Singer 9970 Instruction Manual - Page 38
Automatic Bar-tack, And Darning
View all Singer 9970 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
AUTOMATIC BAR-TACK AND DARNING You can sew automatic bar-tack and darning using the buttonhole foot. No. 102 Bar-tack, to reinforce areas that will be subject to strain, such as pocket corners. No.103 Darning, mending and other applications. Buttonhole Foot (F) 1. Adjust slide on base according to the length of bar-tack or darning. a= Length of bar-tack or darning 2. Pass upper thread through the hole of buttonhole foot and bring upper and bobbin threads to the left. 3. Position fabric under presser foot so that the starting point is on the thick area. Lower the foot. b. Sewing bar-tack on edge of thick fabric such as pocket, place same thickness fabric or cardboard beside the fabric. 4. Lower the buttonhole lever completely. Note: Machine will not start to sew if buttonhole lever is not lowered properly or buttonhole foot is not positioned correctly. 5. Hold upper thread lightly and start the machine. 6. Machine will sew bar-tack or darning stitch as shown. Machine will stop automatically when the pattern is finished. 7. Press the thread cutter button and raise the presser foot lifter to remove the fabric. 1 2 3 4 1 2 38