Snapper RE110 Operater's Manual - Page 15

Operation Stopping - Engine, Wheel Drive, Blade (Continued) Park Brake 1. To set the park brake, press the clutch/brake pedal (A, Figure 16) all the way down, slide the park brake latch (B) all the way in to the engaged position, and release the clutch/brake pedal. A detent in the park brake latch will keep the park brake engaged. ! WARNING ! DO NOT park the machine on slopes. Cutting Height Adjustment 1. Adjust the cutting height by raising or lowering the deck lift lever (A, Figure 18) into the desired height of cut notch (B). A t for tion B o uc Figure 16: Setting the park brake N d 2. Release the park brake by pressing down firmly on the clutch/brake pedal (A, Figure 17). The park brake latch o (B) is spring-loaded, and will slide back to the disenr gaged position unassisted. A Figure 18: Cutting height adjustment RepA B B Figure 17: Releasing the park brake 15