Singer 9970 Instruction Manual - Page 11

Extra Wide Table - sewing and embroidery

Get Singer 9970 PDF manuals and user guides View all Singer 9970 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

F. THREAD CUTTER BUTTON Press this button after sewing to cut the upper and bobbin threads. The machine will cut both threads automatically. CAUTION 1. Do not press this button when there is no fabric in the machine or no need to cut the threads. The thread may tangle, resulting in damage. 2. Do not use this button when cutting thread thicker than #30, nylon thread or other speciality threads. In this case, use the thread cutter (H). G.DROP FEED LEVER The feed dogs project up through the needle plate, directly below the presser foot. Their function is to move the fabric being sewn. The drop feed lever controls the feed dogs. For ordinary sewing, move the lever to the right. This raises feed dogs to their highest position. For most sewing, the lever should be in this position. For darning or free motion embroidery or whenever fabric is to be moved by hand, move the lever to the left to lower the feed dogs. H.THREAD CUTTER Use this cutter if the thread cutter button is not used. 1. Raise the presser foot and bring fabric and threads backward after sewing. 2. Hook the threads to the thread cutter from back to front. 3. Pull fabric and cut threads. I. TOP COVER To open the top cover, lift up the right side of cover. J. HAND WHEEL By turning the hand wheel, the needle will raise or lower. You should always turn hand wheel toward you. EXTRA WIDE TABLE If you need wide sewing space, attach the extra wide table as shown. Set the machine and extra wide table on a stable table. 1. Remove the extension table (See Page 7) 2. Stand up the two legs of extra wide table. 3. Insert wide table to the machine sliding to the right. 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
11
F. THREAD CUTTER BUTTON
Press this button after sewing to cut the upper and
bobbin threads.
The machine will cut both threads automatically.
CAUTION
1.
Do not press this button when there is no fabric
in the machine or no need to cut the threads.
The thread may tangle, resulting in damage.
2.
Do not use this button when cutting thread
thicker than #30, nylon thread or other
speciality threads.
In this case, use the thread cutter (H).
G.DROP FEED LEVER
The feed dogs project up through the needle plate,
directly below the presser foot. Their function is to
move the fabric being sewn. The drop feed lever
controls the feed dogs.
For ordinary sewing, move the lever to the right.
This raises feed dogs to their highest position. For
most sewing, the lever should be in this position.
For darning or free motion embroidery or
whenever fabric is to be moved by hand, move the
lever to the left to lower the feed dogs.
H.THREAD CUTTER
Use this cutter if the thread cutter button is not
used.
1.
Raise the presser foot and bring fabric and
threads backward after sewing.
2.
Hook the threads to the thread cutter from back
to front.
3.
Pull fabric and cut threads.
I.
TOP COVER
To open the top cover, lift up the right side
of
cover.
J. HAND WHEEL
By turning the hand wheel, the needle will raise or
lower. You should always turn hand wheel toward
you.
EXTRA WIDE TABLE
If you need wide sewing space, attach the extra
wide table as shown.
Set the machine and extra wide table on a stable
table.
1.
Remove the extension table (See Page 7)
2.
Stand up the two legs of extra wide table.
3.
Insert wide table to the machine sliding to the
right.