Sony ALT-SA32PC To Stabilize S-AIR Reception

©2009 Sony Corporation

Printed in China

4-152-319-

11

(1)

English

To stabilize S-AIR reception

Read the following when S-AIR reception is poor or unstable.

About environments where S-AIR products (S-AIR main unit and sub

unit) are used

S-AIR products use a radio frequency of 2.4 GHz. Certain electronic equipment or other factors may

cause lost connection or instability in S-AIR reception.



Electronic equipment influence

The following may cause interference or cross talk.

Cellular phones, cordless phones

Wireless LAN, personal computers

Game machines using radio signals

Microwave ovens



Other factors

The following may cause poor reception.

Materials or structures, such as walls and floors

The location where an S-AIR product is placed

When using S-AIR products, place them as far as possible from the above electronic equipment, or

place where S-AIR reception is stable.

–

–

–

–

–

–

When S-AIR reception is poor

Check the following.

Keep cords that are connected to the S-AIR product (power supply cord or other cords) away from the

wireless transceiver and slot.

Keep as much space as possible around S-AIR products.

Avoid placing S-AIR products on top of, or directly below, other electronic equipment.

Avoid placing S-AIR products in a closed rack, metal rack, or under a table.

Adjust the location (height, orientation, and place in the room) of S-AIR products until reception is

the most stable.

Place so that the AIR-PC10T and the S-AIR sub unit are closer.

Place so that S-AIR products are separated from other wireless devices.

Place so that S-AIR products are separated from metal doors or tables.

If you cannot improve S-AIR reception, change the “RF CHANGE” setting. For details, refer to the

operating instructions of each S-AIR product.

ALT-SA32PC