - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 28
Connecting to Video Equipment The projector is equipped with input terminals that support component, S-video, and video component output terminal, use the COMPUTER/ COMPONENT terminal (INPUT1 or INPUT 2) on the projector for video connection. When using a 3 RCA (Component) to 15-pin D-sub cable - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 29
available) Composite video cable (commercially available) Connecting to a Monitor with RGB Input Terminal You can display computer images on both the projector and a separate monitor using two sets of RGB cables. Computer Monitor To INPUT 1 terminal To RGB output terminal To OUTPUT (INPUT - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 30
up. Refer to the operation manual of the computer for details. • See page 53 for connection of an RS-232C serial control cable. Info • Do not the computer. This may damage your computer or projector. • Do not connect or disconnect an RS-232C serial control cable to or from the computer while it is - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 31
standby mode and immediately turned on again, the lamp may take some time to start projection. STANDBY button ON button Turning the Power off (Putting the Projector into Standby Mode) 1 Press SSTANDBY/ON on the projector or eSTANDBY on the remote control, then press that button again while the - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 32
Image Projection Setup Guide screen About the Setup Guide After turning on the projector, the Setup Guide screen appears to assist you with projector setup. Guidance items 1 FOCUS 2 HEIGHT ADJUST 3 ZOOM Press TENTER to exit the Setup Guide screen. Note • The Setup Guide screen automatically high- - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 33
can be adjusted using the adjustment feet at the front and rear of the projector. When the screen is above the projector, the projection image can be made higher by adjusting the projector. 1 Lift the projector to adjust its height while lifting the HEIGHT ADJUST lever. 2 Remove your hands from - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 34
the appropriate input mode for the connected equipment. PressC INPUT 1, C INPUT 2, DINPUT 3 or EINPUT 4 on the remote control to select the input mode. • When pressing INPUT (P/R) on the projector, input mode switches in the following order: INPUT1 INPUT2 INPUT3 INPUT4 . • When "Auto Search" is set - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 35
. • The on-screen display of the Keystone Correction mode will disappear. • You can also use d KEYSTONE on the projector. When using XR-20X • The projector automatically detects tilt and the AUTO KEYSTONE feature automatically corrects trapezoidal distortion. Info • While adjusting the image using - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 36
800 K 600) XGA (1024 K 768) SXGA (1280 K 960) SXGA L (1400 K 1050) SXGA (1280 K 1024) 1280 K 720 NORMAL BORDER STRETCH XR-20X/10X XR-20S/10S XR-20X/10X XR-20S/10S XR-20X/10X XR-20S/10S 1024 K 768 800 K 600 768 K 576 600 K 450 1024 K 576 800 K 450 1024 K 768 J 800 K 600 J 768 K 576 J 600 - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 37
VIDEO • "STRETCH" is fixed when 540P, 720P or 1080I signals are entered. Input Signal DVD / Video Image type NORMAL Output screen image BORDER STRETCH 4:3 aspect ratio 480I, 480P, 576I, 576P, NTSC, PAL, SECAM Letter box Squeezed 16:9 image Squeezed 4:3 image 540P, 720P, 1080I 16:9 - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 38
Operating with the Remote Control Adjustment buttons (P/R/O/Q) BREAK TIMER button FREEZE button PICTURE MODE button AUTO SYNC button Auto Sync (Auto Sync Adjustment) Auto Sync function works when detecting input signal after the projector turns on. Press FAUTO SYNC to manually adjust with Auto - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 39
buttons on the remote control. *1 Items when inputting RGB signal through INPUT 1 or INPUT 2. *2 Items when inputting component signal through INPUT 1 or INPUT 2, or when selecting INPUT 3 or INPUT 4. *3 Adjustment range for XR-20X/XR-10X. *4 Adjustment range for XR-20S/XR-10S. *5 An item which - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 40
On On On On On 9600 bps Normal Help Main menu PRJ - ADJ Page 43 Lamp Timer(Life) 0h 100% SEL./ADJ. ENTER END Auto Search [On/Off] Page 43 On/Off] Page 43 RS-232C Page 44 Fan Mode Page 44 System Lock Page 44 Lamp Timer(Life) Page 44 Sub menu 9600 bps 115200 bps Normal High Old Code New Code - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 41
"Bright". • This operation can also be performed by using the buttons on the projector. 1 Press BMENU. • The "Picture" menu screen for the selected input mode Contrast Bright Red Blue CLR Temp Bright Boost Lamp Setting Reset 0 0 0 0 7500K 1 Standard Bright Help SEL./ADJ. ENTER END Useful Features - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 42
ADJ PRJ - ADJ Picture Mode Contrast Bright Red Blue CLR Temp Bright Boost Lamp Setting Reset 0 15 0 0 7500K 1 Standard Bright SEL./ADJ. Single ADJ Help END Note • Menu buttons do not function while the projector is operating the "Auto Sync", "Break Time", "FREEZE", or "AV MUTE" functions. 38 - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 43
- ADJ PRJ - ADJ Help Picture Mode Contrast Bright Color Tint Sharp CLR Temp Bright Boost Progressive Lamp Setting Reset SEL./ADJ. 0 0 0 0 0 7500K 1 retained in memory. Note • You can also press G PICTURE MODE on the remote control to select the picture mode. (See page 34.) • *sRGB is an - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 44
For making skin tones purplish. For less sharpness. For high fidelity color reproduction. For more encoded as is at 24 frames/second. The projector can convert this film source to progressive video only for general standard purposes. 40 5 Lamp Setting Selectable items Brightness Eco + Approx. - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 45
", select "Keystone", and then adjust with the slide bar. Manual Correction Q or P button O or R button O button Q button Useful Features Note • You cannot set this item when "Resize" is set to "Normal". a When using XR-20S, XR-10X or XR-10S Select "Keystone" on the "SCR-ADJ" menu and adjust - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 46
Language Selectable items Logo Blue None Description Sharp logo screen Blue screen - 6 Selecting the Setup Guide Selectable items On Off Description Displaying the Setup Guide when turning the projector on. Not displaying the Setup Guide. The projector can switch the on-screen display language - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 47
by pressing F AUTO SYNC on the remote control. • The Auto Sync adjustment may take some time to complete, depending on the image of the computer connected to the projector. • When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjustments. (See page 46.) Selectable items - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 48
keycode, contact your nearest Sharp Authorized Projector Dealer or Service Center (see page 61). Lamp Setting set to "Bright" Remaining lamp life 100% Approx. 3,000 hours Approx. 2,000 hours 5% Approx. 150 hours Approx. 100 hours 1 Press the 4 buttons on the remote control or on the projector - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 49
B MENU/HELP • System lock function recognizes each button on the remote control or on the projector as an individual button, even if they share the same button name the projector simultaneously for about 5 seconds. Info • Keylock does not function while the projector is: displaying the "Setup Guide" - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 50
marks (✔). • The items in the "Help" menu change, de- pending on the input signal or setting that you have selected. • If the problem is not solved, refer to "Troubleshooting". (see pages 59 and 60) • When selecting "sRGB" in "Picture Mode", the item "Color is faded or poor" is not displayed. This - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 51
with water Appendix Mild detergent Wax Thinner Info • If you want to clean the air vents during projector operation, be sure to press S STANDBY/ON on the projector or eSTANDBY on the remote control and put the projector into standby mode. After the cooling fan has stopped, clean the vents. 47 - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 52
and temperature warning indicator) on the projector indicate problems inside the projector. I If a problem occurs, either the temperature warning indicator or the lamp indicator will illuminate red, and the projector will enter standby mode. After the projector has entered standby mode, follow the - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 53
Problem The internal temperature is abnormally high. The lamp does not illuminate. Time to change the lamp. The lamp does not illuminate. The power indicator blinks in red when the projector lamp. (See page 51.) • Take the projector to your nearest Sharp Authorized Projector Dealer or Service Center - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 54
very hot and may cause burn or injury. I Carefully change the lamp by following the instructions described in this section. * If you wish, you may have the lamp replaced at your nearest Sharp Authorized Projector Dealer or Service Center. * If the new lamp does not light after replacement, take your - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 55
Do not remove the lamp unit from the projector right after use. The lamp and parts around the lamp will be very hot and may cause burns or injury. Optional accessory Lamp unit AN-XR20LP (for XR-20X/XR-20S) AN-XR10LP (for XR-10X/XR-10S) Info • Make sure that you remove the lamp unit by the handle - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 56
tighten the user service screw to secure the lamp unit cover. Info • If the lamp unit and lamp unit cover are not correctly installed, the power will not turn on, even if the power cord is connected to the projector. Securing screws 2 1 Resetting the Lamp Timer Reset the lamp timer after replacing - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 57
Earth (PR) 7. Earth (Y) 8. Earth (PB) 9. Not connected 10. Not connected 11. Not connected 12. Not connected 13. Not connected Note • Depending on the controlling device used, it may be necessary to connect Pin 4 and Pin 6 on the controlling device (e.g. computer). Projector Computer Pin No. Pin - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 58
Return code (0DH) Command 4-digit Response code format Normal response Parameter 4-digit Problem response (communication error or incorrect command) O K Return code (0DH) E R R Return code (0DH) Info • When controlling the projector using RS-232C commands from a computer, wait for at least 30 - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 59
Usage Time (Hour) T L T T _ _ _ 1 0 - 9999 (Integer) Lamp Life (Percentage) T L T L _ _ _ 1 0% - 100% (Integer) Model Name Check T N A M _ _ _ 1 XR10S / XR10X /XR20S / XR20X Model Name Check M N R D _ _ _ 1 XR-10S / XR-10X / XR-20S / XR-20X Projector Name Setting 1 P J N 1 * * * * OK or ERR - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 60
RS-232C Specifications and Command Settings (Continued) CONTROL CONTENTS INPUT 1 Picture Mode : Presentation INPUT 1 Picture Mode 30 - 30) INPUT 1 Red (30 - 30) INPUT 1 Blue (30 - 30) INPUT 1 Sharp (30 - 30) INPUT 1 CLR Temp *2 INPUT 1 Bright Boost (0 - 2) INPUT 1 Progressive : - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 61
CONTROL CONTENTS COMMAND PARAMETER Power ON INPUT 4 Sharp (30 - 30) INPUT 4 CLR Lamp Setting : EcoQuiet Auto Search : Off Auto Search : On Auto Power Off : Off Auto Power Off : On Auto Keystone : Off (XR-20X only) Auto Keystone : On (XR : Setup Guide : Off Setup Guide : On System - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 62
with the signals below in intelligent compression XR-20X/XR-10X: SXGA, SXGA+ XR-20S/XR-10S: XGA, SXGA, SXGA+ • Intelligent Compression and Expansion System resizing technology The following is a list of modes that conform to VESA. However, this projector supports other signals that are not VESA - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 63
Troubleshooting Problem Check Page • Projector power cord is not plugged into the wall outlet. • Power to the external connected devices is off. • The selected input mode is wrong. • Cables incorrectly connected to the projector. • Remote control the focus range. 20 (Computer Input only) - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 64
Troubleshooting (Continued) Problem Check Picture is green on • Change the input signal type setting projector increases, the cooling fan noisy. runs faster. The lamp does not light • The lamp indicator is illuminating in red. up even after the Replace the lamp. projector turns on. The lamp - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 65
If you encounter any problems during setup or operation of this projector, first refer to the "Troubleshooting" section on pages 59 and 60. If this operation manual does not answer your question, please contact the SHARP Service departments listed below. U.S.A. Sharp Electronics Corporation 1-888 - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 66
parts Remote control, Power cord for U.S. and Canada, etc., Power cord for Europe, except U.K., Power cord for U.K. and Singapore, Power cord for Australia, New Zealand and Oceania, RGB cable, Operation manual (Printed and CD-ROM) As a part of policy of continuous improvement, SHARP reserves - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 67
Dimensions Units: inches (mm) 13 64/ (5) 11 1/32 (280) 23 64/ (9) 7/16 (11) 4 19 64/ (109) 2 7/8 (73) 1 55 64/ (47) ø9 7/64 (69.2) 3 5/32 (80) 12 /13 32 (315) 3 1/16 (77.5) 7/16 (11) 1 7/8 (47.5) 4 7/64 (104) 1 /11 32 (33.8) 2 /61 64 (75) 1 /53 64 (46.2) 2 /19 32 (65.5) 63 Appendix - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 68
29 Red 40 Remote control 13 Remote control sensor 15 Replacing the lamp 50, 51 Resize 32, 41 RESIZE button 32 RETURN button 37 RGB cable 23 OUTPUT (INPUT1, 2) terminal 25 RS-232C terminal 26 SCR - ADJ 41 Screen Size and Projection Distance 20 Setup Guide 28, 42 Sharp 40 Speaker 43 - Sharp XR-20X | XR10S|XR10X|XR20S|XR20X Operation Manual - Page 69
SHARP CORPORATION
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
 |
 |
MULTIMEDIA PROJECTOR
MODEL
XR-20X/XR-20S
XR-10X/XR-10S
OPERATION MANUAL
Introduction
Quick Start
Setup
Connections
Basic
Operation
Useful
Features
Appendix