Singer 9100 Professional Instruction Manual

Singer 9100 Professional Manual

Get Singer 9100 Professional PDF manuals and user guides View all Singer 9100 Professional manuals
Add to My Manuals
Save this manual to your list of manuals

Singer 9100 Professional manual content summary:

  • Singer 9100 Professional | Instruction Manual - Page 1
    Model 9100 Instruction Manual
  • Singer 9100 Professional | Instruction Manual - Page 2
    threading needle, changing needle, threading bobbin, changing presser foot or changing the light. 10. Always unplug sewing machine from the electrical outlet when removing covers, lubricating, or when making any other user servicing adjustments mentioned in the instruction manual. 11. Never drop or
  • Singer 9100 Professional | Instruction Manual - Page 3
    SOURCE 9 Connecting the machine 9 WINDING THE BOBBIN 10-11 Bobbin winding 10-11 INSERTING THE BOBBIN 12 THREADING THE UPPER THREAD 13-14 USING THE NEEDLE THREADER 15 DRAWING UP THE LOWER THREAD 16 CUTTING THE THREAD 16 TWO-STEP PRESSER FOOT LIFTER 17 STARTING SEWING 18 Start/stop button
  • Singer 9100 Professional | Instruction Manual - Page 4
    66-67 Warning animation message display 66 Instruction animation message display 66 Warning beeping sound 67 BUZZER SOUND 68 MAINTENANCE 69-70 Cleaning the screen 69 Cleaning the sewing machine surface 69 Cleaning the hook 69-70 TROUBLE SHOOTING GUIDE 71-72 STITCH ADJUSTMENT REFERENCE CHART
  • Singer 9100 Professional | Instruction Manual - Page 5
    PARTS OF THE MACHINE Tension dial Face plate Operation buttons A Thread cutter Buttonhole lever Auto needle threader Needle plate cover Sewing table and accessory box Hole for second spool pin Handwheel Main power switch Power cord socket Foot controller connector 1 Bobbin winder spindle Speed
  • Singer 9100 Professional | Instruction Manual - Page 6
    Start/stop button Press this button to start or stop the machine. 2. Reverse button Hold down this button to sew stitches in reverse or sew reinforcement stitches at a low speed. 3. Auto-lock button Hold down this button to sew locking stitches immediately or at the end of the current patterns and
  • Singer 9100 Professional | Instruction Manual - Page 7
    MACHINE CONTROL BUTTONS 7. Stitch length adjustment buttons Press this button to adjust the length of the stitch. 8. Twin needle button Press this button to fix the width range when using the twin needle to sew. 9. Mirror button Press this button to sew a reflection pattern. 10. Elongation button
  • Singer 9100 Professional | Instruction Manual - Page 8
    SYMBOL INSTRUCTIONS Raise needle Raise presser foot Lower presser foot
  • Singer 9100 Professional | Instruction Manual - Page 9
    LCD SCREEN Pattern Reverse Auto-lock Needle up position Twin needle Suggested presser foot and identification letter Bobbin winding Buttonhole lever Sound on Pattern Needle position Tension Stitch length Auto-stop Mirror Needle down position Pattern number Sound off Alphabet Stitch width
  • Singer 9100 Professional | Instruction Manual - Page 10
    LCD SCREEN Memory Editing patterns Edit mode Memory group Number of current unit M EDIT Total number of unit Sewing the memorized pattern Memory mode M Elongation Elongation Pattern to edit Amount of elongation 5
  • Singer 9100 Professional | Instruction Manual - Page 11
    PATTERN CHART The portions marked in gray (on the chart below) show the single unit of each stitch. Patterns Direct Patterns-10 123 4 5 6 7 8 9 0 A Group Patterns-100 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43
  • Singer 9100 Professional | Instruction Manual - Page 12
    PATTERN CHART 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 Alphabets Block style 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
  • Singer 9100 Professional | Instruction Manual - Page 13
    Satin stitch foot A 006172008 Button sewing foot 006914008 Brush/ Seam ripper 006099008 Spool holders (L & S) Edge/quilting guide Bobbin (3x) Screwdriver (L & cover 020L004000 Cording foot M 006813008 Quilting foot P 006916008 SINGER style 2025 twin needle 006161008 Walking foot 0061850081 8
  • Singer 9100 Professional | Instruction Manual - Page 14
    on a stable surface. 1. Connect the power line cord to the machine by inserting the 2-hole plug into the power cord socket. 2. Connect the power line plug to the electric outlet. 3. Turn on the power switch. 4. The sewing lamp will light up when the switch is turned on. To disconnect, turn the
  • Singer 9100 Professional | Instruction Manual - Page 15
    slit, place this end of the spool toward the right, so the thread doesn't get caught while winding the bobbin. 2 Snap the thread into the thread guide. 2 3 Wind the thread counter-clockwise around the bobbin winder tension disks. 3 4 Place the thread end through one of the inner holes in the
  • Singer 9100 Professional | Instruction Manual - Page 16
    stops automatically when the bobbin is full. Stop the machine. Push the bobbin winder spindle to left. 9 10 Cut the thread and then remove the bobbin. 10 Please Note: When the bobbin winder switch is placed on the right, "bobbin winding position", the machine will not sew and the handwheel will
  • Singer 9100 Professional | Instruction Manual - Page 17
    direction (arrow). 22 Pull the thread through the slit (A). A 2 B A 3 B C 4 33 With a finger held gently on top of the bobbin. Draw the thread at the arrow markings into the stitch plate thread guide from (A) to (B). 44 Pull the thread at the arrow markings into the stitch plate thread
  • Singer 9100 Professional | Instruction Manual - Page 18
    5 7 8 Please Note: It is important to carry out the threading correctly as by not doing so several sewing problems could result. Start by raising the needle to its highest point, and also raise the presser foot to release . 22 Draw the thread from the spool through the upper thread guide. 2 13
  • Singer 9100 Professional | Instruction Manual - Page 19
    through the slotted eye of the take-up lever and then downwards again. 6 77. Pass the thread behind the flat, horizontal thread guide. Guide the thread through the thread guide located above the needle. Pull the end of the thread through the needle from front to rear, and pull out about 10 cm
  • Singer 9100 Professional | Instruction Manual - Page 20
    the needle to its highest position and lower the presser foot. 11 Lower the needle threader lever slowly and draw the thread through the thread guide as illustrated and then to the right. 1 22 The needle threader automatically turns to the threading position and the hook pin passes through the
  • Singer 9100 Professional | Instruction Manual - Page 21
    the handwheel towards you (counterclockwise) lowering, then raising the needle. 1 22 Gently pull on the upper thread to bring the bobbin thread up through the needle plate hole. The bobbin thread will come up in a loop. 2 33 Pull both threads to the back under the presser foot. 3 CUTTING THE THREAD
  • Singer 9100 Professional | Instruction Manual - Page 22
    TWO-STEP PRESSER FOOT LIFTER The presser foot lifter raises and lowers the presser foot. When sewing several layers or thick fabrics, the presser foot can be raised a second stage for easy positioning of the work. 17
  • Singer 9100 Professional | Instruction Manual - Page 23
    turned off, insert the foot control plug into its connector on the sewing machine. Turn on the sewing machine, and then slowly depress the foot control to start sewing. Release the foot control to stop the sewing machine. Please Note: The setting of the speed limiting adjustment lever will limit
  • Singer 9100 Professional | Instruction Manual - Page 24
    side of your fabric. Reverse side Upper thread 1 Bobbin thread Reverse side Upper thread 2 Bobbin thread Reverse side Upper thread 3 Bobbin thread Reverse side Upper thread 4 Bobbin thread Surface 11 Normal thread tension for straight stitch sewing. Surface 22 Thread tension is too loose for
  • Singer 9100 Professional | Instruction Manual - Page 25
    presser foot (f) will engage automatically. 3 Removing the presser foot Raise the presser foot. Raise the lever (e) and the foot will disengage. 4 Attaching the edge/guilting guide The edge/quilting guide (g) can be attached as illustrated. Adjust as needed for hems, pleats, quilting, etc. 20
  • Singer 9100 Professional | Instruction Manual - Page 26
    used for some stitches, offering more stitching options. For more information, go to the section: USING THE TWIN NEEDLE) PRESSER FOOT APPLICATION General sewing, Patchwork stitches, Decorative stitching, Smocking, Fagoting, etc. All purpose foot (T) NEEDLE PRESSER FOOT APPLICATION Satin stitch
  • Singer 9100 Professional | Instruction Manual - Page 27
    MATCHING NEEDLE/ FABRIC/ THREAD NEEDLE, FABRIC, THREAD SELECTION GUIDE NEEDLE SIZE FABRICS THREAD 9-11 (70-80) Lightweight - In general, fine threads and needles are used for sewing fine fabrics, and thicker threads are used for sewing heavy fabrics. - Always test thread and needle size on
  • Singer 9100 Professional | Instruction Manual - Page 28
    problems. Insert the needle following the illustrated instructions. Problems can occur with: - Bent needles - Blunt needles - Damaged points RAISE OR LOWER THE FEED DOGS With the sewing table off the machine, the feed dogs adjustment lever can be seen on the base in back of the sewing machine
  • Singer 9100 Professional | Instruction Manual - Page 29
    will start running when start/stop button is pressed and will stop when pressed the second time. The machine will rotate slowly at the beginning of sewing. The sewing speed will increase slowly until reaching the speed setting selected with the speed limiting adjustment lever. The foot control
  • Singer 9100 Professional | Instruction Manual - Page 30
    stopped. When Direct Patterns 5-9, A Group Patterns 01-13 , 28-99, and B Group Patterns 00-99 are selected, press the Auto-lock button, the machine will sew 3 locking stitches at the end of the current pattern and automatically stop. The function will be cancelled if you press the button once again
  • Singer 9100 Professional | Instruction Manual - Page 31
    buttons Stitch length adjustment buttons Twin needle button Mirror button Elongation button Stitch width adjustment button When you select a stitch, the machine will automatically set the recommended stitch width, which will be indicated by numbers on the LCD screen. The stitch width can be
  • Singer 9100 Professional | Instruction Manual - Page 32
    stitches have a limited length. MODE selection button Elongation button (see page 59) The LED light will be set at direct mode " " when start the machine. By pressing the button, LED light will move step by step to select the stitch mode, as shown. Direct mode stitch selection. Utility and satin
  • Singer 9100 Professional | Instruction Manual - Page 33
    1-9, A Group Patterns 0013, 28-99, and B Group Patterns 00-99 can be mirror imaged along a vertical axis by pressing the " " button. The machine will continue to sew the reflected pattern until the mirror button is pressed again. The mirror function also will be canceled if the pattern changed. The
  • Singer 9100 Professional | Instruction Manual - Page 34
    SELECTION BUTTONS Edit button Memory button Clear button Direct pattern selection and number buttons Direct pattern selection and number buttons Direct pattern selection Press the buttons to select the utility patterns shown beside the number button when the mode button is set at the Direct mode.
  • Singer 9100 Professional | Instruction Manual - Page 35
    button to set the selected pattern under the editing mode, the LED light will turn on. Manual setting function of the stitch width, stitch length, mirror, elongation and auto-lock for these memorized to remove an added pattern when sewing combinations of characters or decorative stitches. 30
  • Singer 9100 Professional | Instruction Manual - Page 36
    corners 3 2 1 4 Reverse Free arm 1. Stop the sewing machine when you reach a corner. 2. Lower the needle into the fabric 5 manually or by pressing the needle up/ down button once. 3. Raise the presser foot. 4. Use the needle as a pivot and turn the fabric. 5. Lower the presser
  • Singer 9100 Professional | Instruction Manual - Page 37
    of the extension table into (B) of the machine. A B 3 Sewing on heavy fabrics The black button on the seam and helps when sewing multiple layers of fabric such as sewing over seams when hemming continue sewing. Cardboard or thick fabric The black button releases automatically after sewing few
  • Singer 9100 Professional | Instruction Manual - Page 38
    NEEDLE POSITION AND STITCH LENGTH A-00 0.0 2.0 3.5 5.0 7.0 0.5 1.0 2.0 3.0 4.5 ZIGZAG STITCHES Changing the needle position These setting apply only to Direct Patterns 1-4, or A Group Pattern 00. The pre-set position is "3.5", center position. When you press the " – " of stitch width adjustment
  • Singer 9100 Professional | Instruction Manual - Page 39
    STRETCH STITCHES Stretch stitches Straight stitch Stretch stitches are strong and flexible and will give with the fabric without breaking. Good for easy to ravel and knit fabrics. It is good for joining durable fabric such as denims. These stitches can also be used as a decorative top stitch.
  • Singer 9100 Professional | Instruction Manual - Page 40
    foot E 5.0~7.0 2.0~3.0 1 2 11 Change the presser foot to the overcasting foot. 22 Sew the fabric with the fabric edge against the guide of the overcasting foot. Attention: The overcasting foot should be used to sew with Direct Patterns 5 and 8 only. Do not set the stitch with narrower than
  • Singer 9100 Professional | Instruction Manual - Page 41
    swings fully to the left. It should just pierce the fold of the fabric. If it does not, adjust the stitch width accordingly. 3 Adjust the guide (b) by turning the knob (a) so that the guide just rests against the fold. 4 Sew slowly, guiding the fabric carefully along the edge of the
  • Singer 9100 Professional | Instruction Manual - Page 42
    the button. 4 Turn the handwheel to check that the needle goes cleanly into the left and right holes of the button. 5 Before sewing, press the Auto-lock button to sew reinforcement stitches automatically at the beginning and at the end of the stitch. If a shank is required, place a darning needle on
  • Singer 9100 Professional | Instruction Manual - Page 43
    fabrics A-19: For jeans or trousers A-20: For jeans or stretch fabric with a coarse weave A-21: For stretch fabric 3.0~7.0 1.0~3.0 Please Note: Before sewing a buttonhole on your project, practice on a scrap piece of the same type of fabric. 1 Mark the positions of the buttonhole on the fabric. The
  • Singer 9100 Professional | Instruction Manual - Page 44
    BUTTONHOLE SEWING 3 Select the buttonhole stitch. Adjust the stitch width and the stitch length to the desired width and density. Starting 3 point 4 display the figure " ", to remind you to lower the buttonhole lever. 5 While lightly holding the end of upper thread and start sewing. 5 39
  • Singer 9100 Professional | Instruction Manual - Page 45
    BUTTONHOLE SEWING 0 A-14 A-16 A-17 A-15 A-18 A-19 A-20 A-21 6 7 66 Buttonholes are sewn from the front of the presser foot to the back, as shown. 77
  • Singer 9100 Professional | Instruction Manual - Page 46
    the foot and insert them into the grooves, then temporarily tie them there. Lower the presser foot and start sewing. Set the stitch width to match the diameter of the gimp thread. 1 2 Once sewing is completed, pull the gimp thread gently to remove any slack, then trim off any excess. 2 Please Note
  • Singer 9100 Professional | Instruction Manual - Page 47
    foot. 22 Pull the button holder to the rear. Set the 2 button guide plate on the buttonhole foot to the desired length. 33 Position the fabric so that the needle is 2mm (1/16") in front of where you want the sewing to start, and then lower the presser foot. 2mm 3 4 Starting point
  • Singer 9100 Professional | Instruction Manual - Page 48
    33 Lower the needle into the fabric at the beginning of the stitching, and then lower the presser foot lever. Once sewing is completed, the machine automatically sews reinforcement stitches, then stops. 3 44 Make a hole at the center using an eyelet punch. * Eyelet punch is not included with the
  • Singer 9100 Professional | Instruction Manual - Page 49
    . Lower the presser foot over the center of the tear. NOTE Make no gap here 2 33. Pull the button holder to rear. Set the button guide plate on buttonhole foot to the desired length. 3 Stop Stop a a Start b 4 Start b 44. The size of the darning cycle is variable. However, the maximum stitch
  • Singer 9100 Professional | Instruction Manual - Page 50
    lever is positioned behind the bracket on the buttonhole foot. Gently hold the end of the upper thread in your left hand, and then start sewing. Please Note: When you select any buttonhole pattern or darning pattern, the LCD screen will display the figure " " to remind you to lower the buttonhole
  • Singer 9100 Professional | Instruction Manual - Page 51
    1.5~3.0 Inserting a centered zipper 2 inch Attention: Zipper foot should be used with machine set for straight stitch in center needle position. It is possible that the needle could hit the presser foot and break when sewing other patterns. 11 Baste the zipper opening on the garment. 1 2 22
  • Singer 9100 Professional | Instruction Manual - Page 52
    Attach the right side of the presser foot pin to the holder when sewing the left side of the zipper. Attach the left side of the presser foot pin to the presser foot holder when sewing the right side of the zipper. 44 Stitch the left side of zipper
  • Singer 9100 Professional | Instruction Manual - Page 53
    needle into the fold by rotating the handwheel toward you, and lower the presser foot. Sew several stitches and raise the presser foot. Insert the fabric fold into the spiral opening of Lower the presser foot and start sewing, slowly guiding the raw edge of the fabric in front of the rolled hem foot
  • Singer 9100 Professional | Instruction Manual - Page 54
    . Select the stitch and adjust the stitch width so that the stitches are just covering the cord. Lower the foot and sew slowly, guiding the cord over the design. Push the sewing thread to the left and insert three cords into the grooves of the foot and pull about 5cm (2 inches) of the
  • Singer 9100 Professional | Instruction Manual - Page 55
    46 A-47 A-48 A-49 A-50 A-51 A-52 A-53 A-54 A-55 A-56 A-57 A-58 A-59 A-60 A 3.5~7.0 0.5~2.0 Use the satin stitch foot for satin stitching and sewing decorative stitches. This foot has a groove on the underside which allows dense stitching to pass freely underneath. To change the satin or decorative
  • Singer 9100 Professional | Instruction Manual - Page 56
    1 P 3.5 1.0~3.0 * The quilting foot is an optional accessory. Insert the edge/quilting guide in the presser foot holder as illustrated and set the space as you desire. Sew the first row and move over the fabric to sew successive rows with the guide riding along the previous row of stitching. 51
  • Singer 9100 Professional | Instruction Manual - Page 57
    foot. Place fabric to be gathered under the presser foot. Sew a row of stitching. The stitches will automatically cause the fabric the fabric right side down in the slot. - Guide the two layers as illustrated. Note: When testing machine for adjustments to achieve desired fullness, work with 10
  • Singer 9100 Professional | Instruction Manual - Page 58
    to gather the fabric. 22 Knot the threads along one edge. Pull the bobbin threads and distribute the gathers evenly. Secure the threads at the other end. 33 Reduce the tension, if necessary and sew decorative pattern stitches between the straight seams. 44 Pull out the gathering stitches. 4 53
  • Singer 9100 Professional | Instruction Manual - Page 59
    darning foot on firmly from behind with your index finger and tighten the screw (c). Darning Please Note: Free motion darning is accomplished without the sewing machine internal feed system. Movement of the fabric is controlled by the operator, best by using an embroidery hoop (not included). It is
  • Singer 9100 Professional | Instruction Manual - Page 60
    . Select zigzag stitch pattern and adjust the stitch width as desired. When sewing, make sure to maintain a constant speed. Fill in the design working Select the zigzag stitch pattern and adjust the stitch width as desired. Sew at a constant speed, moving the hoop slowly along the lettering. When
  • Singer 9100 Professional | Instruction Manual - Page 61
    easier to guide the fabric and you have a better view of the seam when using the standard, regular foot on your machine. Your sewing machine offers excellent tightly secured. 44 Draw the bobbin thread up and place both 4 the bobbin thread and the needle thread behind the walking foot attachment.
  • Singer 9100 Professional | Instruction Manual - Page 62
    with the center of the two pieces of fabric and begin sewing. 33 After sewing, remove the paper. DECORATIVE TOPSTITCHING A-08 A-86 A-09 A-10 A- 61 A 11 Place the two fabrics, right sides together, and sew using a straight stitch. 1 2 22 Open the seam allowance and press it
  • Singer 9100 Professional | Instruction Manual - Page 63
    Wrong side of fabric 1 2 11 Fold the fabric, right sides together. Sew along the folded edge, as illustrated. 22 Cut the fabric along the seam surface and press it. 3 Scallop edging A-13 A-35 A 11 Sew on hem line. 22 Trim the fabric close to the stitching taking care not to cut the thread.
  • Singer 9100 Professional | Instruction Manual - Page 64
    ELONGATION A-28 A-29 A-30 A-31 A-32 A-33 A-34 A-35 A-36 A-37 A-38 A-39 A-40 A-41 A-42 A-43 A-44 A-45 A-46 A-47 A-48 A-49 A-50 A-51 A 2.5~7.0 0.3~1.0 11 The stitches shown in the diagram above can be elongated up to five times the normal length by pressing the elongation button. 1 22 The LCD
  • Singer 9100 Professional | Instruction Manual - Page 65
    other patterns. 11 Select the pattern. 1 22 Pressing the mirror button. 2 3 A B 33 The LCD screen icon for mirror imaging of the pattern appears. A. Normal pattern sewing. B. Mirror pattern sewing. 60
  • Singer 9100 Professional | Instruction Manual - Page 66
    twin needle. For more information, go to www.singer.com. Use of any other type of twin needle may possibly bend the needle or damage the machine. Bent needles can easily 1 break, possibly resulting in injury. 22 Follow the instructions for single-needle threading using the horizontal spool
  • Singer 9100 Professional | Instruction Manual - Page 67
    for later use. Since stored patterns are not lost after the sewing machine is turned off, they can be recalled at any time. patterns selecting from pattern modes , , , can be combined and sewn together. - This machine has 4 modules of program memory and each module can retain 20 units of stitches. -
  • Singer 9100 Professional | Instruction Manual - Page 68
    Repeat step 5, 6 for more patterns to be stored in the memory. M 7 Please Note: When the memory the full with 20 units of patterns, the machine will beep to signal it. M 8 98 Press the " " button to leave the memory mode and return to the normal screen. 9 Adding patterns or letters M Attention
  • Singer 9100 Professional | Instruction Manual - Page 69
    . Please Note: The stitch length, stitch width, Elongation, Mirror, and Auto-lock of the patterns can be adjusted manually. 44 Press the " " button when complete and return to browse status. Clearing patterns or letters 11 While in the memory mode, press stitch width adjustment
  • Singer 9100 Professional | Instruction Manual - Page 70
    patterns by pressing stitch M width " – " or " + " buttons. 3 44 Press on the foot control or press the start/stop button to start the sewing machine. 4 M 55 The screen shows the current sewing pattern. 5 66 Press the "000" button to leave memory mode and return to the normal screen. 6 65
  • Singer 9100 Professional | Instruction Manual - Page 71
    cannot move. Please look through the "Trouble shooting guide" on page 71 or 72 to find the solution. After the problem has been solved, the machine will continue to sew. Instruction animation message display Bobbin winding The bobbin winder is winding the bobbin. Lower the buttonhole lever When you
  • Singer 9100 Professional | Instruction Manual - Page 72
    and the hand wheel axle can't move. Please refer to the "Trouble shooting guide" on pages 71 & 72 for solutions. After the problem has been solved, the machine will continue to sew. Return bobbin winder shaft to left If the bobbin winder shaft is positioned to the right (engaged) and any button is
  • Singer 9100 Professional | Instruction Manual - Page 73
    BUZZER SOUND ON OFF 1 11 Press on the " power switch. " button and turn on the 22 You can select the mode by pressing the stitch width " + " or " – " button. Select desired mode sound on " "or sound off " ". 2 33 Pressing the "0000" button. The Buzzer sound setting mark will appear on the LCD
  • Singer 9100 Professional | Instruction Manual - Page 74
    the sewing machine surface If the surface of the sewing machine is machine. Check regularly and clean the stitching mechanism when necessary. Attention: Disconnect the machine from the wall outlet before carrying out any maintenance. 11 Remove the bobbin cover plate and bobbin. 1 22 Clean the bobbin
  • Singer 9100 Professional | Instruction Manual - Page 75
    holding the needle plate and remove the needle plate. 44 Lift up the bobbin case and remove it. 4 55 Clean the hook race, feed dog and bobbin case with a brush. Also clean them, using a soft, dry cloth. 5 66 Replace the bobbin case into the hook race so that the tip (a) fits to the
  • Singer 9100 Professional | Instruction Manual - Page 76
    TROUBLE SHOOTING GUIDE Before calling for service, check the following items. If the problem still persists, contact Singer at www.singer.com Problem Cause Correction Reference 1.The machine is not threaded correctly. 1.Rethread the machine. Upper thread breaks 2.The thread tension is too
  • Singer 9100 Professional | Instruction Manual - Page 77
    TROUBLE SHOOTING GUIDE Problem Cause Correction Reference Seam puckering Patterns are distorted The machine jams The machine is noisy Uneven stitches, uneven feed The sewing machine are packed with lint. Remove the upper thread and bobbin case. Turn the handwheel backwards and forwards by hand
  • Singer 9100 Professional | Instruction Manual - Page 78
    Stitch Pattern 1 2 3 4 Utility 5 stitches 6 7 8 9 0 Width (mm) Auto Manual 3.5 0.0~7.0 0.0 0.0~7.0 3.5 0.0~7.0 3.5 1.0~6.0 5.0 0.0~7.0 5.0 2.0~7.0 5.0 2.5~7.0 5.0 3.5~7.0 3.5 2.5~7.0 5.0 2.5~7.0 Length (mm) Auto Manual 2.5 0.0~4.5 Presser Foot T Functions Reverse Auto-lock Elongation Mirror
  • Singer 9100 Professional | Instruction Manual - Page 79
    45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 Cross 61 stitches 62 Width (mm) Length (mm) Auto Manual Auto Manual
  • Singer 9100 Professional | Instruction Manual - Page 80
    7.0 2.5~7.0 7.0 2.5~7.0 5.0 2.5~7.0 6.0 2.5~7.0 5.0 2.5~7.0 4.0 2.5~7.0 5.0 2.5~7.0 5.0 4.0~7.0 6.0 3.5~7.0 5.0 2.5~7.0 6.0 4.0~7.0 5.0 4.0~7.0 5.0 2.5~7.0 5.5 2.5~7.0 6.0 3.5~7.0 7.0 4.5~7.0 5.0 3.0~7.0 5.0 4.0~7.0 5.0 2.5~7.0 6.0 2.5~7.0 6.0 3.5~7.0 7.0 3.0~7.0 7.0 4.0~7.0 Length (mm) Auto Manual
  • Singer 9100 Professional | Instruction Manual - Page 81
    7.0 4.0~7.0 7.0 2.5~7.0 5.0 2.5~7.0 7.0 3.5~7.0 7.0 4.0~7.0 5.0 3.5~7.0 5.0 3.0~7.0 5.0 2.5~7.0 5.0 2.5~7.0 5.0 2.5~7.0 5.0 3.5~7.0 5.0 3.0~7.0 5.0 2.5~7.0 7.0 2.5~7.0 7.0 2.5~7.0 7.0 2.5~7.0 7.0 3.0~7.0 7.0 3.5~7.0 6.0 4.0~7.0 6.0 2.5~7.0 7.0 2.5~7.0 7.0 3.0~7.0 7.0 2.5~7.0 Length (mm) Auto Manual
  • Singer 9100 Professional | Instruction Manual - Page 82
    7.0 3.5~7.0 7.0 2.5~7.0 7.0 4.5~7.0 7.0 4.5~7.0 7.0 4.0~7.0 7.0 3.0~7.0 7.0 3.0~7.0 7.0 3.5~7.0 7.0 3.5~7.0 7.0 3.5~7.0 7.0 4.5~7.0 7.0 3.5~7.0 7.0 3.5~7.0 7.0 2.5~7.0 5.0 3.5~7.0 7.0 2.5~7.0 7.0 3.5~7.0 6.0 4.5~7.0 7.0 4.0~7.0 7.0 2.5~7.0 7.0 3.5~7.0 7.0 5.0~7.0 7.0 4.5~7.0 Length (mm) Auto Manual
  • Singer 9100 Professional | Instruction Manual - Page 83
    98 99 Width (mm) Auto Manual 7.0 4.0~7.0 7.0 3.5~7.0 7.0 3.0~7.0 7.0 3.5~7.0 6.0 2.5~7.0 6.0 2.5~7.0 6.0 4.0~7.0 6.0 2.5~7.0 5.5 3.5~7.0 6.0 4.5~7.0 6.0 3.5~7.0 7.0 5.0~7.0 6.0 5.0~7.0 5.0 2.5~7.0 5.0 2.5~7.0 5.0 4.5~7.0 7.0 2.5~7.0 5.0 3.5~7.0 5.0 3.5~7.0 6.0 3.5~7.0 5.0 3.0~7.0 Length (mm) Auto
  • Singer 9100 Professional | Instruction Manual - Page 84
    Please note that on disposal, this product must be safely recycled in accordance with relevant National legislation relating to electrical/electronic products. If in doubt please contact your retailer for guidance. 021H5A01XX(EN)
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
Model 9100 Instruction Manual