Sony A2780 Operating Instructions

Sony A2780 - SPP Cordless Phone Manual

Get Sony A2780 - SPP Cordless Phone PDF manuals and user guides
UPC - 027242585263
View all Sony A2780 manuals
Add to My Manuals
Save this manual to your list of manuals

Sony A2780 manual content summary:

  • Sony A2780 | Operating Instructions - Page 1
    3-232-153-11 (1) Cordless Telephone with Answering System Operating Instructions US Hearing-Aid Compatible SPP-A2780 ©2001 Sony Corporation
  • Sony A2780 | Operating Instructions - Page 2
    your Sony dealer regarding this product. Model No. SPP-A2780 Serial No 2US Caution You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Privacy of communications may not be ensured when using this phone. Note
  • Sony A2780 | Operating Instructions - Page 3
    the operation of the equipment. If this happens the telephone company will provide advance notice so you can make the necessary modifications to maintain uninterrupted service. 7. If trouble is experienced with this equipment (SPP-A2780), for repair or warranty information, please contact Sony
  • Sony A2780 | Operating Instructions - Page 4
    . 4. Utilice solamente el cable de alimentación y las pilas indicados en este manual. No tire las pilas al fuego. Podrían explotar. Compruebe los códigos cumple los límites para un aparato digital Clase B de conformidad con la Parte 15 de las Reglas FCC. Dichos límites están diseñados para brindar
  • Sony A2780 | Operating Instructions - Page 5
    FCC 1. Este equipo cumple con la Parte 15 y la Parte 68 de las reglas de la FCC para EE.UU. En la base de este equipo hay una etiqueta que con este equipo (SPP-A2780), con respecto a la reparación o a la información sobre la garantía, póngase en contacto con Sony Direct Response Center: Tel
  • Sony A2780 | Operating Instructions - Page 6
    Setting up the EZ Access function 25 Registering additional cordless handsets 27 Changing the language of the display 28 Identifying the parts Basics 32 Making calls 32 Making calls with the cordless handset 35 Making call with the base phone 37 Redialing 39 Receiving calls 39 Receiving
  • Sony A2780 | Operating Instructions - Page 7
    the number of digits of the phone number 85 Using "Caller ID with call waiting" service Additional Information 86 Mounting the base phone on a wall 87 Carrying the cordless handset by the belt clip 88 Notes on power sources 89 Maintenance 90 Troubleshooting 95 Specifications 96 Index Back cover
  • Sony A2780 | Operating Instructions - Page 8
    - talkie feature, it is necessary to purchase the SPP-H273 Sony cordless handset used for the QuadraStation 2.4 exclusively. • Be sure to register the additional cordless handset(s) to the base phone before use. (See "Registering additional cordless handsets" on page 25.) • Some procedures may vary
  • Sony A2780 | Operating Instructions - Page 9
    location for the base phone. Base phone Step 3 (pages 14 to 15) Insert the battery pack into the cordless handset and charge it for more than 12 hours. Step 4 (page 16) Choose an appropriate dialing mode. Step 5 (pages 17 to 20) Enter the area code to use the Caller ID service. Step 6 (pages 21
  • Sony A2780 | Operating Instructions - Page 10
    contact your local Sony dealer. AC power adaptor for the base phone (AC-T46) Base phone Cordless handset Charger/AC power adaptor for the charger (AC-T127) Handset Handset cord Telephone line cords (2) 10US Getting Started Wall bracket/ stand for base phone Rechargeable battery pack (BP-T38
  • Sony A2780 | Operating Instructions - Page 11
    loss of audio during a conversation, try moving closer to the base or move base phone away from other noise sources. • The cordless telephone operates at a frequency that may cause interference to nearby TVs, VCRs, and microwave oven; the base phone should not be placed near or on the top of a TV
  • Sony A2780 | Operating Instructions - Page 12
    , attach the supplied wall bracket on the bottom of the base phone. Align the f marks. 2 1 1 Connect the handset cord to the HANDSET jack and to the handset. 2 Connect the telephone line cord to the LINE jack and to a telephone outlet. 3 Connect the AC power adaptor to the DC IN 9V jack and
  • Sony A2780 | Operating Instructions - Page 13
    power adaptor to a continuous power supply. • Place the base phone close to the AC outlet so that you can unplug the AC power adaptor easily. Polarity of the plug Tip If your telephone outlet is not modular, contact your telephone service company for assistance. Modular Getting Started Getting
  • Sony A2780 | Operating Instructions - Page 14
    goes on upper side). Hook 3 Hook the cords and insert the battery pack. Then close the lid. 4 Connect the AC power adaptor to the DC IN 9V jack of the charger and to an AC outlet and To an AC outlet place the cordless handset on the charger. Front side To DC IN 9V CHARGE lamp
  • Sony A2780 | Operating Instructions - Page 15
    with the base phone) is set to 1 at the factory. The station number of the cordless handset newly added to the system will be one of the number 2 through 4 in the order of registration. (See "Registering additional cordless handsets" on page 25.) HANDSET 1 NEW OLD MASSAGE RING OFF Battery duration
  • Sony A2780 | Operating Instructions - Page 16
    telephone to work properly, select an appropriate dialing mode (tone or pulse). You can select the dialing mode on both the base phone and cordless handset. The dialing mode that has been last set either with the base phone or cordless handset during the operation procedure. 16US Getting Started
  • Sony A2780 | Operating Instructions - Page 17
    register up to 5 local area codes with this telephone to take advantage of this system. See "To enter the local area code (For 10 digits phone number users For 10 digits phone number users)" on page 19. Entering the area code is only possible on the cordless handset. Make sure the base phone* is not
  • Sony A2780 | Operating Instructions - Page 18
    not allow more than 60 seconds to elapse during the operation procedure. • If the area code has not been entered, ERROR" will appear on the display and five short error beeps will be heard after (PGM) is pressed in step 5. Move the cordless handset closer to the base phone, make sure the base phone
  • Sony A2780 | Operating Instructions - Page 19
    to elapse during the operation procedure. • If the local area code is not correctly entered, "ERROR" will appear on the display and five short error beeps will be heard after (PGM) is pressed in step 5. Move the cordless handset closer to the base phone, make sure the base phone* is not in use
  • Sony A2780 | Operating Instructions - Page 20
    Step 5: Entering the area code (continued) To change the local area code 1 Perform steps 1 to 3 on page 19. The current local area code appears on the display. 2 Press (ERASE) to erase the current local area code. 3 Enter a new local area code using the dialing keys. 4 Press (PGM). You hear a long
  • Sony A2780 | Operating Instructions - Page 21
    time when you play back messages. You can set the day and time only with the cordless handset. Make sure the base phone* is not in use before you start the setting. * If the system includes additional cordless handsets, it is necessary to stop using them before you start the setting as well. 1 Press
  • Sony A2780 | Operating Instructions - Page 22
    hear a time stamp when you play back recorded messages. • When "ERROR" appears on the display and five short error beeps are heard after Jog Dial is pressed in step 8, move the cordless handset closer to the base phone, make sure the base phone* is not in use before you start the setting. * If the
  • Sony A2780 | Operating Instructions - Page 23
    for dialing the access number of your special services e.g. long distance provider. Also, you can set up just a phone number with the function for onetouch dialing. You can set up the EZ Access function on both the base phone and the cordless handset, further more, you can assign a different access
  • Sony A2780 | Operating Instructions - Page 24
    page 33, 35. -for redialing, see page 37. -for making calls from the Phone Directory, see page 47. -for making calls from Caller ID list, see page 80. using the dialing keys. 4 Press (PGM). (Press (PROGRAM) on the base phone.) You hear a long confirmation beep. To store a number to be dialed
  • Sony A2780 | Operating Instructions - Page 25
    of four cordless handsets. Be sure to register the ID number of the additional cordless handset called "station number" to the base phone before using the additional cordless handset. The station number of the base phone is set to 0 and that of the cordless handset (supplied with the base phone) is
  • Sony A2780 | Operating Instructions - Page 26
    the operation procedure. • Once you add a cordless handset to the base phone system, you cannot change the station numbers, or cancel the additional registrations. • When you press any button other than (PGM) to use an unregistered cordless handset, the message "PLEASE REGISTER THIS HANDSET" will
  • Sony A2780 | Operating Instructions - Page 27
    the base phone and the cordless handset, further more, you can select the display language on each unit (base phone and cordless handset). to elapse during the operation procedure. To change the language from Spanish to English 1 Press (PGM). (Press (PROGRAM) on the base phone.) 2 Turn Jog Dial
  • Sony A2780 | Operating Instructions - Page 28
    Identifying the parts Refer to the pages indicated in parentheses for details. Base phone 1 qf 2 qg is on, and flashes when a new message is recorded. 5 Handset (p. 12, 35, 41) 6 > SKIP button (p. 69) Speaker 9 REVIEW button (p. 69) Keep the button pressed for a playback review of the current
  • Sony A2780 | Operating Instructions - Page 29
    the base phone and cordless handset. wd HOLD button (p. 36) Puts a call on hold. wf SPEAKERPHONE button (p. 35) Lets you make or receive a call. wg MIC (microphone) (p. 60, 73) wh Antenna (p. 12, 86) wj Hook for AC power adaptor cord (p. 12, 86) wk DC IN 9V jack (p. 12, 86) wl LINE (telephone line
  • Sony A2780 | Operating Instructions - Page 30
    (p. 23, 33) Lets you make a call with the registered access number. 9 Jog Dial (p. 17, 43, 77) 0 OFF button (p. 32, 40) Allows you to disconnect the call. qa INTERCOM button (p. 54, 56) Lets you talk between the base phone and the cordless handset. qs Dialing keys (p. 32) qd ERASE button (p. 18
  • Sony A2780 | Operating Instructions - Page 31
    dialing. qh RINGER qj I (HEADSET) jack (p. 33, 39, 87) qk VOL (volume) switch (p. 33) Adjust the cordless handset volume. ql SKIP > button (p. 69) Press to skip to the next message. w; # button (p. 83) Used to change the number of digits of the phone
  • Sony A2780 | Operating Instructions - Page 32
    number "1" is in use. If you hear five short error beeps and "NO CONNECTION" appears on the display, move closer to the base phone. 3 Dial the phone number. 4 When you're done talking, press (OFF) or replace the cordless handset on the charger. The display turns off. To make a call after checking
  • Sony A2780 | Operating Instructions - Page 33
    ) jack on the cordless handset, you can talk through the headset. Open Basics Making calls using the EZ Access function To set up the access number, see "Setting up the EZ Access function" on page 23. 1 Pick up the cordless handset from the charger. 2 Dial the phone number (e.g., 1-201-123-4567
  • Sony A2780 | Operating Instructions - Page 34
    outside caller via the base phone, you cannot make a call with the cordless handset. If you press (TALK), "NO CONNECTION" appears on the display and you will hear five short error beeps. • When the talk time exceeds 9:59:59, the display counts from 0:00:00 again. If the battery becomes weak during
  • Sony A2780 | Operating Instructions - Page 35
    Making calls with the base phone 1 Pick up the handset or press (SPEAKERPHONE) on the base phone. (REDIAL/PAUSE) (PROGRAM) (CALL WAITING/ , minutes and seconds. 2 Dial the phone number. (ERASE) 3 When you're done talking, replace the handset in the cradle or press (SPEAKERPHONE) again. (*TONE)
  • Sony A2780 | Operating Instructions - Page 36
    to the first caller. * You need to subscribe to the service from your telephone company. Notes • While talking with an outside caller via the cordless handset, the display on the base phone shows "HANDSET 1 IN USE" when the cordless handset with the station number "1" is in use, and you cannot
  • Sony A2780 | Operating Instructions - Page 37
    base phone and the cordless handset can each individually store five dialed phone numbers. Turn Press 1 Press (REDIAL/PAUSE). 2 Display the name or phone ", and then press Jog Dial. The phone number will be redialed. Notes • The redial memory only registers up to 32 digits. Exceeding numbers will
  • Sony A2780 | Operating Instructions - Page 38
    ", and then press Jog Dial. You hear a long confirmation beep, and the number is erased. To erase the entire dialed phone numbers at once 1 Press (PGM). (Press (PROGRAM) on the base phone.) 2 Turn Jog Dial to choose "MEMORY MANAGE", and then press Jog Dial. 3 Turn Jog Dial to choose "ERASE ALL RDL
  • Sony A2780 | Operating Instructions - Page 39
    on the display of the base phone when the cordless handset with the station number "1" is in use. 2 When you're done talking, press (OFF) or replace the cordless handset on the charger. The display turns off. Receiving calls when the headset is connected When a headset (optional) is connected to
  • Sony A2780 | Operating Instructions - Page 40
    service from your telephone company. Tip To inform you of an incoming call, the display shows "** RINGING **" even when you set the ringer volume on the cordless handset service. • the name stored in the Phone Directory appears on the display if the call matches the number stored in the Phone
  • Sony A2780 | Operating Instructions - Page 41
    on hold Press (HOLD). "HOLD" appears on the display. Press (HOLD), (SPEAKERPHONE), or pick up the handset from the base phone to resume the conversation. Switch to another call ("call waiting" service*) Press (CALL WAITING/ FLASH). Press (CALL WAITING/ FLASH) again to return to the first caller
  • Sony A2780 | Operating Instructions - Page 42
    Receiving calls (continued) Note Even when you set the ringer volume on the base phone to off, the cordless handset will ring when the ringer volume on the cordless handset is set to high or low. Tips • To inform you of an incoming call, the display shows "** RINGING **" even when you set the ringer
  • Sony A2780 | Operating Instructions - Page 43
    Telephone Features Telephone Features Phone Directory You can dial a number by scrolling through the Phone Directory. Both the base phone and the cordless handset can each store up to 50 separate numbers. Storing phone numbers and names Example: to store "SONY" "1234567". Turn Press 1 Press (
  • Sony A2780 | Operating Instructions - Page 44
    has been entered, the phone number appears in two lines. SONY 1234567_ NEW OLD MASSAGE RING OFF SONY 1234567890123456 78_ NEW OLD MASSAGE RING OFF 6 Press (PGM) (or (PROGRAM)). You hear a long confirmation beep, and the name and the number are stored. The display goes off. 44US Telephone Features
  • Sony A2780 | Operating Instructions - Page 45
    Telephone Features Notes • If you try to save a 51st phone number, you will hear five short error beeps and "THE MEMORY IS FULL" will be displayed. You cannot store the phone number. To store another phone number, erase one of the stored phone numbers (see page 49). • Names cannot be entered using
  • Sony A2780 | Operating Instructions - Page 46
    (continued) Making calls from the Phone Directory Turn Press 1 Press Jog Dial. "PHONE DIRECTORY" appears on the display. PHONE DIRECTORY ABC DEF NEW OLD MASSAGE TUV WXYZ etc NEW OLD MASSAGE RING OFF BROWN JOHN SONY SMITH JOHN NEW OLD MASSAGE RING OFF 4 Press Jog Dial. (GO BACK) DIAL
  • Sony A2780 | Operating Instructions - Page 47
    displayed. • You may press (TALK) on the cordless handset (on the base phone, pick up the handset or press (SPEAKERPHONE)) to make a call instead of phone number and make a call by pressing (EZ ACCESS) after step 3. For setting up the EZ access function, see page 23. continued Telephone Features 47US
  • Sony A2780 | Operating Instructions - Page 48
    the new name. If you want to change only the number, skip this step. 5 Press (PGM). (Press (PROGRAM) on the base phone.) The cursor is at the right of the phone number. SONY 1234567_ NEW OLD MASSAGE RING OFF 6 Press (ERASE) to erase the number, and enter the new number. If you don't want
  • Sony A2780 | Operating Instructions - Page 49
    Erasing a memory location To erase the phone number one by one 1 Display the name you want to erase by doing steps 1 to 3 on page 46. 2 Press Jog Dial. BROWN JOHN SONY SMITH JOHN NEW OLD MASSAGE RING OFF (GO BACK) DIAL EDIT NEW OLD MASSAGE RING OFF Telephone Features 3 Turn Jog Dial to choose
  • Sony A2780 | Operating Instructions - Page 50
    one by one or all at once (with a maximum of 50 numbers) from a cordless handset to the base phone or to an additional cordless handset, or from a base phone to one of the cordless handsets. Make sure the base phone* is not in use before you start the setting. * If the system includes additional
  • Sony A2780 | Operating Instructions - Page 51
    , "ERROR" will appear on the display, and five short error beeps will be heard. Move the sending unit closer to the receiving unit, make sure the receiving unit is not in use, and then start over the procedure. • To check the station number assigned to the cordless handset, see page 26. Telephone
  • Sony A2780 | Operating Instructions - Page 52
    handset and the base phone, or between the cordless handsets without disconnecting the call. Switching from the base phone to the cordless handset 1 Press (HOLD) on the base phone. The call is on hold and "HOLD" appears on the display. (SPEAKERPHONE) 2 Pick up the cordless handset from the charger
  • Sony A2780 | Operating Instructions - Page 53
    Telephone Features Switching from the cordless handset to another cordless handset (When the system has an additional cordless handset) 1 Press (HOLD) on the cordless handset. The call is on hold and "HOLD" appears on the display. 2 Pick up another cordless handset from the charger (When Quick talk
  • Sony A2780 | Operating Instructions - Page 54
    press (INTERCOM) on the cordless handset, "NO CONNECTION" appears on the display and you will hear five short error beeps. Tip You can receive an intercom call on the base phone even when the ringer volume on the base phone is set to off. The phone will ring at a low level. 54US Intercom Operation
  • Sony A2780 | Operating Instructions - Page 55
    cordless handset picks up the cordless handset from the charger (When Quick talk is set to "ON"; see page 40), or presses (TALK) or (INTERCOM), you can talk with each other. 4 When you are done talking, replace the handset in the cradle or press (SPEAKERPHONE) on the base phone. Intercom Operation
  • Sony A2780 | Operating Instructions - Page 56
    - Walkie-Talkie function (When the system has an additional cordless handset) You can make an intercom conversation between a couple of cordless handsets (Walkie-Talkie function) of the same phone system far from the base phone (e.g. use out of doors). Example: Making intercom call from station
  • Sony A2780 | Operating Instructions - Page 57
    the display of the base phone. 4 Pick up the handset from the base phone, or press (SPEAKERPHONE) or (INTERCOM) on the base phone. You can talk between the cordless handset and the base phone. 5 To talk to the caller with the base phone, replace the cordless handset on the charger or press (OFF
  • Sony A2780 | Operating Instructions - Page 58
    cordless handset from the charger (When Quick talk is set to "ON"; see page 40), or press (TALK) or (INTERCOM) on the (INTERCOM) cordless handset. You can talk between the base phone and the cordless handset. 5 To talk to the caller with the cordless handset, replace the handset in the cradle
  • Sony A2780 | Operating Instructions - Page 59
    40), or press (TALK) or (INTERCOM) on the cordless handset. You can talk with each other. 4 To talk to the caller with the cordless handset whose station number is 2, replace the cordless handset on the charger or press (OFF) on the cordless handset whose station number is 1. "TALK" appears on the
  • Sony A2780 | Operating Instructions - Page 60
    decide to change the mode, make sure that you record a new greeting to match the answering mode. Greeting recording is only available on the base phone. 1 Press (PROGRAM). 2 Turn Jog Dial to choose "GREETING", and then press Jog Dial. MIC (Microphone) (GO BACK) PLAY BACK RECORD NEW OLD MASSAGE
  • Sony A2780 | Operating Instructions - Page 61
    than 60 seconds to elapse during the operation procedure. • If recording did not succeed, you hear five short error beeps. Start over the procedure. • recording stops automatically. • To record the greeting from a touch-tone phone, see page 75. Prerecorded greeting Normal mode: "Hello, I'm unable
  • Sony A2780 | Operating Instructions - Page 62
    ring time is preset to "TOLL SAVER". You can set the ring time only with the cordless handset. Make sure the base phone* is not in use before you start the setting. * If the system includes additional cordless handsets, it is necessary to stop using them before you start the setting as well. Turn
  • Sony A2780 | Operating Instructions - Page 63
    not allow more than 60 seconds to elapse during the operation procedure. • When "ERROR" appears on the display and five short error beeps are heard after Jog Dial is pressed in step 4, move the cordless handset closer to the base phone, make sure the base phone is not in use, and then start over the
  • Sony A2780 | Operating Instructions - Page 64
    not allow more than 60 seconds to elapse during the operation procedure. • The approx. length of the three recording ERROR" appears on the display and five short error beeps are heard after Jog Dial is pressed in step 4, move the cordless handset closer to the base phone, make sure the base phone
  • Sony A2780 | Operating Instructions - Page 65
    not allow more than 60 seconds to elapse during the operation procedure. • The same greeting is used regardless of the ERROR" appears on the display and five short error beeps are heard after Jog Dial is pressed in step 4, move the cordless handset closer to the base phone, make sure the base phone
  • Sony A2780 | Operating Instructions - Page 66
    press Jog Dial. You hear a long confirmation beep. Note When "ERROR" appears on the display and five short error beeps are heard after Jog Dial is pressed in step 4, move the cordless handset closer to the base phone, make sure the base phone is not in use, and then start over the procedure. 66US
  • Sony A2780 | Operating Instructions - Page 67
    in red. Notes • When the memory is full, you hear five short error beeps and you cannot turn on the answering function. Erase unnecessary messages (see • You can also turn on or off the answering function from an outside phone (see page 75). To turn off the answering function Press (ANSWER ON/OFF
  • Sony A2780 | Operating Instructions - Page 68
    MESSAGE PLAY/STOP) (VOL +) (4) REVIEW (VOL -) (PROGRAM) (ERASE) Jog Dial When you come home If (ANSWER ON/OFF) flashes in red and display on the base phone shows the number of new messages, press (MESSAGE PLAY/STOP) on the base phone or (HOLD/PLAY) on the cordless handset. The machine plays back
  • Sony A2780 | Operating Instructions - Page 69
    7 steps for the answering volume level. Adjust the cordless handset Set the VOL switch on the cordless handset to volume H (high), M (middle) or L (low). Stop playback Press (MESSAGE PLAY/STOP) on the base phone or (OFF) on the cordless handset. Skip to the next message Press (3) > SKIP while
  • Sony A2780 | Operating Instructions - Page 70
    and then press Jog Dial. 3 Turn Jog Dial to choose "REC. CAPACITY", and then press Jog Dial. 4 Press (OFF) on the cordless handset or (MESSAGE PLAY/STOP) on the base phone to return to the standby mode display. RECORDING MEMORY CAPACITY E F NEW OLD MASSAGE RING OFF Note When the memory is full
  • Sony A2780 | Operating Instructions - Page 71
    . You hear a voice guidance and the message is erased. To erase the entire messages at once Entire message deletion can only be made on the base phone. Note that new messages that have not as yet been played back will also be erased. 1 Press (PROGRAM). 2 Turn Jog Dial to choose "MEMORY MANAGE
  • Sony A2780 | Operating Instructions - Page 72
    the answering function on (see page 67) while you are at home. When a call is answered, you can hear the message being recorded through the base phone or cordless handset but the caller cannot hear you. Then, you can decide whether to answer the call or not. This function is available both the
  • Sony A2780 | Operating Instructions - Page 73
    incoming messages (see page 68). Memo recording is only available on the base phone. MIC (Microphone) 1 Press (MEMO REC). You hear a voice guidance (available time for recording is displayed as running short), you hear five short error beeps and you cannot record a memo. • If a call comes in while
  • Sony A2780 | Operating Instructions - Page 74
    phone. First, you just set the remote ID code (security code) and turn on the answering function before going out. The remote ID code (security code) setting can only be made on the cordless handset allow more than 60 seconds to elapse during the operation procedure. Tip When you select "(GO BACK)",
  • Sony A2780 | Operating Instructions - Page 75
    code (security code). You hear a long confirmation beep. Following the voice guidance informing you of the number of messages recorded, the phone stands by for you to enter a control code. 3 To do other operations, enter the control code within 20 seconds (see the table below). To quit, hang up the
  • Sony A2780 | Operating Instructions - Page 76
    service. The name of this service may vary depending on your telephone company. To use this feature, be sure to enter the area code (see page 17). When you receive a call The phone call from a phone number which is stored in the Phone Directory on the base phone or the cordless handset (see page 43
  • Sony A2780 | Operating Instructions - Page 77
    received; even if they were not answered. Viewing the Caller ID list You can look through the Caller ID list on both the base phone and the cordless handset to check the phone number and/or name of the calls received. Turn Press 1 Turn Jog Dial. The display shows the number of "NEW CALL" (calls
  • Sony A2780 | Operating Instructions - Page 78
    you can also manually erase unnecessary data one by one or erase the entire list. To erase the phone number one by one 1 Display the phone number you want Do not allow more than 60 seconds to elapse during the operation procedure. Tip When you select "(GO BACK)", you can return to the
  • Sony A2780 | Operating Instructions - Page 79
    not allow more than 60 seconds to elapse during the operation procedure. • When "ERROR" appears on the display and five short error beeps are heard after Jog Dial is pressed in step 4, move the cordless handset closer to the base phone, make sure the base phone is not in use, and then start over the
  • Sony A2780 | Operating Instructions - Page 80
    ). • Do not allow more than 60 seconds to elapse during the operation procedure. • If the number displayed in step 1 is not the one is necessary. Tips • You may press (TALK) on the cordless handset (on the base phone, pick up the handset or press (SPEAKERPHONE)) to make a call instead of doing steps
  • Sony A2780 | Operating Instructions - Page 81
    seconds to elapse during the operation procedure. Tips • When you select "(GO BACK)", you can return to the previous set display by pressing Jog Dial. • Messages can be played back by pressing (MESSAGE PLAY/STOP) on the base phone or (HOLD/PLAY) on the cordless handset in step 1. continued Caller ID
  • Sony A2780 | Operating Instructions - Page 82
    RING OFF SMITH JOHN_ ABCDEFGHIJKLMN OPQRSTUVWXYZ NEW OLD MASSAGE RING OFF 4 Press (PGM). (Press (PROGRAM) on the base phone.) The cursor is at the right of the phone number. Enter or change the phone number, if necessary (see page 48). SMITH JOHN 12011234567_ NEW OLD MASSAGE RING OFF 5 Press (PGM
  • Sony A2780 | Operating Instructions - Page 83
    CODE" will appear on the display, and you will not be able to store into the Phone Directory. Enter the area code (see page 17). • Do not allow more than 60 seconds to elapse during the operation procedure. • If the number displayed in step 1 is not the one you should store, you
  • Sony A2780 | Operating Instructions - Page 84
    01 7.04 4:53PM NEW OLD MASSAGE RING OFF SMITH JOHN 123-4567 01 7.04 4:53PM NEW OLD MASSAGE RING OFF 2 Continue the operation to call or store the phone number with the correct number of digits (pages 80 and 82). Notes • You need to adjust the number of digits each time you
  • Sony A2780 | Operating Instructions - Page 85
    is compatible with the "Caller ID with call waiting" service. Make sure that your telephone company offers this service. Like the basic Caller ID service, you need to subscribe to "Caller ID with call waiting" in order to use this service. Even though you may have already subscribed to "Caller
  • Sony A2780 | Operating Instructions - Page 86
    for mounting. 3 Attach the wall bracket to the center of the base phone. Align the f marks of the wall bracket with those of the base phone. Telephone line cord 4 Plug the telephone line cord to the telephone outlet, and hook the base phone to the wall plate. 5 Plug the AC power adaptor to an
  • Sony A2780 | Operating Instructions - Page 87
    clip of the cordless handset by pressing the top of it, and then attach the cordless handset to the belt. Using the headset You can talk on the cordless handset without using your hands by connecting a headset (optional) to the I (HEADSET) jack on the cordless handset. I (HEADSET) jack Additional
  • Sony A2780 | Operating Instructions - Page 88
    • If you do not use the cordless handset for a long period of time, remove the battery pack after charging for more than 12 batteries in household or business trash may be prohibited. RBRC (Rechargeable Battery Recycling Corporation) advises you about spent battery collection by the following phone
  • Sony A2780 | Operating Instructions - Page 89
    they may damage the finish of the cabinet. • If the charge terminals of the charger and cordless handset are soiled, wipe them with a soft cloth. If you have any questions or problems concerning your phone, please consult your nearest Sony dealer. Additional Information 89US Additional Information
  • Sony A2780 | Operating Instructions - Page 90
    your phone, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer. General Making calls Symptom Remedy The base phone does not operate properly. • Make sure the AC-T46 Sony AC power adaptor is connected to the base phone and
  • Sony A2780 | Operating Instructions - Page 91
    BATTERY LOW" 12hours(page14). appears on the display. The cordless handset does not ring when you use the intercom from the base phone or an additional cordless handset, and the base phone When pressing (INTERCOM) on the cordless handset, you hear five short error beeps and cannot make an intercom
  • Sony A2780 | Operating Instructions - Page 92
    Troubleshooting (continued) Answering machine Symptom Remedy Youcannothearanythingfrom • During playback, press (VOL +) on the base phone to the speaker. increase the answering volume. No time stamp is heard. • Makesurethedayandtimeareset(page21). • The day and time may have been cleared due
  • Sony A2780 | Operating Instructions - Page 93
    does not work. The CHARGE lamp on the charger does not light up when you place the cordless handset to charge. The battery duration is short. Remedy • Make sure you have subscribed to Caller ID service. • Caller ID service may not work when the phone is connected to a Private Branch Exchange (PBX
  • Sony A2780 | Operating Instructions - Page 94
    Troubleshooting (continued) Note Should any problems persist, press RESET on the bottom of the base phone with the tip of a toothpick or some other sharp instrument. This has no effect on the memory in the base phone and handset. RESET 94US Additional Information
  • Sony A2780 | Operating Instructions - Page 95
    -Spectrum Access method FDMA-TDD Frequency band 2.4075 - 2.4720 GHz Operating channel 40 channels Dial signal Tone, 10 PPS (pulse) selectable Supplied accessories See page 10. Cordless handset Power source Rechargeable battery pack BP-T38 Battery life Standby: Approx. 6 days Talk: Approx. 5 hours
  • Sony A2780 | Operating Instructions - Page 96
    service 33, 40 Caller ID 76 Caller ID list 77 calling back 80 memory match function 76 playing back a message from the Caller ID list 81 storing in Phone Directory 82 Caller ID with call waiting 85 Carrying the cordless handset by the belt clip 87 Connection 12 Control codes for remote operations
  • Sony A2780 | Operating Instructions - Page 97
    a call 52 T Toll-saver feature 62 Talking between the phones 54 Tone dialing dialing mode 16 switching to 33 Transferring a call 57 Troubleshooting 90 U UNKNOWN NUMBER/ NAME/CALLER 76 V Volume answering 69 cordless handset 33, 40 handset 36, 41 ringer 40, 41 speakerphone 36, 41 W, X, Y, Z Walkie
  • Sony A2780 | Operating Instructions - Page 98
    98US Additional Information
  • Sony A2780 | Operating Instructions - Page 99
    Additional Information Additional Information 99US
  • Sony A2780 | Operating Instructions - Page 100
    For the customers in the USA Be sure to save the receipt and attach it to your WARRANTY card when having your equipment repaired at an authorized Sony service center. For online product registration, please contact www.sony.com/productregistration Sony Corporation Printed in Taiwan, R.O.C.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
3-232-153-
11
(1)
©2001 Sony Corporation
Operating Instructions
SPP-A2780
Cordless
Telephone
with Answering System
US
Hearing-Aid Compatible