Singer 7470 Confidence Instruction Manual - Page 18

Threading The Bobbin Thread

Get Singer 7470 Confidence PDF manuals and user guides View all Singer 7470 Confidence manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

THREADING THE BOBBIN THREAD 1. Raise the needle to its highest position by rotating the hand 1 wheel toward you. 2. Remove the bobbin cover plate by pushing the release button to the right. Bobbin cover will pop up sufficiently to 2 allow you to remove the cover. 3. Insert the bobbin making sure the bobbin rotates counterclockwise when you pull the thread. 3 NOTE: This is a very important step as the bobbin can become unthreaded and cause sewing problems if it rotates clockwise. 4. Pull thread through the slot (A) and then to the left. 4 5. With a finger held gently on top of the bobbin, pull the 5 thread until it stops in the slot (B). Then pull the thread along the groove on the needle plate until it is snipped with cutter on the top left. NOTE: Sewing can be started without picking up the bobbin thread. 6. Replace the bobbin cover plate onto the needle plate. 6 A Cutter Coupeur Cortador Groove Cannelure Surco B A 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
±8
6
5
4
3
²
±
A
THREADING THE BOBBIN THREAD
1. Raise the needle to its highest position by rotating the hand
wheel toward you.
2. Remove the bobbin cover plate by pushing the release
button to the right. Bobbin cover will pop up sufficiently to
allow you to remove the cover.
3. Insert the bobbin making sure the bobbin rotates counter-
clockwise when you pull the thread.
4. Pull thread through the slot (A) and then to the left.
5. With a finger held gently on top of the bobbin, pull the
thread until it stops in the slot (B). Then pull the thread
along the groove on the needle plate until it is snipped with
cutter on the top left.
6. Replace the bobbin cover plate onto the needle plate.
NOTE: This is a very important step as the bobbin
can become unthreaded and cause sewing problems
if it rotates clockwise.
NOTE: Sewing can be started without picking up the
bobbin thread.
A
B
Groove
Cannelure
Surco
Cutter
Coupeur
Cortador