Singer 9970 Instruction Manual - Page 41
Using The Even-feed, Continuous, Decorative Pattern
View all Singer 9970 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
CONTINUOUS DECORATIVE PATTERN Use the Satin Foot for continuous decorative stitch patterns. This foot has a full indentation on the underside to easily allow closely spaced zigzag stitches and fabric to feed freely under foot. No. 19-100 Satin Foot (B) To customize the continuous decorative stitch pattern, you may adjust the length and width of pattern. Experiment with fabric scraps until you get the desired length and width. A. SEWING LIGHTWEIGHT FABRICS When sewing lightweight fabrics, it is suggested that you use stabilizer on the backside of the fabric. USING THE EVEN-FEED FOOT The Even-feed Foot accessory equalizes the feeding of the upper and lower layers of fabric and improves the matching of plaids, stripes, and patterns. This foot helps to prevent uneven feeding of very difficult fabrics. Use this foot also for sewing quilts. No. 1, 2, or 9 Even-feed Foot A. ATTACHING THE EVEN-FEED FOOT 1. Remove the presser foot and holder. (See page 7) 2. The arm of even-feed foot should rest on the shaft of the needle clamp screw. 3. Slide the attaching head from your left to right so that it is fitted into the presser bar. 4. Tighten the presser foot thumb screw. B. SEWING Hold both thread lightly at start of sewing and sew in slow (1/2) speed. 41