Sony AITI200ST User Guide

Sony AITI200ST Manual

Get Sony AITI200ST PDF manuals and user guides View all Sony AITI200ST manuals
Add to My Manuals
Save this manual to your list of manuals

Sony AITI200ST manual content summary:

  • Sony AITI200ST | User Guide - Page 1
  • Sony AITI200ST | User Guide - Page 2
  • Sony AITI200ST | User Guide - Page 3
  • Sony AITI200ST | User Guide - Page 4
    conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. • Por medio de la presente la corporación Sony declara que el SDX-870V cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE
  • Sony AITI200ST | User Guide - Page 5
    completely before operating the appliance, and keep this manual for future reference. Carefully observe all warnings, precautions and instructions on the appliance, or the one described in the operating instructions and adhere to them. USE Power Sources - This unit should be operated only
  • Sony AITI200ST | User Guide - Page 6
    operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the unit to normal operation. • When the unit exhibits a distinct change in performance - this indicates a need for service. Servicing - Do
  • Sony AITI200ST | User Guide - Page 7
    -A/AITi100-A/AITi50-A/AITi390-ST/AITi200-ST/AITi100-ST Tape Drive ...8 Introduction ...9 Product Features 9 Precautions ...11 of 3 LEDs 25 Drive Operation 26 Interface Implementation 29 Supported ATA Commands 29 Supported ATAPI Packet Commands 29 Specifications ...30 Product Specifications 30
  • Sony AITI200ST | User Guide - Page 8
    achieves high data reliability through Read-After-Write, an additional level of Error Correction Code, and other features. The Sony AITi200-A/AITi100-A/AITi50-A/AITi390-ST/AITi200-ST/ AITi100-ST drive stores data on tape using a standard format called AIT (Advanced Intelligent Tape) and ALDC formats
  • Sony AITI200ST | User Guide - Page 9
    (with AIT-E Turbo tape) * Assuming a 2.6 : 1 compression ratio. (The compression ratio varies according to the type of data.) AITi200-A/AITi100-A/AITi50-A • Supported Format AITi200-A: AIT-E Turbo, AIT-1, AIT-1 Turbo, AIT-2, and AIT-2 Turbo AITi100-A: AIT-E Turbo, AIT-1, and AIT-1 Turbo AITi50
  • Sony AITI200ST | User Guide - Page 10
    AITi390-ST/AITi200-ST/AITi100-ST • Supported Format AITi390-ST: AIT-2 Turbo, AIT-3, and AIT-3 Ex (read/write) AIT-E Turbo, AIT-1, AIT-1 Turbo, and AIT-2 (read only) AITi200-ST: AIT-E Turbo, AIT-1, AIT-1 Turbo, AIT-2, and AIT-2 Turbo AITi100-ST: AIT-E Turbo, AIT-1, and AIT-1 Turbo • Burst Transfer
  • Sony AITI200ST | User Guide - Page 11
    Precautions Installation Avoid placing the drive in a location subject to: - high humidity - high temperature - mechanical shock and vibration - direct sunlight Operation • Do not move the drive while it is operating. It may cause malfunction. • Avoid exposing the drive to sudden changes from a low
  • Sony AITI200ST | User Guide - Page 12
    Installation Jumper Setting The following figures apply to the AITi100-A and AITi50-A. IDE Interface Connector Jumpers Drive Setting Master Slave Cable Select Master Slave Cable Select No Connection Power Connector 43 21 5V GND GND 12V 12
  • Sony AITI200ST | User Guide - Page 13
    Connectors The following figures apply to the AITi200-ST. SATA Power SATA Signal Connector (*1) Connector Legacy Power Connector (*2) 43 21 5V GND GND 12V Caution DO NOT USE both the SATA Power Connector (*1)
  • Sony AITI200ST | User Guide - Page 14
    Option Switches (DIP Switch) DIP Switch Positions Default DIP Switch 1 Drive Mode (OFF) 2 Drive Mode (OFF) 3 Drive Mode (OFF) 4 Drive Mode (OFF) 5 Reserved (OFF) 6 Periodic Cleaning Req (OFF) 7 DC Control (1) (ON) 8 DC Control (2) (OFF) 14
  • Sony AITI200ST | User Guide - Page 15
    Cleaning Request Mode Periodic cleaning requests can be enabled by a DIP switch. ON OFF 12345678 1 Drive Mode 2 Drive Mode 3 Drive Mode 4 Drive Mode 5 Reserved 6 Periodic Cleaning Req (ON) 7 DC Control (1) 8 DC Control (2) When switch 6 is ON, cleaning requests are enabled. When enabled, the "
  • Sony AITI200ST | User Guide - Page 16
    Mounting Holes The following figures apply to the AITi100-A and AITi50-A. For 3.5" Standard Height 7.6±0.5 mm (0.30±0.02 in) 6-M3 (depth 2.5mm [0.10"] max.) 6-M3 (depth 2.5mm [0.10"] max.) 95.5 mm (3.76 in) 7.4 _+ 0.6mm [0.29"_+ 0.02"] 155.0 _+ 0.5mm [6.10"_+ 0.02"] 60.0_+ 0.3mm [2.36"_+ 0.01"]
  • Sony AITI200ST | User Guide - Page 17
    For 5.25" Half Height 6-M3 9.9+_ 0.5mm [0.39"+_ 0.02"] 21.8+_ 0.5mm [0.86"+_ 0.02"] 79.2+_ 0.3mm [3.12"+_ 0.01"] 7.0mm [0.28"] 41.2+_ 0.5mm [1.62"+_ 0.02"] 7.4 +_ 0.6mm [0.29"+_ 0.02"] 9.8 +_ 0.6 mm [0.39"+_ 0.02"] 31.0+_ 0.3mm [1.22"+_ 0.01"] 47.5 +_0.3mm [1.87"+_ 0.01"] 79.2+_ 0.3mm [3.12
  • Sony AITI200ST | User Guide - Page 18
    The following figures apply to the AITi200-ST. For 3.5" Standard Height 18 4.8 +_0.5mm [0.19"+_ 0.02"] 41.2+_ 0.5mm [1.62"+_ 0.02"] 21.0+_ 0.3mm [0.83"+_ 0.01"] 60.0+_ 0.3mm [2.36"+_ 0.01"] 90.0+_ 0.3mm [3.54"+_ 0.01"] 9.8 +_ 0.6
  • Sony AITI200ST | User Guide - Page 19
    For 5.25" Half Height 6-M3 9.9+_ 0.5mm [0.39"+_ 0.02"] 21.8+_ 0.5mm [0.86"+_ 0.02"] 79.2+_ 0.3mm [3.12"+_ 0.01"] 7.0mm [0.28"] 41.2+_ 0.5mm [1.62"+_ 0.02"] 7.4 +_ 0.6mm [0.29"+_ 0.02"] 9.8 +_ 0.6 mm [0.39"+_ 0.02"] 31.0+_ 0.3mm [1.22"+_ 0.01"] 47.5 +_0.3mm [1.87"+_ 0.01"] 79.2+_ 0.3mm [3.12
  • Sony AITI200ST | User Guide - Page 20
    Reconfiguring from 5.25" Model to 3.5" Model You can reconfigure the 5.25" model to the 3.5" model yourself. 1 Remove the 2 screws for each side rail. 2 Take the side rail off. Side Rail (L) Side Rail (R) 20
  • Sony AITI200ST | User Guide - Page 21
    Orientation 10° 10° 10° 10° 10° 10° 10° 10° 21
  • Sony AITI200ST | User Guide - Page 22
    Attaching and Removing the Dust Cover Attaching the Dust Cover 1 Align the dust cover's hinge clips (one on each side) with the pins of the drive bezel. • The dust cover should be positioned so that the magnets* on the cover's back face the drive bezel. * This magnet does not affect the tape of the
  • Sony AITI200ST | User Guide - Page 23
    2 Press down at an angle on each side in turn until you hear the hinge clips click into place. Caution Do not press the dust cover in horizontally from the front. Doing so could cause the dust cover to break. 3 Close the dust cover. This completes attachment of the dust cover. 23
  • Sony AITI200ST | User Guide - Page 24
    Removing the Dust Cover 1 Open the dust cover. 2 Holding the dust cover at both corners, carefully raise the dust cover. The dust cover hinge clips and drive bezel pins uncouple. Note We recommend that you use the drive with the dust cover. 24
  • Sony AITI200ST | User Guide - Page 25
    Operation Location of 3 LEDs There are three LED indications (TAPE MOTION LED, CLEANING REQUEST LED, REPLACE TAPE LED) and an EJECT button on the front panel of the unit. Front Panel (for 3.5" Standard Height) Advanced Intelligent Tape LED TAPE MOTION CLEANING REQUEST REPLACE TAPE EJECT button
  • Sony AITI200ST | User Guide - Page 26
    the extent, it is automatically set in the drive and the TAPE MOTION LED lights. Unloading a Cartridge The cartridge can be removed from the AITi200-A, AITi100-A, and AITi50-A either in response to a ATAPI Unload Command, or by pressing the EJECT bottom. By pressing EJECT button, the tape is rewound
  • Sony AITI200ST | User Guide - Page 27
    logo. When the head needs cleaning, the CLEANING REQUEST indicator lights. Use the cleaning cartridge made exclusively for each model. AITi390-ST AITi200-A, AITi200-ST, AITi100-A, AITi100-ST, AITi50-A Cleaning cartridge to use SDX3X-CL SDX1-CL How to Clean 1 Load the head cleaning cartridge into
  • Sony AITI200ST | User Guide - Page 28
    Storage Precautions • Keep cartridges in their cases when not in the drives. • Avoid storing cartridges in dusty locations, in direct sunlight, near heaters or air conditioners, or in humid locations. • Do not place cartridges on dashboards or in car storage trays. 28
  • Sony AITI200ST | User Guide - Page 29
    ) - IDLE IMMEDIATE (0xE1) - CHECK POWER MODE (0xE5) - SLEEP (0xE6) - SET FEATURE (0xEF) Supported ATAPI Packet Commands Mandatory ATAPI command set: Supporting most of all SCSI commands in AITi200-A/AITi100-A/AITi50-A. - ERASE - INQUIRY - LOAD/UNLOAD - LOCATE - LOG SELECT - LOG SENSE - MODE SELECT
  • Sony AITI200ST | User Guide - Page 30
    in) Width 101.6 mm (4.0 in) Depth 155.0 mm (6.1 in) 5.25" 41.2 mm (1.62 in) 146.0 mm (5.75 in) 155.0 mm (6.1 in) Mass AITi390-ST AITi200-A/AITi200-ST AITi100-A/AITi50-A/AITi100-ST 3.5" 780 g (27.5 oz.) 780 g (27.5 oz.) 740 g (26.1 oz.) 5.25" 1010 g (35.6 oz.) 1050 g (37.0 oz.) 970 g (34.2 oz
  • Sony AITI200ST | User Guide - Page 31
    AITi200-ST Voltage 5 V +/- 5 % 12 V +/- 10 % Max Ripple 100 mVp-p 150 mVp-p Current Typical Maximum 1.4 A 1.7 A 0.5 A 1.3 A AITi100-A/AITi50-A Voltage Max Ripple 5 V +/- 5 % 100 mVp-p 12 V +/- 10 % 150 mVp-p Current
  • Sony AITI200ST | User Guide - Page 32
    Devices Marketing Hong Kong 45/F, The Lee Gardens, 33 Hysan Avenue, Causeway Bay, Hong Kong TEL: (852) 2909-1008 FAX: (852) 2909-2001 Sony Corporation of Hong Kong Ltd. Beijing Rep. Office Computer Peripheral Div. Full Link Plaza Tower A 11/F., No.18 Chaoyangmenwai Ave., Beijing 100020 P.R.C. TEL
  • Sony AITI200ST | User Guide - Page 33
    Taiwan Limited Optical Devices Storage Dept. Data Storage Section 5F, 145 Changchun Road, Taipei 104, Taiwan TEL: 886-2-2522-7920 FAX: 886-2-2522-2153 Sony Korea Corporation EDMK CP Sales & Marketing Team 34F, ASEM Tower, World Trade Center, 159-1, Samsung-Dong, Kangnam-Ku, Seoul, 135-798, Korea TEL
  • Sony AITI200ST | User Guide - Page 34
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34